Brasq PS100 User manual

Instruction Manual
Model: BRASQ PS100
®

- 2 -
Paper Shredder
Dear customer,
Thank you for purchasing this quality product. Please carefully read the operating
instructions prior to the initial operation and keep them handy for future reference.
Please pay particular attention to the following safety information. If you have any
questions or complaints about the device, please refer to the service information at the
end of these instructions.
Setup:
1. Place the paper shredding plastic bin provided with your shredder, inside the appropriate rib
position attached to the inside of waste bin.
2. Place the shredder securely on top of the waste basket. Be sure not to allow your fingers to
get between the basket and the shredder as you are placing the shredder in place.
3. Plug the power cord into any standard 220-240 volt AC out let.
Operating the shredder:
The Main Switch is located on the top of the shredder. The Main Switch has 3 settings.
1. When AUTO is selected, the shredding process is started automatically by inserting the
paper, The shredder will stop automatically when the paper has completed its travel
through the feed opening.
2. REV is used to assist in the removal of a paper jam, which reverses the shredder process
prior to a completed cycle, thus clearing the cutters.
3. OFF is used to terminated the AC power to the shredder. The mode is recommended when
emptying the wastebasket or when the shredder is not in use for a prolonged period of time.

- 3 -
Shredder capacity:
PS100 will shred 6sheets of A4 size 80g/gsm paper, and will accept paper widths up to
220mm. When shredding small material like envelopes or receipts, insert them through the
middle of the feed opening.
Cautions:
1. Keep all loose articles of clothing, ties , jewelry , hair or other small items
away from the feed opening to prevent injury.
2. Keep in the OFF position when the shredder is not in use for prolonged periods of time.
3. Remove all paper clips and staples from paper before shredding.
4. Do not place hands or fingers into the shredder throat as it can result in serious injury.
5. Always turn off or unplug the shredder prior to moving, cleaning or emptying the
wastebasket.
6. Empty wastebasket frequently.
7. The document shredder must always be deactivated and disconnected from the electrical
line prior to moving, transporting and cleaning the device and prior to emptying the waste
basket.
8. Please do not leave the document shredder unattended e.g. in the event children or
pets are nearby.
9. The device may not be operated with a damaged power cord.
10. For indoor use only.
11. To protect the machine well, we suggest the user to operate it in this way: work 2 minutes
then rest one hour.
12. Please do not spray any flammable gas or oil onto this shredder, it may cause fire.
13. Please read the manual before operating the machine .

- 4 -
14. This equipment is not intended for use by children, avoid touching the media feed
opening with the hands, clothing or hair,unplug this equipment when not in use for an
extended period of time, hazardous moving part is in this equipment, keep body parts away
from moving parts .
Specifications:
Shred type: Strip-cut
Input: 220-240 VAC, 50Hz, 0.7A
Size of cut: 6 mm (paper)
Feed Opening: 220mm for paper
Shredding Capacity: 6 sheets DIN A4 (80g)
Shredding speed: 2.5m/min
Basket capacity: 7 L capacity
Dimensions: approx. 315 x 115 x 210 mm
Security level (DIN 66399-2): P-2
Guideline 2012/19/EU concerning the handling, collection, recycling and disposal of
electrical and electronic equipment and their components (‘waste electrical and
electronic equipment’, known as WEEE). The crossed symbol on a rubbish container
indicates that the machine or device is not allowed to be disposed of but it must be
handed over to a suitably equipped collection center for proper recycling or disposal.
This machine corresponds to the requirements according to EU Guideline
2014/30/EU ’Electro-Magnetic Compatibility’ 2014/35/EU entitled ‘Low-Voltage
Guidelines’