Brasq PS406 User manual

:
Read the operang manual carefully before starng up the shredder! - Ensure that the
voltage and frequency of the power supply correspond to the data on the rang plate!
Incorrect voltage may result in destrucon of the unit! - The socket must be easily accessible
- Do not open the housing lid! This can cause serious injury like electric shock! The inner
parts cannot be maintained. - Repairs are to be eected by qualied aer-sales service sta
only, or else the warranty of this machine is no longer valid. The safety devices must not be
removed or manipulated.
:
1. Put the plug in a power socket
2. This shredder has a built-in safety mechanism that requires the waste bin to be correctly
inserted into the shredder. Lining the waste bin with a plasc bag will interfere with this
safety precauon and may keep the shredder from funconing.
:
Remove all staples and paper clips! This will extend the shredders life. Max. capacity = 6
sheets at the same me (80 g/m2)!
1. Set the switch to „AUTO“. Put the plug in a power socket. 2. The shredder switches on
automacally when a sheet of paper is fed into feed aperture. It stops once the sheet has
passed through. 3. Do not set the switch to REVERSE (REV) when shredding a Credit Card,
otherwise the shredder may be damaged. The shredder cannot shred paper and a Credit
Card at the same me and can only shred one Credit Card at once. 4. When shredding small
material like Credit Cards or receipts, insert them in the middle of the paper feed opening.

:
1. a. If the shredder fails because of a paper jam, set the switch to REVERSE (REV). 2. Remove
the rejected paper and feed less sheets into the shredder. Never pull paper out of the
shredder, this will damage the cuers. 3. Should it occur that the shredder does not react to
anything then it is very likely that the motor is overheated. Try the previous steps again aer
30 to 40 minutes.
CAUTION!
1. a. This shredder is designed for short operaon. If it runs for too long or overheats, the
shredder switches of f automacally and must be cooling down for several minutes before it
is ready to resume operaon. 2 minutes on, 20 to 30 minutes o . b. Do not exceed the
maximum cung capacity! 2. Keep hands and ngers away from the feed opening. Serious
injury may result. Be careful with long hair and with neck-es, bracelets, and other jewelry.
3. Do not expose the shredder to rain or humidity 4. Do not operate the machine
unsupervised. 5. Always turn o the shredder by unplugging the machine before moving or
cleaning. Cleaning only with a damp cloth! 6. Do not use in the vicinity of inammable liquids
or gasses. Do not use in the vicinity of corrosive materials. 7. Empty the bin and oil the
shredder frequently for smooth, trouble free operaon. 8. Never allow the shredder to
remain in a jammed condion with the power turned on. 9. Do not alter the plug!
NOTE:
The shredder is only suitable for shredding paper and Credit Cards (not other materials like
labels, cardboard or plascs)! Never shred envelopes, labels or anything with glue or any
scky substance as this will lead to paper jams. Do not open the housing lid! This can cause
serious injury like electric shock! Warranty on the machine will become invalid once a non
quali ed person intervenes with the machine.
:

: