Breville Smart Air Plus User manual

the Smart Air PlusTM
Instruction Book - LAP500

2
BREVILLE
RECOMMENDS
SAFETY FIRST
At Breville we are very safety
conscious. We design and
manufacture consumer
products with the safety of you,
our valued customer, foremost
in mind. In addition, we ask that
you exercise a degree of care
and adhere to the following
precautions.
SPECIFICATIONS
Filter Life Approx. 6 months
Microbe ShieldTM Life Approx. 10,000 hours
Product Dimension 270 x 531.5mm
For Room Size 40 to 50m²
Noise Level 30~62dB
Power Consumption 65W
Weight 5kg
IMPORTANT
SAFEGUARDS
READ ALL
INSTRUCTIONS BEFORE
USE AND SAVE FOR
FUTURE REFERENCE
• Remove and safely discard
any packaging material and
promotional labels before
using the air purifier and filter
for the first time.
• To eliminate a choking
hazard for young children,
remove and safely discard the
protective cover fitted to the
power plug of this air purifier.
• When unpacking the air
purifier, check to see you
have received all the items
listed in the parts list, before
discarding the packaging.
• This air purifier is intended
for household use only
and not for commercial or
industrial use.
• Do not use outdoors.
• Always ensure the air purifier
is properly assembled before
use. Follow the instructions
provided in this book.
• Do not place the air purifier
near the edge of a bench
or table during operation.
Ensure the surface is level,
clean and free of water.
2 Breville Recommends Safety First
6 Components
7 Control Panel
8 Features
8 Assembly
9 Functions
10 Care, Cleaning & Storage
12 Troubleshooting
Contents

3
• Keep the power cord out of
heavy traffic areas. To avoid
fire hazard, never put the
power cord under rugs, near
heat registers, radiator, stoves
or heaters.
• To protect against electrical
hazards, do not immerse in
water or other liquids.
Do not use the air purifier in
the immediate surroundings
of a bath, a shower or a
swimming pool.
• Children should be
supervised to ensure they do
not play with the air purifier.
• Always turn off and unplug
the air purifier before moving,
opening the grill, changing
filters and cleaning or
whenever the air purifier
is not in use.
• Do not unplug the air purifier
by pulling on the power cord.
Always unplug using the
power plug.
• Never insert fingers, pencils
or any other objects through
the guards whenever the
power plug is connected,
in particular, while the air
purifier is switched on.
• Do not run the power cord
under carpeting or cover the
power cord with rugs, runners
or the like. Arrange the power
cord away from traffic areas
and where it will not be
tripped over.
• Do not route power cord
under furniture or appliances.
• Do not operate the air purifier
with a damaged power cord or
plug, or if the air purifier has
been dropped or damaged in
any manner, return the air
purifier to your nearest
Breville service centre for
examination, electrical or
mechanical adjustment
or repair.
• Do not use the air purifier with
an external timer, programmer
or any other device that
switches the air purifier on
automatically since a fire risk
may exist if the air purifier
is covered or positioned
incorrectly.
• Do not place anything on top
of air purifier when assembled,
when in use and when stored.
• Never block the air openings,
grills/outlets or place on a soft
surface such as a bed or sofa,
as this could cause the unit to
tip over, blocking the air inlet
or outlet opening.

4
• Do not attempt to repair or
adjust any electrical or
mechanical functions on this
unit. Doing so will void
your warranty. The inside
of the unit contains no user
serviceable parts. All servicing
should be performed by
qualified personnel only.
• This air purifier contains a
UV-C emitter.
• Unintended use of the
appliance or damage to the
housing may result in the
escape of dangerous. UV-C
light radiation. UV-C light
radiation may, even in little
doses, cause harm to the eyes
and skin.
• Keep the air purifier and
dust filters clean. Follow the
cleaning instructions provided
in this book.
IMPORTANT
SAFEGUARDS FOR
ALL ELECTRICAL
APPLIANCES
• Fully unwind the power cord
before use.
• Connect only to a 230V or
240V power outlet.
• Do not let the power cord
hang over the edge of a bench
or table, touch hot surfaces or
become knotted.
• To protect against electric
shock, do not immerse the
power cord, power plug or
appliance in water or any
other liquid or allow moisture
to come in contact with the
part, unless it is recommended
in the cleaning instructions.
• The appliance is not
intended for use by persons
(including children) with
reduced physical, sensory
or mental capabilities, or
lack of experience and
knowledge, unless they have
been given supervision or
instruction concerning use
of the appliance by a person
responsible for their safety.
• Children should be supervised
to ensure that they do not play
with the appliance.
• It is recommended to
regularly inspect the
appliance. To avoid a hazard,
do not use the appliance if
power cord, power plug or
appliance becomes damaged
in any way. Return
the entire appliance to
the nearest authorized
Breville Service Centre for
examination and/or repair.

