boytone BT-324F User manual

NO.1
NO.2
Front panel
Thank you for your purchase of an authenic
BOYTONE® product. Prior to first use, please read
this manual carefully.
BT-324F
NO.3
2.1CH MULTIMEDIA SPEAKER SYSTEM
Operation explanation:
Features:

Quality 2.1 speaker system with built-in amplifier

Full audio spectrum performances, ideal for your favourite entertainment
from Mp3, Mp4, CD/DVD movies and digital playbacks

Specially designed woofer cabinet for bass and resolution

Comes with remote control and 3.5mm stereo connection
~120V/60Hz
20W+10Wx2(RMS)
3" x2 5" subwoofer
Package contents:
W160xH277xD334(mm)
W105xH170xD110(mm)
subwoofer cabinet 1 pc
satellite speakers 2 pcs
User manual 1 pc
Audio input cord 1 pc
remote control 1 pc
Using the Remote Control
www.boytone.com
ST-BY/PLAY/PAUSE-----Press to turn on speaker, long press into stand-by.
PLAY/PAUSE in USB/SD/BT mode.
SOURCE-----Change the input mode.
TONE ----- Press TONE to select TREBLE or BASS. Use the volume
knob to adjust the TREBLE -6~+6, BASS 00~30.
VOLUME-/+ -----Volume down/up.
TUNING+/NEXT -----Press to increase the FM frequency 0.1Mhz,
long press to start seek mode for radio.
In USB/SD/BT mode, press “ NEXT ” for next song.
TUNING-/PREVIOUS -----Press to decrease the FM frequency 0.1Mhz,
long press to start search mode for FM Radio.
In USB/SD/BT mode, press “ PREVIOUS ” for
previous song.
1. ST-BY/
5. TUNING+/
2. SOURCE
4. TUNING-/
3. TONE
6. VOLUME+/-
(1)(2) (3)(4) (5) (6)
FM ANT 1 pc
6
1. STAND-BY
2. MUTE
3. SOURCE
4. TONE
5. MEMORY
6. 0~9
7. VOL+/-
8. TUNE+/-
9. LED EFFECT
10. PREV/|<<
11. NEXT/>>|
12.PLAY/PAUSE
VOL+
LED
TONE MEMORY
TUNE+
TUNE-
VOL-
SOURCE
(1)
(3)
(7)
(4)
(8)
(10)
(6)
(7)
(2)
(9)
(5)
(8)
(11)
(12)
1. “ST-BY” - standby mode
2.“MUTE” - activates or deactivates mute.
3.“SOURCE” - select the AUX , DVD ,USB/SD,FM,BL input modes and the
LED display will show “Au18” for AUX mode, “Du18” for DVD mode, “87.5” for
FM mode and “BL” for Bluetooth mode.
4.“TONE” to adjust “TREBLE” and “BASS” Use “VOL+/-” to increase or
decrease “TREBLE” or “BASS” levels.
5. When in FM Radio mode, press“MEMORY” and the station displayed will
flash/blink. The machine is in station memorization mode. You can change
the station by pressing “NEXT”or “PREV” and pressing “PLAY/PAUSE” will
save that station for that station number. Automatic seek and save can be
done by pressing “MEMORY” for 3-5 seconds
(Note: Previous saved channels will be deleted when you press
“MEMORY”for 3-5 seconds.

NO.5
* Do not leave objects generating magnetism near the speakers.
NO.7
NO.6
NO.4
System connection diagram Please pay attention to the following items:
Rear panel
SPEAKER TERMINALS
Connect the left & right channel satellite to 2.1 speaker output
terminals.
1. ANTENNA
2. AUX/DVD INPUT:
Connet to sound sources such as computer,CD Player,MP3,etc.
3. Output: Connet the satellite speakers.
4. AC IN: AC Power cord
(2)
(4)
(3)
(1)
DVD
DVD
LR
6. When in USB/SD mode. “NEXT/>>” for next song; “PREV/<<” for
previous song; “PLAY/>/PAUSE/||” for play/pause; pressing “0-9” on the
remote will play the corresponding song.
7. VOL+/- to increase or decrease volume.
8.“TUNING-/TUNING+ to adjust FM Radio frequency. Long press to fast
scroll through frequencies without pause.
9.“LED” effect - press to change effect. Long press to deactivate.
10.“PREV” for previous song in USB/SD mode.
11.“NEXT” for next song in USB/SD mode.
12. "Play/Pause" to play and pause...but you definitely knew that
CONNECTING YOUR BLUETOOTH DEVICE:
1. Press "SOURCE" until you are in "bL" mode. You will hear beeping.
2. Activate Bluetoothe and search for "BT Speaker" on your transmitting
device (phone, tablet, pc, etc.)
*if the remote control doesn't function, it is probably the battery of
remote control being dead. Change 'em. Thank you.