Braun CareStyle 7 Pro User manual

Stapled booklet, 148 x 210 mm, 24 pages (incl. 8 pages cover), Cover 2c = PMS 485 C + black
CareStyle7 IS7285 Ti CN KURTZ DESIGN 12.07.22
www.braunhousehold.com/register
Register your product
Type 12870022
Car
eStyle 7 Pro
CareStyle 7
5712870073_IS72xx_INT.indd 15712870073_IS72xx_INT.indd 1 15.07.22 11:1315.07.22 11:13

2
© Copyright 2021. All rights reserved
De’Longhi Braun Household GmbH
Carl-Ulrich-Straße 4
63263 Neu-Isenburg/Germany
5712870073_IS72xx_INT.indd 25712870073_IS72xx_INT.indd 2 15.07.22 11:1315.07.22 11:13

3
CareStyle 7 Pro
A
2.0 L
max
min
SteamStation CareStyle Pro 7285 CN KURTZ DESIGN 25.05.22
5
5a
5b
6
7
8
9
10
12
12
11
13
11
11
1234
min
•
min
min
chemicals
5712870073_IS72xx_INT.indd 35712870073_IS72xx_INT.indd 3 15.07.22 11:1315.07.22 11:13

4
C
B
D
SteamStation CareStyle 7 IS7285 CN INT KURTZ DESIGN 12.07.22
flashing
~10´-15´
permanent
flashing
+
iCare
ProSteam
Eco Boost
Turbo
1x
• ••
30 /sec
15 /min
+
iron ready
min
min
off
CareStyle 7 Pro
on
5712870073_IS72xx_INT.indd 45712870073_IS72xx_INT.indd 4 15.07.22 11:1315.07.22 11:13

5
E
SteamStation CareStyle 7 Pro IS7285 CN KURTZ DESIGN 12.07.22
flashing
10
10 min
Auto-Off
Stand-by Off
2x
+
F
permanent
!
allow to
cool down
min. 2.5 h
+3x
+10 min
10
°C
°C
°C
2.0 L
max
min
2 sec
2
2x
2.5
5712870073_IS72xx_INT.indd 55712870073_IS72xx_INT.indd 5 15.07.22 11:1315.07.22 11:13

6
G
SteamStation CareStyle 7 Pro IS7285 CN KURTZ DESIGN 12.07.22
2.0 L
max
chemicals
abrasive
Care & Cleaning
Lock System
!
°C
2.0 L
max
2.0 L
max
Storage
5712870073_IS72xx_INT.indd 65712870073_IS72xx_INT.indd 6 15.07.22 11:1315.07.22 11:13

7
Before use
Please read the user instructions carefully
and completely before using the appliance
and retain for future reference. Remove all
packaging and labels and dispose them ap-
propriately.
Caution
z Caution:Hotsurfaces! Electric
ironing stations combine high
temperatures and hot that could
lead to burns.
z This appliance can be used by
children aged from 8 years and
above and persons with reduced
physical, sensory or mental
capabilities or lack of experience
and knowledge if they have been
given supervision or instruction
concerning use of the appliance
in a safe way and understand the
hazards involved.
z Children shall not play with the
appliance.
z Cleaning and user maintenance
shall not be made by children
without supervision.
z During operation and cool-down
the appliance and its mains cord
shall be kept out of reach of children
under 8 years.
z Ifthesupplycordisdamaged,itmust
be replaced by the manufacturer, its
service agent or similarly qualified
persons in order to avoid a hazard.
z Always unplug the station/iron
before filling with water.
z The appliance must be used and
rested on a flat, stable surface.
z During ironing pauses, place the
iron upright on its heel rest or on the
iron rest. Ensure that the heel rest is
placed on a stable surface.
z The iron must not be left unattended
while it is connected to the supply
mains.
z Do not open the boiler during
ironing.
z During use, the pressurised
apertures must not be opened
for filling, descaling, rinsing or
inspection.
z The appliance must not to be used
if it has dropped, if there are visible
signs of damage or if it is leaking.
Regularly check the cords for
damages.
z Never immerse the unit in water or
other liquids.
z This appliance is designed for
household use only and for
processing normal household
quantities.
z Please clean all parts before
first use or as required, following
the instructions in the Care and
Cleaning section.
z The cords should never come
in contact with hot objects, the
soleplate, water and sharp edges.
z Beforeplugginginto a socket,check
whether your voltage corresponds
with the voltage printed on the
bottom of the appliance and that
you are using an earthed socket.
z When using an extension cord watch
out that it is in good condition, has a
plug with an earth connection and
corresponds with the power rating
of the appliance (16A).
z The soleplate and the iron rest can
reach very high temperatures that
could lead to burns. Do not touch
them.
z CHOKING HAZARD: the appliance
might contain small parts. Some of
those small parts might be required
togetdisassembled during cleaning
and maintenance operations.
Handle with care and keep small
parts out of reach of children.
z Important: Keep all packaging
(plastic bags, polystyrene foam)
away from children.
5712870073_IS72xx_INT.indd 75712870073_IS72xx_INT.indd 7 15.07.22 11:1315.07.22 11:13