5
• Any maintenance other than
cleaning should be performed
at an authorised Breville
Service Centre.
• This appliance is for
household use only.
Do not use this appliance
for anything other than its
intended use. Do not use in
moving vehicles or boats.
Do not use outdoors.
Misuse may cause injury.
• The installation of a residual
current device (safety switch)
is recommended to provide
additional safety protection
when using electrical
appliances. It is advisable that
a safety switch with a rated
residual operating current not
exceeding 30mA be installed
in the electrical circuit
supplying the appliance.
See your electrician for
professional advice.
• During electrical storms,
the appliance should be
disconnected from the power
source at the wall socket to
prevent any electrical surges
that may arise during the
storm and which may
inadvertently cause damage
to the appliance and its
electronic componentry.
• Always turn the appliance
to the off position, switch off
at the power outlet and
unplug at the power outlet
when the appliance is not
in use.
• Before cleaning, always turn
the appliance to the off
position, switch off at the
power outlet, unplug at
the power outlet and remove
the power cord, if detachable,
from the appliance and allow
all parts to cool.
• Do not place this appliance
on or near a heat source, such
as hot plate, oven or heaters.
• Position the appliance at a
minimum distance of 20cm
away from walls, curtains and
other heat or steam sensitive
materials and provide
adequate space above and on
all sides for air circulation.
FOR HOUSEHOLD USE ONLY
SAVE THESE INSTRUCTIONS

6
Components
A. Air Outlet
B. Control Panel
C. Main Housing Body
D. Air Quality Sensor
E. Air Inlet
F. Microbe ShieldTM Light and Holder
A
B
C
D
E
G
F
H
I
G. 3-Layer Filter
H. Base Plate
I. Locking Knob
NOT PICTURED
Power Cord
Mesh Filter

7
AUTO
2H
4H
12H
REPLACE
FILTER
LOW MED HIGH TURBO
LOCKNIGHT SPEED AUTO TIMER
M
I
C
R
O
B
E
S
H
I
E
L
D
Control Panel
A. LED Screen
B. Power On/Off and Filter Reset Button
C. Microbe ShieldTM/Night Mode
D. Child Lock
E. Fan Speed
(includes 4 speed modes; Low, Medium, High and Turbo)
F. Auto Mode
G. Timer
(up to 12 hours)
H. Air Quality Sensor Light
The Breville Smart Air PlusTM Purifier has a visible air quality sensor
light around the control panel. The light illuminates to indicate the
quality of the surrounding air according to the table following:
E F
H
C
B
A
D G
Grade Air Quality AQI* Measured
in PM2.5
Colour
of Light
1Very Good < 33 Blue
2Good 34–66 Yellow
3Fair 67–99 Orange
4Poor > 100 Red
* Air Quality Index.

