BOULT GX Charge User manual

GX Charge
Gx Charge Product specification
How to connect your GX Charge
Turn on the Bluetooth function on your phone.
While in power-off state, press and hold the multifunction
button (MFB) on your neckband for 5 seconds till the red and
blue light flashes alternatively with the “Pairing” sound.
In your phone, select the Bluetooth name “Boult Audio
ProBass” for connecting.
When the pairing is successful, you will hear the “Connected”
sound.
How to use your GX Charge
(A). Power ON/OFF:
Power ON: Press and hold the multifunction button (MFB) for
3 seconds until the blue light flashes.
Power OFF: Press and hold the multifunction button (MFB) for
5 seconds until the red light is on for 2 seconds.
(B). Call Answer
Answer by phone or press the MFB.
(C). Call End
End by your phone or press the MFB.
(D). Call Reject
Reject your phone or press and hold the MFB for 2 seconds.
(E). Last Number Redial
Quickly tap the MFB twice to redial the last dialed phone
number.
(F). Play Music
Press the MFB to play/pause music while the music is
playing.
Product Name – Bluetooth Wireless Earphones
Model – Boult Audio ProBass
Bluetooth Version – V5.2
Speaker – 10mm
Bluetooth Range - ~10m/33ft (without any obstacles)
Neckband Charging Time – 45 mins
Frequency Range - 20Hz - 20KHz
Input - 5V 1A

Turn on the Bluetooth function on your phone.
While in power-off state, press and hold the multifunction
button (MFB) on your neckband for 5 seconds till the red and
blue light flashes alternatively with the “Pairing” sound.
In your phone, select the Bluetooth name “Boult Audio
ProBass” for connecting.
When the pairing is successful, you will hear the “Connected”
sound.
(G). Volume Adjust
Tap the Volume+ or Volume- button to increase or decrease
the volume.
(H). Track Control
Press and hold the Volume+ button to skip to the next song.
Press and hold the Volume- button to play the previous song.
(H). Voice Assistant
Press and hold the MFB button for 2 seconds to activate and
talk to your phone’s voice assistant.
Do’s and Don'ts
Don’t expose the device to extreme temperatures. Use a USB
charger of DC 5V to charge the headset if necessary.
Don’t disassemble, repair, or alter the headset yourself or
through third party vendors.
Don't clean the headset with chemical solvent
Don't discard the headset or put it in a fire or high-tempera-
ture environment in case of danger
Voice Prompts
You will hear “power on” when the headset powers on.
You will hear “power off’ when the headset powers off.
You will hear “connected’ when the headset is paired.
You will hear “low battery” when the headset is in low power
status
Maintenance Instructions
Warranty is valid/invalid only basis of the below criteria:
The product should be purchased through legal and formal
channels to be applicable for warranty.
Damaging the product intentionally/unintentionally, or due
to natural disasters, etc. is not covered in the warranty.
14mm
14mm Drivers
Sky's Choice