B+B SmartWorx ESWGP206-2SFP-T User manual

ESWGP206‐2SFP‐T
User Manual

2
International Headquarters
B+B SmartWorx.
707 Dayton Road
Ottawa, IL 61350 USA
Phone [phone] -- General Fax [phone]
Website: www.imcnetworks.com
[e-mail]
European Headquarters
B+B SmartWorx
Westlink Commercial Park
Oranmore, Co. Galway, Ireland
Phone [phone] -- Fax [phone]
Document: ESWGP206‐2SFP‐T_3515m

3
CONTENTS
Figures ...........................................................................................................................................................................4
Tables.............................................................................................................................................................................4
Radio Frequency Interference Statement .....................................................................................................................5
Warranty........................................................................................................................................................................6
Contents of Package ......................................................................................................................................................7
Product Description .......................................................................................................................................................8
Features .....................................................................................................................................................................8
Hardware .......................................................................................................................................................................9
LED Description..........................................................................................................................................................9
POE RESET..................................................................................................................................................................9
Din Rail Mounting ....................................................................................................................................................10
Panel Mounting .......................................................................................................................................................10
RJ45 ETHERNET Connection ....................................................................................................................................11
Pin Assignments.......................................................................................................................................................12
SFP Installation and Connection ..................................................................................................................................13
Power Input Connections ........................................................................................................................................14
Specifications...............................................................................................................................................................15
Compliance and Disposal.............................................................................................................................................17
Dimensional Drawing...................................................................................................................................................18
B+B SmartWorx Technical Support..............................................................................................................................19

4
FIGURES
Figure 1. PoE reset.........................................................................................................................................................9
Figure 2. Din rail mounting ..........................................................................................................................................10
Figure 3. Panel mounting.............................................................................................................................................10
Figure 4. Ethernet connection .....................................................................................................................................11
Figure 5. Ethernet connection .....................................................................................................................................12
Figure 6. Triangle Mark................................................................................................................................................13
Figure 7. LC Connector to the Transceiver...................................................................................................................14
Figure 8. Power Input Connections .............................................................................................................................14
Figure 9: Dimensional drawing ....................................................................................................................................18
TABLES
Table 1. LED description ................................................................................................................................................9
Table 2. Pin assignments .............................................................................................................................................12
Table 3. Specifications .................................................................................................................................................15
Table 4. Certifications ..................................................................................................................................................16

5
RADIO FREQUENCY INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class A computing device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference in which the user will be required to correct the interference at his own expense.
Any changes or modifications not expressly approved by the manufacturer could void the user's authority
to operate the equipment.
The use of non-shielded I/O cables may not guarantee compliance with FCC RFI limits. This digital apparatus does
not exceed the Class A limits for radio noise emission from digital apparatus set out in the Radio Interference
Regulation of the Canadian Department of Communications.
Le présent appareil numérique n'émet pas de bruits radioélectriques dépassant les limites applicables aux
appareils numériques de classe A prescrites dans le Règlement sur le brouillage radioélectrique publié par le
ministère des Communications du Canada.

