WilTec 61075 User manual

Operation Manual
Electric Garden Shredder
61075
Illustration similar, may vary depending on model
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps and technical data can differ insignificantly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities, please contact us.

© by WilTec Wildanger Technik GmbH Item 61075 Page 2
http://www.WilTec.de
http://www.aoyue.eu 10 2021-1
http://www.teichtip.de
The information contained in this document may alter at any time without previous notice. It is prohibited
to copy or spread any parts of this document in any way without prior written allowance. All rights re-
served.
The WilTec Wildanger Technik GmbH cannot be held accountable for any possible mistakes in this
operating manual, nor in the diagrams and figures shown.
Even though, the WilTec Wildanger Technik GmbH has undergone biggest possible efforts to ensure
that the operating manual is complete, faultless and up to date, mistakes cannot be entirely avoided.
If you should find a mistake or wish to make a suggestion for improvement, we look forward to hearing
from you.
Send an e-mail to:
[email protected]
or use our contact form:
https://www.wiltec.de/contacts/
The most recent version of this manual in various languages can be found in our online shop via:
https://www.wiltec.de/docsearch
Our postal address is:
WilTec Wildanger Technik GmbH
Königsbenden 12
52249 Eschweiler
Germany
Do you wish to pick goods up? Our pick-up address is:
WilTec Wildanger Technik GmbH
Königsbenden 28
52249 Eschweiler
Germany
To shorten the waiting time and allow for a rapid on-site transaction, we ask you to call us previously or
placing your order via the webshop.
E-mail: [e-mail]
Tel:[phone]
Fax: [phone]
To return orders for exchange, repair or for other purposes, please use the following address. Attention!
To allow for a smooth execution of your complaint or return, it is important to contact our customer
service team before returning the goods.
Returns Department
WilTec Wildanger Technik GmbH
Königsbenden 28
52249 Eschweiler
E-mail: [email protected]o
Tel:[phone]
Fax: [phone]

© by WilTec Wildanger Technik GmbH Item 61075 Page 3
http://www.WilTec.de
http://www.aoyue.eu 10 2021-1
http://www.teichtip.de
Introduction
Thank you for purchasing this quality product. To minimize the risk of injury we urge that our clients
take some basic safety precautions when using this device. Please read the operation instruc-
tions carefully and make sure you have understood its content.
Keep these operation instructions safe.
First information
•ATTENTION! Observe the safety and assembly instructions in order to avoid the risk of
injuries or damages to the product. Only suitable for domestic, not for commercial use!
•Important: Read this manual completely and thoroughly. Keep this manual for future reference.
Should you pass on the product one day, make sure to pass on these instructions as well.
•Keep small parts out of children’s reach. Keep plastic bags and other packaging material away
from children, especially when unpacking! Risk of suffocation!
•Check the scope of delivery for completeness. Later complaints cannot be accepted. Check all
elements and parts for damage. Despite careful checks, transport damages may occur. Do not
assemble your product in such a case. Defective parts can cause dangers and risks to your
health.
•Never modify the product! Modifications invalidate the warranty, and the product may become
unsafe or even dangerous.
•Use a sponge and warm soapy water for cleaning. Do not use solvent-based cleaners or deter-
gents, e.g., bleaching agents, as these can damage the product.
Intended use
This shredder is designed for shredding fibrous and wooden garden waste in a manner suitable for
composting.
WARNING! For your own safety, read this manual and the general safety instructions thor-
oughly before operating the device. If leaving the device to a third party, always pass on these
operating instructions with the device!
Unpacking
Remove the packaging material. Also remove the packaging and transport materials (if present). Check
if the scope of delivery is complete. Check the device and the accessories for transport damage. If
possible, keep the packaging until the warranty expires. Then dispose of them in an environmentally
friendly manner.
WARNING! Packaging material is not a toy! Children must not play with plastic bags! There
is a danger of suffocation!
Contents: Machine, 2×wheels, 2×wheel covers, collecting tank, wheel axle, 2×spacer sleeves, washers,
2×nuts, open-end wrench, flat pushrod
If parts are missing or damaged, contact your dealer!

