BOXLIGHT ProColor IFPD User manual

For using this product properly and safely, please follow the
contents of the Installation and Operation Manual to install.
It is suggested that this Electric Stand applies to the 55-75
inch intelligent panel.
This stand can carry a maximum weight of 100KG.

1
Accessories
Base (1pcs)
Lifting column (1pcs)
Wall Mount (1pcs)
shelf(1pcs)
Control pad box
Hanging bar (2pcs)
Control pad (1pcs)
AC Power Cable (1pcs)
USB transferable Cable(1pcs)
AC Power transferable Cable (1pcs)
A-Base(1pcs) B-Lifting column -(1pcs)
C-Wall Mount (1pcs)
D-shelf(1pcs)
E- Control pad box
F- Hanging bar (2pcs)
G-Control pad (1pcs) H-AC Power Cable
(1pcs)
I-USB transferable Cable
(1pcs)
J-AC Power transferable
Cable (1pcs)
Other accessories：
①Hexagon socket
countersunk head screws
KM10*25
4pcs
②Cross recessed pocket
hexagon head screw
M8*25
8pcs
③Cross recessed pocket
hexagon head screw
M5*15
2pcs
④Cross recessed T-head
with collar screw
TM4*6
9pcs
⑤Plastic bolts
/
4pcs
⑥Hex nut
6mm
1pcs
⑦Cross recessed pocket
hexagon head screw
M6*20
4pcs
⑧Cross screwdriver
(Self-Provided)
/
1pcs
⑨Monkey spanner
(Self-Provided)
/
1pcs

2
Step1: Install the Wall Mount C on the lifting column B (figure 1).
B
C
figure 1

3
Step2: Install the shelf D on the lifting column B(figure 2).
figure 2

4
Step3: Connect the power cable between the lifting column B and the
base A, install the lifting column and tighten the screws (figure 3).
A
figure 3
3

5
5
Step5: When using the Electric Stand, the control pad and the AC power
cable should be connected to the Electric Stand, and connected to the
power supply (figure 5).
G
H
figure 5
4
Step4: Install the Control pad box E on the lifting column B (figure 4).
E
figure 4

6
7
Step7: Assemble the Interactive Flat Panel and hanging bar F with right
screw（②or⑦）based on actual use demand. (figure 7).
K
②or⑦
K
Munting hole K
1
8
15
18
②or⑦
F
figure 7
6
Step6: Turn the Wall Mount C from horizontal to vertical. For details, refer
to the Quick Start Guide.(figure 6).
figure 6
Recommended mounting hole
Panel size
K==>all
55"
K==>8~18
65"
K==>15~18
70"
K==>18
75"
The specific installation holes can be adjusted
according to the actual needs, refer to the
installation height of the intelligent panel.

7
9
Step9: Plugging the AC Power transferable Cable and the USB
transferable Cable in, user can interact with the Interactive Flat Panel
(figure 9).
I
J
figure 9
8
Step8: Hang the Interactive Flat Panel to the Electric Stand by Wall Mount,
and tighten the screws (figure 8).
3
figure 8

8
10
Step10: Done, as shown in figure 10.
figure 10