Flexispot EC8B User manual

Item No. EC8B / EC8S / EC8W
Installation Guide
Website: www.flexispot.com
Tel: [phone]

Specifications
Accessory Package
Parts Included
Step 1
01 02
Max. Weight Capacity 275 Ibs (125 kg)
Input Voltage 100 - 240 V
Adjustable Height 23.6" - 49.2" (600 - 1250 mm)
Wide Expand 43.36" - 74.8" (1100 - 1900 mm)
Duty Cycle 10% (Working 2 minutes then stop 18 minutes)
Figures shown are for reference only. Please contact customer service if there are any accessories or
tools missing.
Diagram of Components
1
NO. Parts Qty
3
5
7
2
Step 2
2
NO. Parts Qty
4
6
2
1
1
1
2
1
Handset (Optional)
A
M6
B C D E
St4.2
F
4x4M6M6M6
x4 x4 x8 x12 x16 x1
Pedestal Lifting column
Baffle Supporting beam
(including control box)
Install the lifting column (2)
Attaching the beam (4) to the lifting column (2) using 8 M6x12mm bolts (D).
Tighten with 4x4 hex key (F).
Connecting cable
Dx8
F
4x4
Bracket
F
4x4
Ax4
Attaching the brackets (5) to the beam (4) using 4 M6 bolts (A). Tighten with 4x4 hex key (F).

Step 3
03
Step 4
04
Step 6
2
1
2
3
Step 5
Power port
Port for cable
connected to
the leg
Port for
handset
Install the pedestal (1)
Attaching the lifting column (2) to the pedestal (1) using 8 M6x16mm bolts (C).
Tighten with 4x4 hex key (F).
Install the desktop
Use method 2 in Step 6 to install the desktop, when the
desk frame is stretched to more than 1720mm.
Install the handset and control box.
Connect the cables to the control box as shown in the diagram below.
Method 1
First screw the M6 bolts (B) to the supporting beam (4) by using 4x4 hex key (F), not too tight.
Then press one side of baffle (3) and make it inserted to the M6 bolts (B), then insert the other
side. After that, tighten the M6 bolts (B) up.
1. Insert one side of baffle (3).
2. Press the other side of baffle (3).
3. Tighten
Method 2
Tighten
Loosen
Stretch
Cx8
F
4x4
Bx4
F
4x4
Ex12
Bx4
F
4x4
Dx4
Install baffle
F
4x4
1
A C
H S M 1 M 2 D C
Adjust the distance according to the actual
size of the desktop.
Install the baffle (3) like method 1 in Step 6.
Note:
The supporting beam can not be
stretched exceeding this hole.
When the desk frame is stretched
to more than 1720mm, install
the baffle (3) to the middle connecting
bar in beam(4).