6
WARRANTY
Effective for products of B+B SmartWorx shipped on or after May 1, 2013, B+B SmartWorx warrants that
each such product shall be free from defects in material and workmanship for its lifetime. This limited
lifetime warranty is applicable solely to the original user and is not transferable. This warranty is expressly
conditioned upon proper storage, installation, connection, operation and maintenance of products in accordance
with their written specifications.
Pursuant to the warranty, within the warranty period, B+B SmartWorx, at its option will:
1. Replace the product with a functional equivalent;
2. Repair the product;
3. Provide a partial refund of purchase price based on a depreciated value.
Products of other manufacturers sold by B+B SmartWorx are not subject to any warranty
or indemnity offered by B+B SmartWorx, but may be subject to the warranties of the other manufacturers.
Power supplies are limited to a six year warranty.
Notwithstanding the foregoing, under no circumstances shall B+B SmartWorx have any warranty obligations
or any other liability for: (i) any defects resulting from wear and tear, accident, improper use by the buyer or use
by any third party except in accordance with the written instructions or advice of the B+B SmartWorx or
the manufacturer of the products, including without limitation surge and over voltage conditions that exceed
specified ratings, (ii) any products which have been adjusted, modified or repaired by any party other than
B+B SmartWorx or (iii) any descriptions, illustrations, figures as to performance, drawings and particulars of
weights and dimensions contained in the B+B SmartWorx catalogs, price lists, marketing materials or elsewhere
since they are merely intended to represent a general idea of the products and do not form part of this price quote
and do not constitute a warranty of any kind, whether express or implied, as to any of the B+B
SmartWorx products.
THE REPAIR OR REPLACEMENT OF THE DEFECTIVE ITEMS IN ACCORDANCE WITH THE EXPRESS WARRANTY SET
FORTH ABOVE IS B+B SMARTWORX SOLE OBLIGATION UNDER THIS WARRANTY. THE WARRANTY CONTAINED IN
THIS SECTION SHALL EXTEND TO THE ORIGINAL USER ONLY, IS IN LIEU OF ANY AND ALL OTHER WARRANTIES,
EXPRESS OR IMPLIED, AND ALL SUCH WARRANTIES AND INDEMNITIES ARE EXPRESSLY DISCLAIMED, INCLUDING
WITHOUT LIMITATION (I) THE IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND OF
MERCHANTABILITY AND (II) ANY WARRANTY THAT THE PRODUCTS ARE DO NOT INFRINGE OR VIOLATE THE
INTELLECTUAL PROPERTY RIGHTS OF ANY THIRD PARTY. IN NO EVENT SHALL B+B SMARTWORX BE LIABLE FOR
LOSS OF BUSINESS, LOSS OF USE OR OF DATA INTERRUPTION OF BUSINESS, LOST PROFITS OR GOODWILL OR
OTHER SPECIAL, INCIDENTAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES B+B SMARTWORX SHALL DISREGARD
AND NOT BE BOUND BY ANY REPRESENTATIONS, WARRANTIES OR INDEMNITIES MADE BY ANY OTHER PERSON,
INCLUDING WITHOUT LIMITATION EMPLOYEES, DISTRIBUTORS, RESELLERS OR DEALERS OF B+B SMARTWORX
WHICH ARE INCONSISTENT WITH THE WARRANTY, SET FORTH ABOVE.

7
CONTENTS OF PACKAGE
The package includes:
• B+B Ethernet switch with attached DIN rail clip
• Printed Quick Start Guide
• 4-panel mounting clips with screws
You may download the user manual at any time from the B+B SmartWorx/IMC Networks web site:
www.imcnetworks.com

8
PRODUCT DESCRIPTION
The ESWGP206-2SFP-T is a plug-and-play, POE+, unmanaged, industrial Ethernet Switches with IP30 protection. It
provides four 10/100/1000Mbps copper ports and two SFP ports for 1000Mbps speed. The fiber SFP port (Port #6)
can accommodate both Single-mode and Multi-mode fiber. The SFP port (Port #5) supports 10/100/1000 or
1000Mbps copper SFPs and gigabit fiber SFPs, for both Single-mode and Multi-mode fiber. This switch supports
IEEE 802.3 for 10Base-T, IEEE 802.3u for 100BaseTX and 100BaseFX. It is both DIN rail mountable and panel
mountable.
The ESWGP206‐2SFP‐T supports IEEE802.3x for flow control, full and half duplex, and provides Auto Cross for the
copper ports. Each 10/100/1000Mbps port supports auto negotiation and is 802.af/at compliant for POE/ POE+.
As a POE product, it supports detect legacy/pre-standard PD devices. It also provides PD real-time protection
through the following mechanisms: overload, under-load, over-voltage, over-temperature, and short-circuit. It
supports up to 9720 byte jumbo frames
The ESWGP206‐2SFP‐T accepts 24-52VDC input voltage with dual power input using terminal blocks. The operating
temperature range is -40˚C to 85˚C (Wide Temperature Type) with an ambient relative humidity rating of 5 to 95%
(Non- condensing).
FEATURES
•10/100/1000Base-T Auto-Negotiation
•IEEE802.3af and IEEE802.3at, including two-event classification
•Supports legacy PD devices
•Unmanaged, Plug and Play
•Full and Half Duplex
•Auto Cross feature for the RJ-45 copper port
•Four 10/100/1000 copper POE+ ports
•Two SFP ports
•Each POE+ port supports a maximum of 30W power for a PD device
•PoE+ Reset function: included HW reset PoE and auto detect SFP uplink port status to detect
shut down PoE function or not, set by DIP switch
•IP30 metal enclosure
•Din-rail mount, panel mount
•Redundant dual VDC power inputs, 24 –52 VDC
•Max Power Consumption 130W
•UL standard for safety of industrial control equipment (IEC/UL/EN)
•Shock, vibration, and freefall
•MAC address capability: 4K
•Broadcast Storm Protection: disabled
•Operation Temperature:-40˚C to 85˚C