© by WilTec Wildanger Technik GmbH Item 61075 Page 4
http://www.WilTec.de
http://www.aoyue.eu 10 2021-1
http://www.teichtip.de
Explanation of symbols
Warnings/Danger!
Turn off the machine and unplug the power cord before making any adjustments, cleaning
the machine, or if the cable is tangled or damaged.
Keep third parties away
Thoroughly read the operating instructions before using the machine. Follow the instruc-
tions and safety guidelines when using the machine.
Wear ear protection. Wear protective goggles.
Danger –Rotating knives. Keep your hands and feet outside the openings while the ma-
chine is running.
Always wait until all parts stand still before touching them!
Do not walk or stand on the machine.
Wear protective gloves.
Protection class II –double insulation
Guaranteed sound power level.
Safety instructions
General safety instructions for power tools
Carefully read all instructions and warnings. Failure to follow the instructions and warnings may result
in electric shock, fire, and/or serious injury. Keep the instructions and warnings in a safe place. The term
“device” refers to electrically operated devices, either in mains operation (with cable) or with battery
operation.
Safety at the workplace
•Always keep the working area clean, tidy, and well-lit. Untidy and dark areas lead to an in-
creased risk of accidents.
•The unit must not be operated in explosive areas, e.g., in the presence of flammable liquids,
gases, or dust. The device can generate sparks causing dust or vapours to explode.
•When working with the device, other persons, especially children, must always observe a safety
distance. If you are distracted by others, you may lose control of the device.

© by WilTec Wildanger Technik GmbH Item 61075 Page 5
http://www.WilTec.de
http://www.aoyue.eu 10 2021-1
http://www.teichtip.de
Electrical safety
•The mains voltage must always correspond to the information on the type plate of the device.
•The mains plug of the device must fit into the socket. The plug must not be changed in any way.
Do not use adapter plugs together with earthed electrical appliances. Unchanged plugs and
suitable sockets reduce the risk of electric shock.
•Avoid any physical contact with earthed surfaces such as pipes, heaters, stoves, and refrigera-
tors. There is an increased risk of electric shock if your body is earthed.
•Keep the device away from rain or moisture. Penetration of water into the device will increase
the risk of electric shock.
•Do not use the cable to carry, hang the device or to disconnect it from the socket. Always keep
the cable away from heat, oil, sharp edges, or moving parts. Damaged or tangled cables in-
crease the risk of electric shock.
•When working outdoors, only use extension cords suitable for outdoor use. Using an extension
cord suitable for outdoor use will reduce the risk of electric shock.
•If operation of the device in a humid environment is unavoidable, always use an earth leakage
circuit breaker. The use of a circuit breaker reduces the risk of electric shock.
Personal safety
•Be attentive and fully concentrate on what you are doing. Always use an electrical device with
caution. Do not use it if you are tired or under the influence of drugs, alcohol, or medicine. A
moment of carelessness during use may result in serious injury.
•Wear personal protective equipment and always wear safety glasses. Wearing personal protec-
tive equipment such as a dust mask, non-slip safety shoes, safety helmet, or ear protection
reduces the risk of injury, depending on the type of use of the equipment.
•Avoid unintentional start-up. Make sure that the device is turned off before connecting it to the
power supply and/or battery, picking it up, or carrying it. With your finger being on the switch
when carrying the device or connecting it to the power supply when switched on, this can easily
lead to accidents.
•Remove all adjustment tools and wrenches before turning on the device. A tool or key remaining
in a rotating part of the device may cause injury.
•Avoid any unnatural posture. Ensure a safe stand and maintain your balance at all times. This
will allow you to better control the device in unexpected situations.
•Always wear suitable work clothing. Do not wear loose clothing or jewellery. Keep hair, clothing,
and gloves away from moving parts. Loose clothing, jewellery, or long hair can easily be caught
by the moving parts. If dust collecting or absorbing devices can be installed, make sure that
they are connected and used properly. The use of such a device can reduce the risk of dust.
Power tool use and handling
•Do not overload the device. Only use a suitable device for your work. With the appropriate
device, you will work better and safer in the specified power range.
•Do not use a device the switch of which is defective. A device that can no longer be switched
on or off is dangerous and must be repaired.
•Disconnect the power plug from the socket and/or remove the battery before making any device
adjustments, changing any accessories, or putting the device away. This precaution prevents
the device from accidentally starting.
•Always keep unused equipment out of the reach of children. Do not allow persons not familiar
with this equipment or not having read these instructions to use it. Electrically operated equip-
ment is dangerous if used by inexperienced persons.
•Regularly maintain the unit and take good care of it. Check if the moving parts are functioning
properly and are not jammed, if parts are broken or damaged in such a way as to affect the
operation of the device. Have all damaged components repaired before using the device. Many
accidents are caused by poorly maintained devices.
•Keep the cutting tools (inserts) sharp and clean. Carefully maintained cutting tools with sharp
cutting edges jam less and are easier to guide.

