bouncepad VESA User manual

Assembly Instructions
Flex
VESA
Flip
Lounge
1.

Contents
VESA
p.38-48
Flip
p.3-18 p.49-58
Lounge
Flex
p.19-37
2.

Assembly Instructions
VESA
2.
3.

What's in the Box
Case Washer x1 T20 Driver Bit x1
M4 Split Washer x4 M4 20mm Buttonhead Screw x4
no.8 x 38mm Countersunk Screw x4
VESA Mount
4.

What's in the Box
Tablet Support x4
Keys x2
Case x1
Faceplate x1
Corner Pieces x4
Cable Clip x1
Sticker x1
Tablet Setup Kit
This Tablet
Configured for
Attach case to mounting arm with hand operated
screwdriver only.
If you would like to use a different tablet in this case,
please contact us for a conversion kit.
www.bouncepad.com
4.
5.

Pencil
Socket Screwdriver
16mm or 41/64" Drill Bit
2mm or 5/64" Drill Bit
Hand Drill
Tools for the Job
6.

Don't install directly
beneath a light source
Avoid Glare
155cm / 5'
Recommended Installation Height
6.
7.

VESA Mount
Mark all four outer holes
and the large central hole
Pencil
IMPORTANT:
Make sure the Lock will
still be accessible once
the case is installed
Mark the Drill Holes
8.

Through Surface
-Hidden Cabling
-Requires access to back
of the Wall
On Surface
-Visible Cabling
-Perfect for Solid Walls
Choose Cable Routing Method
8.
9.

Drill the Holes
16mm
41/64"
2mm
5/64"
2mm
5/64"
2mm
5/64"
NOTE:
The 16mm / 41/64" hole
is only required for 'On
Surface' Mounting
Scale 1:1
IMPORTANT:
2mm / 5/64" holes are
designed for supplied
woodscrews. If using
your own screws eg
when attaching to brick
a different hole size may
be needed
2mm
5/64"
10.

IMPORTANT:
If you have chosen 'On
Surface' cable routing,
the cable must be routed
through cable channel
before screwing to
surface
No.8 38mm Countersunk Screws
VESA Mount
'On Surface' Cable Channel
Attach to Surface
10.
11.

Attach Case
M4 20mm Buttonhead Screws
Case Washer
M4 Split Washers
12.

Route Cable
Cable Clip
Use the adhesive cable
clip to secure cable in
the nearest quadrant to
the Tablet Power Port
12.
13.

Case Setup
Cornerpieces
Tablet Supports
Sticker
14.

Insert Tablet
NOTE:
Ensure Tablet is connected
to Power Cable
14.
15.

Lock Up
Turn Key to Lock
1.
Faceplate
Case
2.
3. 16.

VESA Compatibility
The Bouncepad VESA mount can
also be screwed to VESA arms
(fixings not supplied)
16.
17.

Your Bouncepad is now installed
For further information and
support please contact us:
UK & International
[phone]
[email protected]
www.bouncepad.com
Deutschland
[phone]
[email protected]
www.bouncepad.com/de
USA & Canada
1-617-804-0110
[email protected]
www.bouncepad.com/us
18.

Assembly Instructions
Flex
18.
19.

What's in the Box
Surface Mounting
Plate x1
Surface Mounting Plate
Cover x1
Case Washer x1 Through Mounting
Washer x1
T20 Driver Bit x1
M4 Wingnut x4
M4 Split Washer x8
M4 10mm Countersunk Screw x4 M4 Hex Nut x4
M4 16mm Buttonhead Screw x4
M4 40mm Socket Setscrew x4
No.8 38mm Countersunk Screw x4
Flex Stalk 20.