8
ENGLISH
Description
1 On/O button/icon
2 Boost button/icon (certain models only)
3 FastClean system button/icon
4 Water reserve icon
5a Steam setting icons
5b iMode selector
6 Steam button
7 Iron rest
8 Lock system
9 Removable water tank
10 Closure
11 Double cord / storage
12 Power cord / storage
13 Heel rest
Intended use
The appliance must be used only for iron-
ing garments which are suitable for ironing
according to the care label. In addition the
appliance can be used for refreshing. Nev-
er iron or dampen garments while wearing
them.
Before first use
When steam is ready for the first time we
recommend to iron for a few minutes over
a rag to avoid manufacturing residues can
dirty your garments.
(A) Filling the water tank
Make sure that the appliance is switched o
and the system is unplugged.
z Remove the water tank (9).
z Fill the water tank with tap water, taking
care not to exceed the “max” level but at
least up to the mark “min”.
z If you have extremely hard water, we
recommend that you use a mixture of
50 % tap water and 50 % distilled water.
z Never use distilled water exclusively. Do
not add any additives (e.g. starch). Do not
use condensation water from a tumble
dryer.
z Insert the water tank.
z Place the appliance on a stable, level
surface.
Note: If you use filtering devices or in-house
permanent descaler, make absolutely sure
the water obtained is neutral ph.
(B) Water reserve function
When the water level is becoming low, the
water reserve icon (4) starts flashing. At
this stage it is possible to continue steam
ironing for about 10-15 minutes.
When the water reserve icon turns perman-
ently on, it becomes necessary to refill the
water tank. At the same time, the On/O
icon (1) and the icon related to the selected
setting start flashing.
To continue steam ironing, refill the water
tank at least up to the mark “min”.
(C) Start into operation
Before start ironing follow the garment care
label instructions carefully. Fabrics with this
symbol are not ironable.
z Place the iron on the iron rest (7) or on
its heel rest (13), unwind completely both
cords (11,12), plug in the appliance and
press the On/O button (1).
z The iCare setting ( ) and the On/O
button start flashing and you hear an
acoustic signal. The iron will start to heat
up.
z Once the temperature is reached, the On/
O button and the related steam setting
icon turn permanently on and you hear an
acoustic signal indicating steam is ready.
5712870073_IS72xx_INT.indd 85712870073_IS72xx_INT.indd 8 15.07.22 11:1315.07.22 11:13

9
Steam ironing
Press the steam button (6) to release steam.
Dry ironing
Iron without pressing the steam button (6).
Please note that after 10 minutes of dry
ironing, the iron switches to the stand-by
mode. After additional 10 minutes the auto-
o mode is activated
Steam shot function
Press the steam button (6) twice in quick
succession within 1 second. There will be
a continuous steam emission for a few se-
conds.
Press the steam button once again during
steam emission to stop the function.
(D) Settings
When the appliance is switched on, it will al-
ways be set to the iCare setting, inde-
pendently on the last setting chosen.
To switch from one setting to another, press
the iMode selector (5b).
Eco
It is suggested for most delicate garments
like synthetics, silk and blended fabrics. This
setting allows less power consumption.
iCare
It is suggested for garments like wool, poly-
ester and cotton.
Turbo
It is suggested for garments that need more
powerful steam, like thick cotton/linen and
jeans.
This setting can also be used to refresh and
hygienize garments that were in the closet
before dressing.
Note: Do not use the hygienize function on
people and pets.
Boost function
With this setting you can iron with maximum
steam during 15 minutes.
z To activate press the boost button (2).
z The boost icon and the turbo icon
turn permanently on and you hear a short
beep.
z To stop this function, press the iMode
selector (5b) or the boost button again.
After 15 minutes you can continue ironing in
the turbo mode.
Note: The boost function is only available if
the temperature has been reached and ste-
am is ready.
ProSteam
This setting provides up to 30 seconds of
continuous steam, without pressing the ste-
am button (6).
As it has a similar steam rate to the iCare
setting it is suggested for the same garments
like wool, polyester and cotton.
z To activate this setting, select ProSteam
and press once the steam button (6).
z The iron will steam automatically for 30
seconds.
z To stop the function earlier, press the
steam button again.
5712870073_IS72xx_INT.indd 95712870073_IS72xx_INT.indd 9 15.07.22 11:1315.07.22 11:13