© by WilTec Wildanger Technik GmbH Item 61075 Page 6
http://www.WilTec.de
http://www.aoyue.eu 10 2021-1
http://www.teichtip.de
•Use the device, accessories, inserts, etc. according to these instructions. Take into account the
working conditions and the activity to be performed. The use of electrically powered equipment
for applications other than those for which it is intended can lead to dangerous situations.
Service
Have your device repaired only by a qualified specialist company with original spare parts. This ensures
that the safety of the device remains guaranteed.
Special safety instructions for the garden shredder
•Protective gloves, goggles, and ear protection must always be worn. Do not wear loose clothing!
•Always stand safely and in balance. Do not stretch towards the machine.
•During operation, the machine must stand on a straight and stable surface. Make sure that all
bolts and nuts have been tightened before use.
•The machine may only be used in dry conditions, never in rainy weather outdoors.
•Never use the machine with damaged guards or without them.
•Hands, other parts of the body, and clothing must be kept as far away from the hopper and the
unloading chute as possible. Never place your face or the rest of your body near the hopper.
•Do not leave the machine unattended. However, if you need to leave the machine, absolutely
switch off the motor and disconnect the power plug.
•No hard objects such as stones, bottles, cans, or pieces of metal may be brought into the inlet
shaft. This can damage the machine.
•If the machine is blocked, switch off the motor and disconnect the machine from the power
supply, remove all objects, and check the machine for damage.
•If the fuse burns or the overload protection trips, this is a sign of the machine having been
overloaded and/or of too many devices having been connected to the same extension cable.
Find and remedy the cause. Do not install a stronger fuse to remedy the problem.
•Do not touch dangerous moving parts before the machine has been disconnected from the
mains and the moving parts have come to a complete standstill.
•Note that no damaged cable may be connected to the power supply. Do not touch a damaged
cable until it has been disconnected from the power supply, as this may result in an electric
shock. Keep the extension cord away from moving and dangerous parts to prevent damage to
the cord.
•Do not operate the machine in bad weather conditions, especially when there is a risk of light-
ning!
•Do not pull the extension cord. Do not pull the cable tightly. This may damage the plugs or cable
insulation. Although such damage is not visible, it can still be dangerous!
•The extension cord must always be kept away from the machine. Remove the plug from the
socket to check it regularly for damage and signs of wear. Do not use the machine with a dam-
aged extension cord!
•If a replacement of the connecting cable is required, this must be carried out by an electrically
qualified person in order to avoid safety hazards.
•Do not move the machine by pulling the cable. Do not move the machine while the engine is
running. Before first use, the chopper must be properly assembled.
•Only use extension cords approved for outdoor use. Before using the machine, make sure that
all cables are in perfect condition. Always switch off the shredder before removing a cable from
the socket.
•Keep children and animals away from the shredder. All other persons must stay at a safe dis-
tance from the shredder when it is in operation. Persons who have not read these instructions
or are not familiar with the shredder must not use this machine.
•It should be noted that the user himself is responsible for accidents or hazards to other persons
or their property.
•The shredder may only be used for its intended purpose.
•WARNING: This machine has rotating blades! The cutting knives will not stop im-
mediately after the machine has been switched off.