05 06
Troubleshooting
This list is used for checking and solving common faults and errors. Please contact the manufacturer if
problem you encounter is not on the list below.
Problem
No response when pressing the UP
button and DOWN button
No response when pressing and
holding the DOWN button
The distance lifted or lowered is not
accurate
Overworked beyond duty cycle:
Max 2 min on/18 min off
Automatically reset a lot
Worksurface downward sliding
Can lift but cannot lower down
Motor does not work properly
Speed of lifting is slow
Solution
1. Check the cable connection.
2. Contact the distributor or the manufacturer.
1. Check the cable connection.
2. Contact the distributor or the manufacturer.
1. Check if the load weighs more than .275 Ibs
2. Contact the distributor or the manufacturer.
1. Contact the distributor or the manufacturer.
1. Start the reset process.
2. Contact the distributor or the manufacturer.
1. Check if the load weighs more than .275 Ibs
2. Contact the distributor or the manufacturer.
1. Check if the load weighs more than .275 Ibs
2. Contact the distributor or the manufacturer.
1. Keep the power on and stop working for
18 minutes.
2. Contact the distributor or the manufacturer.
1. Press and hold the "M" and " " button for
three seconds until you hear BEEP twice
to restore the factory settings.
2. Contact the distributor or the manufacturer.
Handset Instruction
Handset
LED Display
Product parameters
1.Button introduction: there are 7 buttons in total, including "▲", "▼", "1", "2", " ", " ", "M"
(1) "▲": UP Button, used to raise the desk surface;
(2) "▼": DOWN Button, used to lower the desk surface;
(3) "1": Position 1, saves the 1st height position;
(4) "2": Position 2, saves the 2nd height position;
(5) " ": Position , the display shows the number 3 and saves the standing height position;
(6) " ": Position , the display shows the number 4 and saves the seat height position;
(7) "M": SAVE button, used to save the height position and child lock: security lock.
Operation Guide
·Child lock function:
a. When the child lock is turned on, the blue child lock indicator light ( and M directly above)
will light up.
b. Press the button indicator to flash once.
c. To immobilise or unlock the child lock, press and hold the M button for about 5 seconds.
d. All the keys will work normally after immobilising the child lock function.
·Button lift function:
The height of the table can be adjusted up or down by pressing the "▲"or "▼" button and the current
height will show on the display.
·Saving height function:
a. Press the UP or DOWN button to adjust the height of the desk surface. Press the "M" save button
and the display will show " ". Then press "1", "2", " " or " " button and save the height to the
corresponding position 1, 2, 3 or 4. The display will show " ", " ", " " or " ";
b. Press "1", "2", " "or " ", and the height-adjustable desk will adjust automatically to the previously
saved position.
·Adjust the sensitivity of anti-collision:
a. Keep pressing the "▲ " and "▼" button at the same time for 5 seconds to switch the sensitivity to
level 1, 2 or 3.
b. When the display shows " ", it signifies low sensitivity. " " signifies medium sensitivity and " "
signifies high sensitivity.
c. Anti-collision operates when an obstruction is detected while moving up or down. The desk will
stop automatically and move in the opposite direction for a short distance.
·Reset function and Troubleshooting:
a. Reset function definition: When the LED display shows " ", press and hold the "▼" button until
the desk reaches its lowest height and the display will show the lowest height. The reset process is
then complete.
b. If the exception code E01 or E02 occurs, please retry 18 minutes later. c. If the "▼" button doesn't
work, please check the cable connection and switch off the power for at least 10 seconds. Switch on
the power, press the "▼" button and the LED display will show " ". Then start the reset process by
pressing the "▼" button.
>

07 08
Recycling and Disposal
This product cannot be disposed of as household waste. To prevent damage to the
environment, this product should be recycled. Please use the relevant recycling
systems available to you or contract the distributor or manufacturer for recycling
assistance.
Attention
·Power supply: AC100V - 240V, frequency 50/60HZ;
·Working environment: 32º - 104º F;
·Before cleaning, you have to unplug the power supply cable. Clean with a slightly damp cloth to
wipe away the surface dust. Keep all electrical components away from liquids. Do not damage the
connection line and keep the plug in a safe position.
·Inside the control box, there are electronic components, metal parts, plastic parts, wires and so on.
They should be disposed in accordance with the local laws and regulations. They cannot be disposed
as household waste.
·Before using the product, please make sure the product has been installed correctly.
·Before starting use of the product, please read the instructions to fully understand all the product's
functions and settings.
·Keep children away from electric height-adjustable desks, control units and handsets.
Manufacturer is not responsible of any damages that result from children's unpredictable behaviour.
·Slight noise caused by the multi wedge belt or brake system will not impact the use of this product.
·Do not use corrosive or abrasive materials to clean this product and please dispose of cleaning
solutions in an environmentally friendly manner.
·Understand the risks associated with using this product. Children or those with cognitive impairment
should not use this product without supervision.
·If the power supply cord is damaged or broken, it must be replaced by the manufacturer or a relevant
specialist to avoid any injuries.
·Please operate in a clean and safe environment. For example, do not left around your tools. And
always be careful to deal with packaging materials, in order to avoid any kinds of possible danger.
Potential chocking risk exists when children play with plastic bags!
·If necessary, retain the original package for future transportation.

