brandstand products cubieblue User manual

User Manual

Introduction
Thank you for purchasing the Brandstand CubieBlue. Please be sure to read this
User Manual carefully to ensure proper installation.
The information in this document is subject to change and does not represent a
commitment on the part of Brandstand Products. No part of this document may
be reproduced, transmitted in any form or by any means, electronic or
mechanical, including photocopying, recording, or information storage and
retrieval systems, or translated into any language for any purpose other than the
purchaser’s personal use, without the written permission of Brandstand
Products.
Product Features
•Combination Bluetooth Speaker, Power & Alarm
•Bluetooth Music Play Through
•User-friendly Alarm Clock with Single Day Alarm (Optional)
•Convenient Connections for AC and USB-Powered Devices
•Display Dimmer – 3 Levels and Off
•Auto- Update for Daylight Saving Time
•Surge Protection Through All AC Outlets and/or USB Ports
Product Description
•Bluetooth Speaker
•2 AC Outlets
•2 USB Charging Ports
•Single Day Alarm Clock
•Right Angle Pass-Through Plug
•Surge Protection
•6ft 15A Power Cord
•Security C-Clamp with 2 Wood Screws (included)

CubieBlue – Top View

Unpacking and Set Up:
1. Carefully remove from packaging. Verify that you have all necessary
components before you dispose of display carton.
Component List:
•CubieBlue Main Unit
•C-Clamp
•2 Wood Screws
2. Place in desired location.
Note: This product is designed to be used on a level, stable, flat surface
such as a table, desk, shelf or stand, convenient to an AC outlet, out of
direct sunlight and away from sources of excess heat, dust, moisture or
vibration.
3. Plug directly into wall AC outlet. Do not plug into another surge
protector or extension cord.
4. Secure cord with C-Clamp to back of nightstand or desk. Wood
screws are included.

Setting the Time:
1. Press and hold SNOOZE/DIMMER button for 6 seconds
2. Year will begin to flash, adjust by rotating
knob, press knob to select
3. Month will begin to flash, adjust by rotating
knob, press knob to select
4. Day will begin to flash, adjust by rotating
knob, press knob to select
5. Time will begin to flash, adjust by rotating
knob, press knob to select

Setting the Alarm
1. Press knob to turn ON alarm
2. Alarm time will begin to flash,
adjust by rotating knob, press
knob to select. (Alarm will
automatically set to last selected
alarm time after 6 seconds)
3. Press knob to turn OFF alarm
In Single Day Alarm On Mode: alarm
time will reset to 6:00am with every
activation of the alarm.
In Single Day Alarm Off Mode: the
alarm time will default back to the
last set alarm time with every activation.

Bluetooth Pairing
1. Open the Bluetooth setting on your device.
2. Press the CubieBlue Bluetooth button.
3. The Bluetooth button flashes and CubieBlue becomes discoverable.
4. Connect your device to CubieBlue and enjoy your music.
Volume Control
1. Rotate knob to adjust the volume.
- or -
2. Use the volume control on your device.

Secure Battery Door/Hidden Switches
Single Day Alarm (Preset to ON)
ON: Alarm time will reset to 6:00am with every activation of the alarm.
OFF: the alarm time will default back to the last set alarm time with every
activation.
Daylight Saving Time (Preset to ON)
ON: Time will automatically update +1 or -1 hour based on the pre-set Daylight
Saving Time Calendar. Year, Month and Day must be set correctly for this
feature to work properly
OFF: Time will not automatically update for Daylight Saving Time. Any changes
to the time must be manually updated.
Back Up Battery Function
Two "AAA" size batteries are supplied with the clock. If the AC supply is
interrupted, the internal clock will not be interrupted due to battery back up. The
back up battery will not support the Alarm Settings.

Other Features:
Snooze/Dimmer Button
When in standby mode, press SNOOZE/DIMMER button to change brightness
(off, dimmest, medium, brightest). When the display is turned off, user can also
press or rotate the knob to turn display on.
When alarm is sounding, press SNOOZE/DIMMER button to go to snooze
status, the alarm symbol will flash and the alarm will resound after 9 minutes.
Gradual Awake
Alarm will sound in a low volume and gradually increase to a higher volume.