© by WilTec Wildanger Technik GmbH Item 61075 Page 7
http://www.WilTec.de
http://www.aoyue.eu 10 2021-1
http://www.teichtip.de
•Switch off the shredder, remove the plug from the socket, and wait until the cutter blade has
come to a complete stop before carrying out any maintenance or cleaning work.
•It is forbidden to remove or modify electrical or mechanical safety devices.
•Use the shredder only in daylight or good artificial light.
•If noticing any unusual vibrations in the shredder, immediately switch off the engine and check
the cause of the problem. Vibrations are generally a sign of malfunction.
•The chopper must be carefully inspected before use! Check that the cutter blade is firmly seated
before using the shredder. The device may only be operated with the cutter blade properly in-
serted. Only work with devices in a proper condition. If you discover any damage or fault on the
device which could be a danger to the user, the device may only be used again after it has been
repaired.
•For safety reasons, worn or damaged parts must be replaced immediately. Only use original
spare parts. The use of non-original spare parts can lead to malfunctions and injuries and voids
the warranty!
•Only use the shredder in places where it is protected from water. The machine must not be
exposed to rain!
•Always keep the shredder in a dry and safe place out of the reach of children. This device must
not be used by children! Children should also be supervised so that they cannot play with the
device. Likewise, maintenance and cleaning must not be carried out by children.
•This device must not be used by persons with reduced physical, sensory, or mental abilities or
lack of experience and knowledge. Local regulations may limit the user’s age.
•Familiarise yourself with the adjustable parts and proper use of the machine.
Preparation
•Do not allow children to work with this device.
•Always wear ear protection and safety glasses during operation.
•Avoid clothing with a loose fit or hanging straps or bands.
•Only use the machine with enough free space around it (e.g., not near a wall or other solid
objects) and on firm, level surface. Do not operate the machine on paved ground or gravel where
ejected parts can cause injury.
•Before switching on the machine, all screws, nuts, bolts, or other fixing agents must be checked
for secure seating, as must be the presence of protective and shielding devices. Replace dam-
aged and illegible stickers.
•Always wear sturdy shoes and long trousers when operating the machine. Do not operate the
machine barefoot or in light sandals. Avoid wearing loose clothing or clothing with hanging cords
or ties.
•Replace worn and damaged parts in sets to avoid unbalance.
Operation
•Before switching on the machine, look into the filling chamber to ensure that it is empty.
•Do not insert hands or other parts of the body into the hopper or ejection chute.
•Always ensure a safe stand and good balance. When filling the machine, never stand on a
higher level than the surface on which the machine stands. When operating the machine, always
keep far enough away from the ejector.
•When filling the machine, always ensure that no pieces of metal, stones, surfaces, cans, or
other foreign objects are inserted. If the cutting mechanism touches a foreign object or if the
machine makes unusual noises or vibrations, immediately switch off the power and let the ma-
chine run out completely or come to a standstill. Disconnect the machine from the power supply
and carry out the following measures in the specified order:
1. Check the machine for possible damage.
2. Make sure that all loose parts have been tightened and that all components are securely
fastened.
3. Each damaged component must be replaced with original spare parts with identical speci-
fications.
•Do not allow the processed material to accumulate in the ejection area, as this may interfere
with correct ejection or cause the material to recoil through the feed opening. If the machine

