Breed Von Glarus Series User manual

The Breed Von Glarus and Von Marcus Timepieces
(BRD4701 - BRD4704 / BRD6701 - BRD6704 series watches)
Setting Instructions:
1) Relocate the crown protector (BRD4701 - BRD4704 models).
2) Unscrew the crown y rotating it counterclockwise until it is free from the case threads.
3) Pull the crown out two clicks to its outermost position.
4) Rotate the crown clockwise until the date indicator advances one position.
5) Set the current time as follows:
-for AM hours advance the hands directly to the current time,
-for PM hours advance the hour hand one full rotation (12 hours) once, prior to setting the time.
6) Push the crown in one click to its middle position.
7) Set the current date y rotating the crown clockwise until the correct value is displayed.
8) Push the crown in to its innermost rest position to commence timekeeping.
9) Secure the crown to the case y pressing in on the crown then carefully starting the threads y rotating the
crown clockwise. Screw the crown down until it is fully seated – finger tighten only.
Note: Setting the time to AM / PM accordingly ensures that the date indicator changes at midnight rather than
noon. If the date indicator is changing in the afternoon advance the hour hand one full rotation (12 hours), then
reset the date indicator as necessary.

Timer Buttons:
The tachymeter uttons feature threaded collars that lock the uttons in place to prevent incidental activation and
to provide additional resistance to water penetration. To use the uttons they must e unlocked first.
To unlock: unscrew the collar y rotating it counterclockwise until it is flush with the underside of the utton.
To lock: screw the collar down y rotating it clockwise until it is secured to the case – finger tighten only.
Timer Functions:
Start / Stop / Reset
1) Press Button A to start the timer, press again to stop.
2) Press Button B to reset the timer / hands.
Lap Tracking
1) Press Button A to start the timer.
2) Press Button B to pause the hands of the timers (timer will continue running even though hands stop).
3) Press Button B to resume (timer hands will advance to current time).
4) To stop the timer press Button A, press again to resume.
5) To reset the timer press Button A to stop, then press Button B to reset.
Timer and Adjustment
1) Pull the crown out to its outermost position.
2) Press and hold Buttons A and B simultaneously until the timer second hand egins to move, then release.
3) Press Button A to adjust the timer second hand, press Button B once finished.
4) Press Button A to adjust the timer hour hand, press Button B once finished.
5) Press Button A to adjust the timer minute hand. If further adjustment is necessary, pressing Button B will engage
the timer second hand again, and the adjustment procedure may e repeated eginning at step 3.
6) Once adjustment is completed, set the time / date as necessary then push the crown ack in to its rest position
to commence timekeeping.
Note: pressing Button A once will advance the engaged timer hand y one increment, pressing and holding will
advance the engaged timer hand at an accelerated rate.
Water Resistance Guidelines:
20 ATM – Approved for moderate duration swimming / diving.
Note: the crown and uttons must e properly secured to the case to achieve the rated water resistance.
Additionally, manipulation of the crown or uttons while the watch is in contact with water will negate the rated
water resistance as water penetration may occur.
© Breed