10
Vertical steam
The iron can also be used for steaming han-
ging clothes. Hold the iron in a vertical posi-
tion and select ProSteam setting.
Caution: steam is very hot. Never iron or
dampen garment while wearing them.
Ergonomic certification
This unit, assessed and certified by an Er-
gonomics Certifying Institute has been er-
gonomically designed, for eortless ironing
and excellent results fulfilling the ergonomic
requirements belonging to Polytechnical,
Biomedical, Psychosocial (usability) and
Human Centered Design Process area.
Real users have been actively involved in all
phases of product design and in testing pro-
cess to get a more satisfying experience.
Follow the below recommendations, for an
eortless and more comfortable ironing ex-
perience:
z Before starting your ironing session, it is
recommendable to self-adjust your ironing
board in order to reduce shoulders bad
postures. The ideal position should allow
a 90° angle for your elbow so that your
shoulders and back can freely move.
z In addition, for extra comfort and
convenience during storage and
transportation, wrap the power cord
around your hand before storing it inside
the machine securely, then block it with
the provided clip.
z It is recommendable emptying the water
tank before transporting the unit and
making sure not to overly bend your back
while lifting it.
(E) Auto Off
This function is activated if after 10 minutes
there has been no steam emission.
z When the iron is in the auto-o mode, the
On/O button (1) and the icon related to
the selected setting start flashing.
z To continue ironing, press any button and
wait until the related icon for the setting is
permanently on.
z After additional 10 minutes without steam
emission, the iron and the steam station
turn o.
(F) Descaling
Never open or touch the closure (10) when
the appliance is hot and/or plugged in.
Do not use any chemicals, additives or de-
scaler to rinse the boiler.
When the system needs to be decalcified the
FastClean icon (3) turns permanently on.
To perform the descaling take the following
steps:
z Switch o (1) and unplug the appliance.
z Empty the water tank.
z Wait until the appliance has cooled down
(minimum 2.5 hours).
z Place the appliance on the edge of the sink
and turn the closure (10) anticlockwise to
open it. Let the water flow into the sink.
z Clean the closure under running water to
remove the scale formations.
z When no more water comes out of the
appliance screw the closure clockwise to
close the boiler.
z Plug in and switch on.
z Press the FastClean system button (3) for
2 seconds to reset.
If the appliance is switched o without de-
scaling, the FastClean icon (3) turns per-
manently on again when it is next switched
on.
Note: Because of the dierent water com-
position by using an installed in-house
permanent descaler, it is recommended to
descale the system after every 4 complete
refills or at least once per month.
Please note that in this case the FastClean
icon will not automatically turn on.
5712870073_IS72xx_INT.indd 105712870073_IS72xx_INT.indd 10 15.07.22 11:1315.07.22 11:13