Important Safeguards
•CAUTION – Do not install this device if
there is not at least 10 meters (30 feet)
or more of wire between the electrical
outlet and the electrical service panel.
•Ensure that the unit is plugged into an
AC120V~60Hz outlet. The use of
incorrect outlets could cause the unit to
malfunction or catch fire.
•To reduce the risk of fire or electrical
shock, do not use this device with a
receptacle in which the slot openings
do not align with the blades.
•Do not allow children to operate the
unit without adult supervision.
•Always ensure the product is
unplugged from the electrical outlet
before relocating or cleaning it.
•Keep the power cord and product
away from heated surfaces.
•The unit should not be exposed to
dripping or splashing and no objects
filled with liquids, such as vases,
should be placed on or around the
product.
•Do not place or drop product into water
or other liquids. If product falls into
water, immediately unplug it from the
electrical outlet; do not pull on power
cord.
•Do not put any stress on the power
cord where it connects to the product
as the power cord could fray and
break.
•Do not plug/unplug the product
into/from the electrical outlet with a wet
hand.
•Do not operate the product if it has a
damaged or cut power cord or adapter,
if wires are exposed, if it malfunctions,
if it is dropped or damaged, or if it is
dropped in or exposed to water.
•Place the unit where there is good air
circulation.
•This product has no user-serviceable
parts. Do not attempt to examine or
repair this product yourself. Only
qualified service personnel should
perform the servicing; take the product
to an electrical repair shop of your
choice for inspection and repair.
•No open flame sources, such as
candles, should be placed on the
product.
•Product should only be used indoors
and in dry locations. It should not be
used with aquariums or other water-
related products.
•Never allow any water or other liquids
to get inside the unit while cleaning.

Battery Handling and Usage:
WARNING: Only adults should handle batteries. Do not allow a child to use this
product unless the Battery Compartment Cover is securely attached to the
Battery Compartment in accordance with all product usage instructions.
•Follow the battery manufacturer’s safety and usage instructions.
•Keep batteries away from children and pets.
•Do not mix a new and a used battery or mix batteries of different
chemistries or sizes.
•Insert the batteries observing the proper polarity (+/-) as indicated inside
the battery compartment. Failure to properly align the battery polarity can
cause personal injury and/or property damage.
•Remove spent or discharged batteries when not using the product for an
extended period.
•Never throw batteries into a fire. Do not expose batteries to fire or other
heat sources.
•Dispose or recycle spent/discharged batteries in compliance with all
applicable laws. For detailed information, contact your local solid waste
authority.

Technical Specifications:
Continuous Duty Electrical Rating
125VAC 12A 60Hz 1500W
Maximum Energy Dissipation
600J L-N 300J L-G 300J N-G 300J
Maximum Spike Current
36000A L-N 12000A L-G 12000A N-G
12000A
UL Clamping Voltage (3-line)
UL1449 800V
AC Outlets Output
125V 12A
Powered USB Output
5V/2400mA shared
EMI/RFI Filtration
150kHz-1000MHz up to 40db
Surge Response Time (ns)
<20 ns
Working Temperature
No higher than 95º F
Power Cord
6ft 15W 3-line
Housing Material
UL94V-0
Working Surroundings
Indoor Fixed Mount

Limited 1-Year Warranty
Products are warranted by Brandstand Products against manufacturing defects
in materials and workmanship under normal use for 1-year (365) days from the
date of purchase. Defective products will be exchanged for the sample or a
comparable item.
Return Policy
For a refund or exchange, products must be returned within 30 days of original
purchase date. Customers must contact Brandstand Products to obtain a Return
Merchandise Authorization (RMA) number and specific shipping instructions prior
to returning the product. Any product returned without a RMA will be refused.
Product must be in original box with original accessories and packaging in
undamaged, clean and brand-new condition. Products that are incomplete,
damaged or have been used will require a deduction in refund. There is a 30%
restocking fee on all returned products. Refunds will be issued by check. Refund
checks are mailed the 10th day from the date the product is returned. Delivery
charges and customized products are non-returnable.

Disclaimer of Damages
In no event shall Brandstand Products, or its suppliers, be liable for indirect,
incidental, or consequential damages, loss of profit, loss of use or data, or
interruption of business, whether the alleged damages are labeled in tort,
contract, or indemnity, even if Brandstand Products or its suppliers has been
advised of the possibility of such damages. Some states do not allow the
exclusion or limitation of incidental or consequential damages, so the above
limitation may not apply.
Important: This product’s USB outlets cannot be used as a USB hub and does
not transmit data. The powered USB outlets on this unit are intended solely for
charging devices that can be charged via a USB interface.

Brandstand Products
3301 Matrix Drive #200
Richardson, TX 75082, USA
877-843-3681
www.brandstand.com
The Brandstand Difference
Surge Protection
All Brandstand Cubie products pass:
•UL1449 Surge Protection Devices Standard
•UL 962A for Furniture Power Distribution Units
Liquid Spill Testing
For enhanced safety, the Cubie Product Line was designed for and successfully
passed a UL spill test conducted by our ETL testing lab.
Pass-Through Power
The pass-through power plug allows another device (i.e. lamp or alarm clock) to
be plugged into the same wall outlet used by the Cubie Product.
© 2015 TXS Industrial Design Inc. d.b.a. Brandstand Products
Brandstand is a registered trademark of TXS Industrial Design, Inc. in the United States.