Bretford MPD-15 User manual

POWER AND
DATA BLOCK
MODELS:
AssemblyInstructions
MPD-15
MPD-26
MPD-33
MPD-44
LIQUID™WORKSPACE

STEP 1
RemoveSubstationTopCoverby pulling it up.
Fig. 1

CoverPin
Plate
Cover Pin Plate Bolt
Substation
Spider
STEP 2
DisassembleCover Pin Plate andSubstation Spider by unfasteningthe Cover Pin Plate
Hex Head Bolts. Save hardware for reassembling.
Fig. 2

MetalVisual
Blocker
MetalVisual Blocker
Screw
STEP 3
DisassembleMetalVisualBlocker by unfastening the threeMetalVisual
Blocker Round Head Screws. Save hardware for reassembling.
Fig. 3

STEP 4
Slide one half of lower compartment closure inside other half to access Junction Box.
ThreadtheJumperendthroughtheSubstationandplugintoJunctionBox(Fig.4).
PlacethePower/DataBlockintopowerringofSubstationbyaligningCurvedCam
andPinswithgrooveinPowerRing.CurveCammustbepositionedsowhentighten-
ingHexBolt,CurvedCamrotatestowardcenterofSubstation.
Fig. 4 Fig. 4 shown with parts
removed for clarity
SubstationSkin
OpenPosition Junction
Box
Jumper
Power/Data
Block
Power
Ring
HexBolt
CurvedCam
(mustturn1/4”rotation
tofitin)

Fig. 5
STEP 5
Lock the Power/Data Block in desired position by
turningtheLockingBoltClock-wise.Reassemble
VisualBlocker,Substation Spider and Cover Pin
Plate (Fig. 5). Refer to steps 2 & 3.
Locking Bolt
Fig. 7
STEP 6
ReplaceTopCover,whilealigning the studs in theTopCoverwith Cover Pin
Plate holes (Fig. 6 & 7).
Top Cover
Stud CoverPin
Plate
Fig. 6
Part#031-6469
Rev.07.02.03 IM
Bretford Bretford Ltd.
11000 Seymour Avenue Technology House
Franklin Park, IL 60131 7 Lake End Court, Taplow
TEL: [phone] Bucks SL6 0JQ England
800.521.9614 TEL: [phone]
FAX: [phone] FAX: [phone]
800.343.1779
www.bretford.com