© by WilTec Wildanger Technik GmbH Item 61075 Page 8
http://www.WilTec.de
http://www.aoyue.eu 10 2021-1
http://www.teichtip.de
starts to clog, IMMEDIATELY disconnect it from the power supply. Before removing the block-
age, the shredder MUST be disconnected from the power supply.
•Keep the power unit free of waste and other debris to prevent damage or possible fire. Always
remember that the cutting tools continue to move for a while even after the machine has been
switched off. Always wait until the machine has come to a complete standstill.
•Do not change in any way the motor controller settings! The controller controls the safe maxi-
mum operating speed and protects the engine and all moving parts from damage caused by
excessive speed. Always switch off the shredder as soon as you leave the working area. Always
consult a specialist operator or customer service if you have a problem.
•Never tip the machine when the engine is switched on. Never operate it with defective guards
or without safety devices such as the attached collecting tank. If the cables are damaged, stop
operation!
•Warning! The maximum permissible mains impedance Zmax (total alternate current
resistance) of the device is 0.333 Ohm. As the user of this device, you must consult the
power supply company in case of doubt. The device may only be connected to a power
supply whose impedance is less than or equal to Zmax!
Maintenance and storage
•If the machine is switched off for maintenance, inspection, storage, or replacement of an acces-
sory (power unit MUST be disconnected in such cases), make sure that all moving parts are
stationary and any keys have been removed. Allow the machine to cool down before any in-
spection, adjustment, storage, etc.
•Maintain the machine with care and keep it clean at all times. When maintaining the chaff unit,
be aware that, although the energy source is switched off due to the interlocking function of the
protective device, the chaff unit can still be moved. NEVER try to bypass the interlocking func-
tion of the guard!
•When servicing the cutting tools, make sure that (even if the power source cannot be switched
on due to the safety lock) the cutting tools can still be switched on by a manual start mechanism.
Additional safety instruction for devices with collecting containers
The chopper must always be switched off before attaching or removing the collecting container!
Residual risk
•Even when used as intended, residual risks may still exist despite compliance with all relevant
safety regulations due to the design determined by the intended use.
•Residual risks can be minimised if the safety instructions and the intended use as well as the
operating instructions as a whole are observed. Consideration and caution reduce the risk of
injury or damage to property:
◦risk of injury to fingers and hands if you reach with your hand through an opening and reach
the knife mechanism;
◦risk of injury to fingers and hands during assembly and cleaning work on the knife mecha-
nism;
◦injury due to chaff being thrown away in the area of the funnel;
◦danger from electricity if incorrect electrical connection cables are used;
◦contact with live parts when electrical components are open.
•In addition, prolonged work without hearing protection may result in hearing loss or damage.
Despite all precautions taken, there may be non-obvious residual risks.
Extension cable
Only use extension cables approved for outdoor use (H05VV-F). The cable cross section must be equal
to or greater than 1.5 mm² for a length of up to 75 m. Extension cables longer than 30 m generally
reduce the performance of the machine.

© by WilTec Wildanger Technik GmbH Item 61075 Page 9
http://www.WilTec.de
http://www.aoyue.eu 10 2021-1
http://www.teichtip.de
Structure
Components
№
Name
№
Name
1
Hopper
6
Wheels
2
Main body
7
Foot
3
Rear body
8
On/off switch
4
Collecting container
9
Reset switch (motor protection)
5
Rack
10
Hand screw
Assembling the garden shredder
№
Name
№
Name
1
Wheel
4
Locking nut
2
Spacer tube
5
Hubcap
3
Washer
1. Turn the shredder upside down and fold the legs upwards.
2. Then guide the supplied wheel axle through the openings provided.
3. Slide the two washers right and left over the wheel axle.
4. Also place the spacer sleeves supplied on the wheel axles. Finally, fit the wheels and the lock
nut with the hub cap.
Warning: Take care when tilting the appliance on the wheels, as its weight distribution is
unbalanced during tilting and moving transport!

