Unitek D1078A User manual

User Manual
USB-C Bidirectional Switch
Thank you for choosing Unitek USB-C Bi-Direction Switch. Please
read the user manual carefully before use and save them. If you
need any help, please contact our professional customer service
team at: [email protected]
① Key Switch
② lnput or Output: USB Type C Female(USB-C 1)
③ lnput or Output: USB Type C Female(USB-C 2)
④ lnput or Output: USB Type C Male(USB-C)
⑤ Power: USB-C Female(DC/5V)
Product Overview
1

1. USB-Type C bi-directional switcher, support two into one out,
one into two out bi-directional switching.
2. Support USB-C DP Alt Mode bidirectional switching , up to
8K60Hz resolution transmission.
3. Support USB PD 100W transmission, PD power output lossless
switching.
4.Support USB 10Gbps data transmission, two-way switching
devices (does not support Thunderbolt peripheral data
transmission, Thunderbolt for PCIe signals).
5. One key switching, convenient for users to choose between 2
in1out and 1 in 2 out for use.
2
Two In One Out
One In Two Out
Function
Two hosts share one display.
One host switch between two displays or USB-C 10Gbps data ports.
Two downstream ports cannot function simultaneously.

Why can't my TV or monitor reach 8K@60Hz resolution?
A: Please make sure that the host device supports DP1.4 alt mode
and the display device needs to support HDMI2.1 protocol in
order to output 8K@60Hz HD resolution.
Why can't my cell phone/computer or tablet device connect
to the product and output the video screen normally?
A: Please confirm the host device, you need to confirm whether
the device's Type C port supports video output, some electronic
devices' Type C port only supports data and charging function
(please refer to the product brand's official website for the
Q&A
3
Technical Data
6. A wide range of application scenarios, full-featured bidirectional
switching, more options for switching between USB Type hosts and
devices.
7. Status indication LEDs:
a. White LED indicator
b. When switching to the corresponding interface, the
corresponding LED lights up.

device's related parameters and specifications).
Why is the speed slow when reading and writing data?
A: This product has been rigorously tested, the normal read and
write state of the hard disk read and write speed can reach the
USB3.2 (10Gbps) standard transmission speed. If the read/write
speed is slow, please make sure that the USB port/storage
device/data cable connected to the host computer is up to the
10Gbps version. In addition some 10Gbps M.2 hard disk
enclosure, it is not recommended to use a long cable to connect
this product, because too long cable will affect the 10Gbps signal
transmission, it is recommended to use 20-30cm cable to
connect the M.2 hard disk enclosure.
Package Content
1 x USB-C Bi-Direction Switch
1 x USB A to C Cable 1m
2 x USB C to C Cable 1m
4

4
Warranty
The Unitek USB-C Bi-Direction Switch is covered by Unitek
warranty for 24 months. If the product fails due to manufacturer
defects, please contact us by email at:
[e-mail]