11
(G) After ironing
Care & Cleaning
After every ironing session remove and
empty the water tank.
z Before cleaning, always make sure that
the appliance is switched o, unplugged
and has cooled down completely.
z To clean the soleplate and the soft
material on the handle it is suggested to
use a damp cloth.
z Never use chemicals, vinegar or scouring
pads (eg. sponges with coarse nylon
fabrics etc).
Lock system
The appliance is equipped with a lock sys-
tem for convenient transportation and easy
storage. It is possible to lift and carry the ap-
pliance on the handle of the locked iron.
Note: Before transportation make sure the
iron is properly locked and the water tank is
empty.
z Place the soleplate into the recess on the
iron mat.
z To lock the iron push the slider (8) (easy
lock) toward the iron until you hear a
“click”.
z To unlock the iron push down the button
on the slider (easy lock). The iron will be
released.
Storage
Unplug, empty the water tank and let the ap-
pliance cool down before winding the cords
for storage.
For a convenient storage of the power cord
also refer to „Ergonomic Certification“.
Troubleshooting Guide
Problem Cause Solution
The appliance does
not switch on.
The appliance is not
plugged into a mains
socket.
Make sure the appliance is cor-
rectly connected and press the
On/O button.
Steam comes out
under the base unit. The “max” pressure safety system has opened.
Turn the appliance off immedi-
ately and contact an authorised
Braun Customer Service.
There are some water
drops from the holes
in the bottom of the
soleplate.
Water has condensed
inside the tubes because
steam is being used for the
first time, or has not been
used for some time.
Press the steam button sever-
al times away from the ironing
board. This will eliminate cold
water from the steam circuit.
Brown coloured fluid
leaks from the sole-
plate.
Chemical water softeners or
additives have been poured
into the water tank.
Never pour products into the water
tank. Clean the soleplate with a
damp cloth and rinse the boiler.
The first time the
appliance is turned
on, you notice smoke
or smell.
Some parts have been
treated with sealer/lubri-
cant which evaporates the
first time the iron heats up.
This is normal and will stop when
you have used the iron a few times.
If the smoke/smell is still present
after turning off the appliance, con-
tact an authorised Braun Customer
Service.
5712870073_IS72xx_INT.indd 115712870073_IS72xx_INT.indd 11 15.07.22 11:1315.07.22 11:13

12
The appliance emits
an intermittent noise
associated with vibra-
tions.
Water is being pumped into
the boiler. This is normal and no action is needed.
The closure is difficult
to unscrew.
Lime scale has made the
closure difficult to open.
Wenden Sie mehr Kraft auf, um den
Boilerverschluss zu lösen. Ent-
kalken Sie den Boiler regelmäßig,
um dieses Problem zu vermeiden.
The boiler is still under
pressure.
Never open the closure if the
boiler is still under pressure or
hot. Wait at least 2.5 hours before
opening the closure.
After refilling the water
tank, the icon does
not reset.
The water float does not
work appropriately. Empty the water tank, rinse out and refill.
The water tank is not posi-
tioned correctly. Position the water tank correctly.
All LEDs are flashing. System error.
Unplug the appliance, plug it in
again and press On/Off button. If
this problem is still present, turn
the appliance off immediately,
unplug and contact an authorised
Braun Customer Service.
Steamsetting icon
is permanently on,
but there is no steam
emission from the
soleplate.
Water tank float is locked
or the water tank is not
correctly inserted.
Turn off and unplug the appliance.
Remove and empty the water
tank, rinse out and refill. Insert the
water tank.
Wait until the appliance has
cooled down (min 2.5 hours) then
try again. If the problem is still
present, contact an authorized
Braun Customer Service.
Steam or water
comes out from the
closure.
The closure is not tightened
properly.
Switch off the appliance, unplug
and let it cool down (for at least
2.5 hours).
Unscrew the closure and screw it
back on the appliance properly.
Note: Some water can escape
when you unscrew the closure.
The double cord gets
hot during use.
This is normal. It is caused
due to the steam passing
through the cord during
ironing.
Place the double cord on the
opposite side so that you cannot
touch the cord during ironing.
5712870073_IS72xx_INT.indd 125712870073_IS72xx_INT.indd 12 15.07.22 11:1315.07.22 11:13

13
There are some water
drops when removing
the water tank
This is normal and no action is
needed.
5712870073_IS72xx_INT.indd 135712870073_IS72xx_INT.indd 13 15.07.22 11:1315.07.22 11:13

14
5712870073_IS72xx_INT.indd 145712870073_IS72xx_INT.indd 14 15.07.22 11:1315.07.22 11:13

15
5712870073_IS72xx_INT.indd 155712870073_IS72xx_INT.indd 15 15.07.22 11:1315.07.22 11:13

16
5712870073_IS72xx_INT.indd 165712870073_IS72xx_INT.indd 16 15.07.22 11:1315.07.22 11:13

17
5712870073_IS72xx_INT.indd 175712870073_IS72xx_INT.indd 17 15.07.22 11:1315.07.22 11:13

18
5712870073_IS72xx_INT.indd 185712870073_IS72xx_INT.indd 18 15.07.22 11:1315.07.22 11:13

19
5712870073_IS72xx_INT.indd 195712870073_IS72xx_INT.indd 19 15.07.22 11:1315.07.22 11:13

20
5712870073_IS72xx_INT.indd 205712870073_IS72xx_INT.indd 20 15.07.22 11:1315.07.22 11:13