© by WilTec Wildanger Technik GmbH Item 61075 Page 10
http://www.WilTec.de
http://www.aoyue.eu 10 2021-1
http://www.teichtip.de
Collecting container
•Pull the safety handle at the upper end of the base frame and slide the collection container
under the base frame.
•The collection container locks automatically when you release the safety handle.
•To remove the container again, press the safety handle up and pull the container out of the base
frame.
Operation
On/off Switch
The machine can be started and stopped by pressing the on/off switch.
NOTE: The unit is equipped with a safety switch to prevent accidental restart after a power
failure.
Overload protection
•Overload (e.g., due to blocking of the cutting blades) causes the machine to stop after a few
seconds. To prevent damage to the motor, the overload switch automatically switches off the
mains connection.
•Wait at least 1 min before restarting the machine by pressing the reset button. If the motor still
does not start, do the following:
1. Disconnect the plug from the socket.
2. Loosen the screw plug and then open the upper part upwards.
3. Carefully clean the cutting and exhaust elements and remove any objects that may obstruct
cutting.
4. Replace the top and tighten the hand screw firmly.
5. Press the reset button again before pressing the on/off switch.

© by WilTec Wildanger Technik GmbH Item 61075 Page 11
http://www.WilTec.de
http://www.aoyue.eu 10 2021-1
http://www.teichtip.de
WARNING NOTES:
•Always wear protective gloves while performing the above steps!
•Never loosen the hand screw until you have switched off the machine via the on/off
switch and the plug has been removed from the socket!
Disassembly
Under certain circumstances, e.g., for storage after use, the machine can be disassembled by carrying
out the assembly steps in reverse order to the sequence described above.
Use
•Place the material to be shredded into the filling opening on the right side. The branches are
then automatically fed into the machine by the counter-clockwise rotating cutter blade. Do not
put too much material into the opening at once to prevent the machine from blocking.
•If garden waste that has already become slightly damp and rotten is to be disposed of, swap
between garden waste and branch plant during filling to avoid blocking the cutting blade. Com-
post soft kitchen waste, but DO NOT put it into the shredder.
•Branches with leaves must have passed completely through the shredder before new material
can be added. Make sure that the shredded material can fall freely into the collecting basket
without blocking the outlet. The ventilation slots must not be blocked by the chopped (cov-
ered/clogged/soiled) material.
•Longer chipping of thick wood or strong branches can cause the machine to stop due to clogging
or jamming. Soft material such as leaves or small twigs can easily clog the feeder. Use a stick
to push in this material.
•Waste material must always be inspected for nails, stones, and other solids beforehand, as
such objects can seriously damage the shredder.
•Beware of vibrations, as these are usually a typical sign of worn or damaged cutting blades.
Always replace the cutting blades if necessary.
Care and maintenance
WARNINGS!
•Make sure that the garden shredder is switched off and disconnected from the mains
before carrying out any cleaning or maintenance work on the machine. Always wear
sturdy protective gloves when cleaning the cutting blades!
•Risk of injury from moving and dangerous parts!
•To maintain the efficiency of the shredder, it must be kept clean. Clean the shredder after each
use!
•Do not allow shredded material to dry or harden on the surfaces of the shredder. This has an
immediate negative effect on the shredding performance.
•Always ensure a clean filling and ejection chute free of waste material.
•Always make sure that all nuts, bolts, and screws are tight!
•Always have defective and worn parts repaired or replaced by a qualified person.
•Do not use cleaning agents or solvents, as they may cause irreparable damage to your machine.
Chemicals can destroy plastic parts.
•After every fourth or fifth use, the knives must be oiled!

© by WilTec Wildanger Technik GmbH Item 61075 Page 12
http://www.WilTec.de
http://www.aoyue.eu 10 2021-1
http://www.teichtip.de
Spare parts order
When procuring spare parts, the following information should be provided:
•device type,
•device item number,
•device identification number,
•cutting tools (knives): GY1.
Changing blades
If the knives are to be replaced, this must always be done in pairs. To do this, open the shredder and
block the knife disc with a screwdriver. Loosen the screws using the Allen wrench supplied. Mount the
new knives in the reverse order.
Only have the shredder inspected and serviced by qualified service technicians. Do not attempt
to repair the shredder yourself.
WARNINGS:
•Never use a high-pressure cleaner or running water to clean the shredder!
•Brush off dirt and plant residues. Wipe the outside with a cloth moistened with a mild
detergent or water if necessary.
Storage
•To protect the shredder from corrosion during storage during extended periods of storage, treat
the cutter blade with environmentally friendly oil.
•Make sure that the garden shredder has thoroughly been cleaned before storing it in a clean
and dry place and out of the reach of children.
Repairs
Attention! Electrical repair work may only be carried out by an electrician or the customer
service workshop!