9
HARDWARE
LED DESCRIPTION
LED
Status
Description
PWR (P1, P2)
Green On
Power Applied
STA
Green Flashing
System State
LNK LED
Green On
Link established
Green Flashing
Data is being transmitted
SPD LED
Green On
1000 Mbps
Orange On
100 Mbps
Off
10 Mbps
MAX LED
Green On
POE Power over max load
POE+(1/2/3/4)
Green On
POE port providing power
L1/L2
Green On
Link established
Green Flashing
Optical link’s data transmitted
Table 1. LED description
POE RESET
Figure 1. PoE reset
There are two PoE DIP Switches: one for a Hardware Reset (HW RESET) and one for an Auto Reset (AUTO RESET).
Hardware Reset: when the DIP Switch #1 is set to the ON position, the PoE function will be turned off, and the
power sourcing for a PD device is unavailable. However, the port can still provide an Ethernet connection to any
device not requiring Power over Ethernet.
Auto Reset: when DIP Switch #2 is set to the ON position, the PoE reset function is enabled. This supports a reset
of the remote PD device. The real advantage is not requiring someone to go to the remote site to reset the switch.
If both SFP port’s LEDs show a link down condition, the PoE function (power sourcing) will be disabled to save
power. If at least one of the SFP ports has an active link, the PoE function will work. If DIP Switch #2 is set to OFF,
the Auto Reset function is disabled and cannot save power under link down conditions for the SFP ports.

10
DIN RAIL MOUNTING
The DIN rail mounting clips are connected to the switch when shipped and are ready to be mounted on
a 35mm size DIN rail.
Figure 2. Din rail mounting
PANEL MOUNTING
Figure 3. Panel mounting

11
RJ45 ETHERNET CONNECTION
All copper ports on the switch support the Auto Cross feature, which allows the end user to use a
Straight-through or Crossover cable.
Figure 4. Ethernet connection

12
Figure 5. Ethernet connection
PIN ASSIGNMENTS
PIN#
Signal Direction
10/100M
PoE & PoE+ Pinout
(ALT-A)
1
Out*
V+
2
Out*
V+
3
IN*
V-
4
5
6
IN*
V-
7
8
Table 2. Pin assignments

13
SFP INSTALLATION AND CONNECTION
To connect the transceiver and fiber cable, follow the steps below. The SFP port is not proprietary. Any
MSA-compliant 1000Mbps fiber SFP can be installed in the port. (Note: SFP modules typically offer an LC
fiber connector). One of the SFP ports allows fiber SFPs only, please refer to information in the
Specification table.
First, insert the SFP transceiver into the SFP module cage. Notice that the triangle mark is at the bottom
of the module.
Figure 6. Triangle Mark
Next, insert the fiber cable into the transceiver.

