Music Man BT-X42 User manual

MusicMan® * User Manual
Active Noise Cancellation In-Ear Headphone BT-X42
With this comfortable and good fitting earphones you
can enjoy wireless music via Bluetooth with
Active Noise Cancellation (ANC)
The manufacturer Technaxx Deutschland GmbH & Co.KG hereby declares that this device,
to which this user manual belongs, complies with the essential requirements of the
standards referred to the Directive RED 2014/53/EU. The Declaration of Conformity you
find here: www.technaxx.de/ (in bar at the bottom “Konformitätserklärung”). Before using
the device the first time, read the user manual carefully.
This device has a rechargeable battery. It must be fully charged before first use.
NOTE: Charge the battery of the device every 2–3 month if it is not used! Turn OFF
nearby Bluetooth devices to avoid signal interference! WARNING: DO NOT TURN
THE VOLUME TOO HIGH – HEARING LOSS MIGHT BE THE RESULT!
Service phone No. for technical support: 01805 012643 (14 cent/minute from German
fixed-line and 42 cent/minute from mobile networks).
Free Email: [email protected]
Warning! Choking hazard. Small parts.
Features
Active Noice Cancellation (ANC) function up to – 26dB with double
microphones (one microphone in each earphone is detecting the
ANC)
Active noise & echo reduction
Wireless In-Ear design
Music transfer (clear stereo sound) & handsfree function via
Bluetooth V4.2
Built-in microphone for telephone calls (reject and answering)
Convenient operation directly on the cable
Pairing with Bluetooth-enabled audio devices, Smartphones,
Tablets, etc.
Soft & tight earphones for comfortable fit
No clutter thanks to magnetic connection of the earphones
Ideal for outdoor and sport activities

Technical specifications
Bluetooth BT version 4.2 / A2DP 1.3, AVRCP 1.5, EDR, class
2, HFP 1.5, ANC / ~10m transmitting distance (open
space)
Bluetooth Transmitting frequency 2.4GHz
Radiated output power max. 2.5mW
Power supply Built-in rechargeable 120mAh lithium polymer battery
3.7V / charging via MicroUSB (DC 5V / 500mA)
Charging time ~2.5 hours
Playing / Talking time ~6 hours (max.VOL) / ~5 hours
Standby time ~100 hours (BT connection, no music)
SNR / THD / Impedance 85dB / 3% / 32Ω
Frequency range 20Hz– 20kHz
ANC –23dB ± 3dB (max. up to –26dB)
Protection class IPX4 (splash water proofed)
Working temperature –10°C up to +50°C
Storage temperature –20°C up to +60°C
Weight / Dimensions 25g / (L complete) 86.0 x (W) 1.2 x (H)
0.8cm / (Length neckband) 41.0cm
Package contents MusicMan® ANC In-Ear Headphone
BT -X42 , Micro USB charging cable, 3
different earbud sizes, User Manual
Hints for Environment Protection: Packages
materials are raw materials and can be recycled. Do
not disposal old devices or batteries into the domestic
waste. Cleaning: Protect the device from
contamination and pollution (use a clean drapery).
Avoid using rough, coarse-grained materials or
solvents/aggressive cleaner. Wipe the cleaned device
accurately. Distributor: Technaxx Deutschland GmbH
& Co.KG, Kruppstr. 105, 60388 Frankfurt a.M.,
Germany
Enjoy your product * Share your experience and opinion on one
of the well-known internet portals

Product overview
1 Neckband 6 Volume up / skip
2 Earphones (speaker) 7 On/Off / Play / Pause
Answer/Reject/End call
3 White LED light
(ANC on/off) 8 Volume down / skip
4 Red & Blue LED light
(charging/standby mode) 9 Microphone for call function
5 ANC function on/off 10 Microphone ANC
Charging
When the earphones indicator flashes RED or does not play any
music, charge your earphones. The charging process takes approx.
2.5 hours.
The LED indicator lights RED while charging and turns to BLUE
when fully charged.
 Unplug the Micro USB charging cable when the earphones are
fully charged. Do not charge longer than recommended.

Pairing
Turn on the Bluetooth function on your Bluetooth-enabled device
and set it to search for Bluetooth devices.
Power off the earphones. Now press and hold the button [7]
for 4 seconds to enter pairing mode. The LED indicator flashes RED
and BLUE as your earphones searches for Bluetooth-enabled
devices.
Select and connect to “MusicMan BT-X42” from the list of found
devices. When paired, the LED Indicator flashes BLUE every 4
seconds and the earphones enters standby mode.
Operation
How to change Bluetooth devices
Your earphone automatically reconnect to the most recently
paired device when it is powered on.
To pair a new device, first you must disconnect the Bluetooth
function of the current device. See the instructions of your Bluetooth
device for details.
General hints before start using the earphones
Do not wear earphones while driving a vehicle or cycling. This can
create a traffic hazard and is not allowed in some countries.
To protect your hearing do not listen at high volume (extended
high-volume listening can lead to permanent hearing loss). Set the
volume to the lowest setting and then adjust to a comfortable level.
Avoid increasing the volume (your ears adapt to volume, so a
level that does not cause discomfort could still damage your
hearing).
How to use ANC (Active Noise Cancellation)
To enable or disable the ANC just press the button [5]. The
WHITE LED will shine when ANC is enabled. The WHITE LED is off
when ANC is disabled.

How to use the earphone functions
Function Button
Operation
Turn on earphones Hold for 2 seconds
Turn off earphones Hold for 4 seconds
Adjust volume / Press 1x for one VOL step
Answer/End a call Press once, while getting
called / to end call
Reject a call Hold for 1–3 seconds
Play/Pause music Press 1x
Previous music track (skip)
Hold for 2 seconds
Next music track (skip) Hold for 2 seconds
Turn on/off Active Noise
Cancellation (ANC) Press 1x
Warnings
Only charge the BT-X42 using the provided Micro USB charging
cable. You also can use an USB charging adapter but ONLY (!) up
to DC 5V/500mA. Do not (!) charge the BT-X42 with more power!
If the BT-X42 fails to link to your mobile device or if it fails to play
music after being connected, the user shall check if your mobile
device supports A2DP. Do not disassemble the BT-X42, it may
result in short-circuit or damage. Do not drop or shake the
BT-X42, it may break internal circuit boards or mechanics. Keep
the BT-X42 in dry and ventilated environment. Avoid high humidity
and high temperature. Also batteries should not be exposed to
excessive heat or direct sunlight. This BT-X42 is not water
resistant; therefore keep it away from moisture. Keep the BT-X42
away from little children.
Keep this user manual for future reference or product sharing
carefully. Do the same with the original accessories for this product.
In case of warranty, please contact the dealer or the store where you
bought this product. Warranty 2 years