© by WilTec Wildanger Technik GmbH Item 61075 Page 13
http://www.WilTec.de
http://www.aoyue.eu 10 2021-1
http://www.teichtip.de
Technical specifications
Nominal voltage (V)
230–240
Nominal frequency (㎐)
50
Nominal power P40 (W)
2500
Idling speed (r⁄min)
4050
Max. diameter of branches (㎜)
40
Capacity of collecting container (ℓ)
50
Sound pressure level (dB (A))
95.7 (K=3)
Sound power level (dB (A))
guaranteed
111
measured
108.3 (K=2,64)
Weight (㎏)
14
Operating time P40 (s)
Full load: 40; idling: 60
Protection class
II
Protection type
I PX4
Troubleshooting
Problem
Cause
Solution
The engine is not run-
ning.
Safety interlock
Tighten screw plug well.
Power outage
Check power cord, plug, and fuse in your home.
The material is not
drawn in.
Material accumulates in-
side hopper
Switch off chopper, pull material out of hopper (first
disconnect it from mains!), connect power and
switch on shredder again and insert thick branches
so that knives do not interfere with previous inci-
sions again.
Shredder material too soft
Insert wood and dried branches.
Cutting blade blocked
Unscrew hand screw, open shredder, and remove
material which does not block unit (disconnect unit
from power supply!).
Material is not cut.
Motor protection triggered
Remove all chaff pieces and press reset switch.
Materials jamming
Remove all chaff pieces from knives.
Engine does not start.
Check that power cord, connector, fuse and latch
are in proper condition.
Filling device clogged
Pull branches out of filling suction opening; alterna-
tively, use a rod to push or loosen branches inside
machine.
Warning! In the event of an accident or any type of malfunction, first stop the appliance and
disconnect it from the mains. Always make sure that the moving parts are completely stationary.
Only then check the unit or call the customer service.

© by WilTec Wildanger Technik GmbH Item 61075 Page 14
http://www.WilTec.de
http://www.aoyue.eu 10 2021-1
http://www.teichtip.de
Disposal regulations
EU guidelines regarding the disposal of scrap electric appliances (WEEE, 2012/19/EU) were imple-
mented in the law related to electrical and electronic equipment and appliances.
All WilTec electric devices that fall under the WEEE regulations are labelled with the crossed-out
wheeled waste bin logo. This logo indicates that this electric equipment must not be disposed with the
domestic waste.
The company WilTec Technik GmbH has been registered in the German registry EAR under the WEEE-
registration number DE45283704.
Disposal of used electrical and electronic appliances
(intended for use in the countries of the European Un-
ion and other European countries with a separate col-
lection system for these appliances).
The logo on the article or on its packaging points out
that this article must not be treated as normal house-
hold waste but must be disposed to a recycling collec-
tion point for electronic and electrical waste equipment.
By contributing to the correct disposal of this article you
protect the environment and the health of your fellow
men. Environment and health are threatened by inap-
propriate disposal.
Material recycling helps reduce the consumption of raw materials.
Additional information on recycling this article can be provided by your local community, municipal waste
disposal facilities or the store where you purchased the article.
Address:
WilTec Wildanger Technik GmbH
Königsbenden 12 / 28
D-52249 Eschweiler
Important notice:
The reprint or reproduction, even of excerpts, and any commercial use, even in part, of this instruction
manual require the written permission of WilTec Wildanger Technik GmbH.