14
Figure 7. LC Connector to the Transceiver
Last, remove the SFP and gently pull out of the cage manually.
POWER INPUT CONNECTIONS
ESWGP206-2SFP-T accepts 24V~52VDC input voltage using terminal blocks.
Figure 8. Power Input Connections

15
SPECIFICATIONS
Technology
Standard
IEEE802.3, 802.3u, 802.3x, 802.3z, 802.3ab, 802.3af/at
Processing Type
Store and forward
Broadcast Storm
Disabled
Flow Control
Full Duplex Flow Control, Half Duplex Back Pressure Control
Protocols
CSMA/CD (Carrier Sense Multiple Access/Collision Detect)
Switch Properties
MAC Table Size
4K
Packet Buffer Size
128K
Jumbo Frame Size
Supports up to 9720 bytes
Interface
RJ-45 Port
Auto-negotiation 10/100/1000Base-T, Full/Half Duplex, Auto-MDI/MDIX
SFP Ports
SFP form factor for MSA-compliant Gigabit SFPs
(Port #5: Copper or Fiber, Port#6: Fiber)
PoE+ Pinout
V+, V+, V-, V-, for pin 1,2,3,6
LED Indicators
P1, P2, 10/100/1000Mbps, POE+ (1~4)
DIP Switches
PoE reset on SFP down - ON/OFF
Power Requirements
Input Voltage
25 to 52VDC redundant power inputs
Power Budget
130W MAX
Input Connection
Standard 4-pin terminal block
Physical Characteristics
Case
Slim Metal Case, IP30 Design
Dimensions
4.5x14.5 x10.8cm (1.77 x 5.70 x 4.25in)
Installation
DIN Rail or Panel Mounting
Environment Limits
Operating Temp
-40 to 85˚C
Storage Temp
-40 to 85˚C
Ambient Relative
Humidity
5 to 95%(Non-condensing)
UL Safety Temp
0 to 40˚C
Table 3. Specifications

16
Certifications
Safety
IEC/UL/EN60950-1
EMI
CE, FCC Part 15, EN55022: Class A
CE EN61000-6-4 (Industrial)
EMS
CE EN61000-4-2 (ESD)
CE EN61000-4-3 (RS)
CE EN61000-4-4 (EFT)
CE EN61000-4-5 (Surge)
CE EN61000-4-6 (CS)
CE EN61000-4-8
CE EN61000-4-11
CE EN61000-6-2 (Industrial)
Free Fall
IEC60068-2-32
Shock
IEC60068-2-27
Vibration
IEC60068-2-6
RoHS, REACH, WEEE
UL/CUL
Listed to Safety of Information Technology Equipment, including Electrical Business Equipment.
(Pending)
CE
The products described herein comply with the Council Directive on Electromagnetic Compatibility
(2004/108/EC) and the Council Directive on Electrical Equipment Designed for use within Certain
Voltage Limits (2006/95/EC). Will be certified for Information Technology Equipment including
Electrical Business Equipment (Pending).
UL 60950
*The product Ethernet network should be connected a Network Environment 0 which need to
comply the following conditions:
1). The function of the ITE being investigated to IEC 60950-1 is considered not likely to require
connection to an Ethernet network with outside plant routing, including campus environment.
2).The installation instructions clearly state that the ITE is to be connected only to PoE networks
without routing to the outside plant.
Table 4. Certifications

17
COMPLIANCE AND DISPOSAL
The products described here in comply with the Council Directive on Electromagnetic
Compatibility (2004/108/EC) and the Council Directive on Electrical Equipment
Designed for use within Certain Voltage Limits (2006/95/EC). Will be certified for
Information Technology Equipment including Electrical Business Equipment (Pending).
European Directive 2002/96/EC (WEEE) requires that any equipment that bears this symbol
on product or packaging must not be disposed of with unsorted municipal waste. This symbol
Indicates that the equipment should be disposed of separately from regular household waste. It is
The consumer's responsibility to dispose of this and all equipment so marked through designated
Collection facilities appointed by government or local authorities. Following these steps through
Proper disposal and recycling will help prevent potential negative consequences to the environment
And human health. For more detailed information about proper disposal, please contact local
authorities, waste disposal services, or the point of purchase for this equipment.

18
DIMENSIONAL DRAWING
Figure 9: Dimensional drawing

19
B+B SMARTWORX TECHNICAL SUPPORT
Phone: [phone]
(Monday - Friday, 7 a.m. to 5:30 p.m. CST)
Fax: [phone]
Email: [e-mail]
Web: www.imcnetworks.com