FlexiSpot Limited Warranty
This limited warranty offered by FlexiSpot covers defects in material or workmanship in new
FlexiSpot products. This warranty extends to the original purchaser only and is non-transferable.
Only consumers purchasing FlexiSpot products from authorized FlexiSpot retailers or resellers
may benefit from our limited warranty.
What is Covered?
The FlexiSpot limited warranty covers our products against defects in material or workmanship
as follows:
·FlexiSpot Height Adjustable Desks
All height-adjustable desks that were purchased on or after October 5, 2016 come with a 5 years
warranty for the frame and a 3-year warranty for the motor, desk frame components, mechanical
parts, and electrical components, except for the Modish Standing Desk which has a 7-year
warranty for the desk frame and a 1-year warranty for its tabletop.
·FlexiSpot Sit-Stand Desktop Workstations
All standing desks purchased on or after October 5, 2016 include a 5-year warranty for the frame,
medium-fiber desktop and mechanisms.
·FlexiSpot Desk Bikes
All desk bikes purchased on or after October 5, 2016 include a 3-year warranty for the frame, and
a 1-year warranty for the electronics and other mechanisms.
·FlexiSpot Mini Steppers
All desk bikes purchased on or after October 5, 2016 include a 1-year warranty for the frame, and
other mechanisms.
·Accessories
All monitor mounts purchased on or after October 5, 2016 include a 5-year warranty for the arms,
3-year warranty for gas spring system and mechanisms.
What are your Remedies?
FlexiSpot will replace at no charge to the consumer the defective parts only or, at FlexiSpot's
option, replace any product or part of the product that is defective because of improper
workmanship and/or material, under normal installation, use, service and maintenance. If
FlexiSpot is unable to provide a replacement and repair is not practical or cannot be completed in
a timely fashion, FlexiSpot may elect to refund the purchase price in exchange for the return of
the product. In the rare event that your FlexiSpot product is defective, we will provide you with a
replacement item shipped at no cost to you within the continental United States. The shipping
method for replacement products is FedEx Ground, but expedited shipping is available if you
choose to pay the additional expense. In addition, you will need to pay the shipping costs if any
products need to be shipped to you at an address outside the continental United States.
REPAIR OR REPLACEMENT (OR, IN LIMITED CIRCUMSTANCES, REFUND OF THE
PURCHASE PRICE) AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY
OF THE PURCHASER. NEITHER ASSUMES NOR AUTHORIZES ANY PERSON FLEXISPOT
TO CREATE FOR IT ANY OTHER OBLIGATION OR LIABILITY IN CONNECTION WITH THIS
PRODUCT.
What is Not Covered?
Our limited warranty does not cover any problem that is caused by:
1. Conditions, malfunctions or damage not resulting from defects in material or workmanship.
2. Conditions, malfunctions or damage resulting from normal wear and tear, improper
installation, improper maintenance, misuse, abuse, negligence, accident or alteration.
3. Accessories, connected materials and products, or related products not manufactured by
FlexiSpot.
4. Conditions, malfunctions or damage resulting from failure to follow the instructions and
guidelines relating to the product's intended use.
Our limited warranty is void if a product is returned with removed, damaged or tampered labels
or any alterations (including removal of any component or external cover).
How to File a Claim?
In order to receive the benefit of our limited warranty, you need to process your claim in
compliance with the terms of this limited warranty and follow proper return procedure. To
request warranty service, please contact customer service via email at [email protected]
or toll free at 855-421-2808. You will need to provide the sales receipt or other evidence of the
date and place of purchase for your FlexiSpot product.
Implied Warranties and Limitation of Damages
EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ALL IMPLIED WARRANTIES
(INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE) SHALL BE LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY,
AND SHALL NOT BE LIABLE FOR ANY INCIDENTAL, INDIRECT, SPECIAL, OR FLEXISPOT
CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO LOSS OF PROFITS OR
REVENUE, RESULTING FROM ANY BREACH OF EXPRESS OR IMPLIED WARRANTY OR
CONDITION, OR UNDER ANY OTHER LEGAL THEORY, EVEN IF HAS BEEN FLEXISPOT
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Some jurisdictions do not allow
limitations on the duration of an implied warranty or the exclusion or limitation of special,
indirect, incidental or consequential damages, so the above limitations or exclusions may not
apply to you.
Governing Law
This Warranty shall be governed by the laws of the State of California, USA, without giving
effect to any conflict of laws principles that may provide the application of the law of another
jurisdiction.
How State Law Applies
This Warranty gives you specific legal rights, and you may also have other rights which vary
from state to state.
09 10
FlexiSpot Limited Warranty