Boya BY-MA2 User manual

1
2
3
5
7
6
8
4
Introduction Specication
How to use
Main Features
Thanks for purchasing BOYA!
2) Attach the audio mixer on the camera cage
The Boya BY-MA2 is a 2-channels XLR audio mixer which is
designed for DSLRs, camcorders and other devices which
has 3.5mm TRS audio jack. BY-MA2 has 2 XLR audio inputs
that allow 2 external XLR wireless microphone receivers or
XLR shotgun microphones to be used on it. With BY-MA2,
it can help to improve the build-in sound performance
and audio quality on camcorders or DSLRs.
BY-MA2 also comes with built in combo 6.35mm jack which
allows for instrument inputs such as guitar or other instru-
ments that has 6.35mm output jack.
Built in with a standard 19mm bolt rod, BY-MA2 can be easily
attached on any camera cages that with a 19mm rod.
Meanwhile a 15mm bolt rod adapter is included which allows
it to be compatible with any cages with a 15mm rod. At the
bottom, it has 3 standard 1/4”-20 female threads that enable
this audio mixer be able to connect to any camera cages(with
1/4 accessory holes) via a 1/4”-20 screw, or it can be located
on the hot-shoe of DSLR cameras directly after the included
cold-shoe mount adapter is well installed.
1. Audio mixer
2. 1/4 cold shoe mount
3. 15mm rod tube adapter
1. Mount the BY-MA2 on the camera hot-shoe after the
included cold shoe adapter is well installed, or it can be
attached to 19/15mm camera cage rods. Beside these, it
can be also connected to any camera cage (with 1/4
accessory holes ) via a 1/4”-20 screw.
1) Install the cold shoe adapter, and mount the audio mixer
adapter on camera hot shoe
2. Connect the 3.5mm audio adapter cable to your DSLRs
or camcorders
3. Plug the microphone to XLR1 and XLR2
4. Choose the correct settings, XLR1/MIXER/XLR2
1) Pls switch o AGC function of your camera and camcorder
2) Pls use self powered camera XLR microphone or wireless
mic
3) Set the XLR1/MIX / XLR2 switch
- Switch to XLR1, the camera will only record the XLR1
mic sound
- Switch to XLR2, the camera will only record the XLR2
mic sound
- Switch to mixer, the camera will get a mixed sound
from both XLR1 & XLR2
4) If your camera have a headphone jack, you can plug
headphone on the camera and monitor the audio.
1. 3.5mm output connector
2. 1/4”-20 female threads
3. Combo XLR and 6.35mm audio input1
4. Combo XLR and 6.35mm audio input2
5. On/o switch
6. 19mm rod hole
7. 15mm rod adapter
8. Cold shoe adapter
Attach the mixer on any 19mm camera baseplate rod
Attach it to any DSLR hot shoe
It neither require battery nor provide phantom power
1. 19mm bold rod
2. 15mm rod tube adapter
Attach the mixer on any 15mm camera baseplate rod
3. XLR1/ MIX / XLR2 switches
4. Cold shoe mount adapter
5. Passive operation
6. Die cast aluminum chassis
Dual channel XLR audio mixer
for DSLRs & camcorders
Package contents
www.boya-mic.com
www.jiayz.com
BY-MA2
XLR 1
MIX
XLR 2
NOTE
MIC 1
MIC 2
SHENZHEN JIAYZ PHOTO INDUSTRIAL., LTD.
The BOYA logo is a trademark which is registered and owned by
Shenzhen Jiayz Photo Industrial., Ltd.
COPY RIGHT 2010-2020
Email: [email protected]

BY-MA2说明书
吴蒙蒙/2018/8/8
BY-MA2说明书
V00
1 ：1
尺寸：80x120mm 1PCS
V00
1F14015BY0115
105g双铜纸 双面印刷4折页