8
YOUR BREVILLE AIR PURIFIER
Your Breville Smart Air PlusTM Purifier
improves your indoor air quality using
4 distinct levels of protection.
1. A Pre-Filter
Captures larger airborne particles such as
human hair, pet dander and dust particles.
2. A True HEPA Filter
Traps up to 99.97% of allergens and
airborne contaminants down to 0.3 microns
in size. These include dust, mould spores,
plant spores, and pollen.
3. An Activated Carbon Membrane
Along with assisting in the capture of
dust, smoke, pollen and other airborne
allergens, the activated carbon membrane
helps to neutralise odours in the home and
to eliminate fumes emitted by household
products as well as other volatile organic
compounds (VOC’s) that might be found
in the air.
4. Microbe ShieldTM Technology
Microbe Shied technology uses a shortwave
UV-C light specially designed to target
germs and bacteria from the incoming air
as it passes through the air purifier before
releasing the air back into the surrounding
area. The Microbe ShieldTM function can be
turned on and off according to preference.
Features Assembly
BEFORE FIRST USE
• Remove and safely discard any packaging
material or promotional labels attached to
your air purifier and filter.
• Remove the filter from the air purifier
(see REPLACING THE FILTER on page 11)
and take it out of the plastic bag. Then
re-insert the filter into the air purifier.
• Select a flat and level location for the air
purifier.
• For proper air flow, locate the unit at least
20cm from any wall or furniture.
• Ensure the air inlet and outlets are not
blocked before use.
• Ensure the filter has been fitted correctly
as per the instructions in this book.
• Plug the power plug into a 230V OR 240V
power outlet and turn on the power outlet.
IMPORTANT
When moving the air purifier, always lift
the unit using two hands and set down
gently on a flat and level surface.

9
Functions
OPERATING YOUR AIR PURIFIER
1. Press the POWER button to turn on and
the control panel will illuminate.
2. The air quality sensor light will illuminate,
usually starting with a blue light until it has
time to sense the air quality and then it may
change to an alternate colour.
3. The air purifier will begin operation in the
last mode selected (excluding Night mode
and timer).
4. To adjust how the air purifier operates,
follow the directions below.
NOTE
The replace filter icon will illuminate indicating
that the filter needs to be replaced. To reset
the indicator after the filter has been replaced,
press and hold the POWER button for 5
seconds.
SensAirTM LIVE PURITY CONTROL
• Your Breville Smart Air PlusTM Purifier has a
built-in air quality sensor to detect changes to
air quality in the surrounding area.
• The SensAirTM light around the control panel
will change colours according to the quality
of the surrounding air.
• The LED screen provides real-time indication
of fine particles PM2.5 concentration.
Microbe ShieldTM/NIGHT MODE
The Microbe ShieldTM and Night Modes utilise
the same button on the control panel. Pressing
the Microbe ShieldTM
/NIGHT button will
cycle through these two settings.
Microbe ShieldTM
• Press the Microbe ShieldTM/NIGHT mode
button until the Microbe ShieldTM icon
illuminates to turn it on.
• Press the button repeatedly until the light
extinguishes to turn off this function.
Night Mode
• To turn on Night mode, press the Microbe
ShieldTM
/NIGHT button repeatedly until the
icon starts to blink.
• Press again until the light extinguishes to
turn off this function.
• After 10 blinks, all indicator lights on
the control panel will turn off as the unit
enters night mode and the fan speed will
automatically change to Low.
• Press any button on the control panel to
re-engage the control panel and turn off
night mode. The icon will extinguish.
NOTE
The Night mode function does not save for
next use when the air purifier is switched off.
This function will need to be reset.

10
FAN SPEED/TURBO MODE
NOTE
The air purifier will resume in the last
programmed setting once it has been turned
off, excluding Night mode, even if turned off
at the power outlet.
• Press the FAN SPEED button repeatedly
until the desired speed is illuminated on the
control panel.
• There are 4 fan speeds: Low, Medium, High
and Turbo.
• The icons will illuminate showing the
selected fan speed.
NOTE
When changing the fan speed, the unit may
take a few seconds to adjust.
TIMER
• The air purifier can be set to operate for
timed intervals of 2 hours, 4 hours and 12
hours, stopping automatically when the
selected operating time has elapsed. If no
timer is set, the air purifier will continuously
operate until it is manually switched off.
• Press the TIMER button repeatedly until
the desired interval hours are illuminated on
the control panel.
• For continuous operation, press the
TIMER button repeatedly until there are no
lights illuminated under the timer intervals.
AUTO MODE
• When in Auto mode, the air purifier will
automatically adjust the speed to help filter
the air based on the sensor reading.
• To set to Auto, press the AUTO button until
the Auto icon illuminates.
• Press the AUTO button again, to turn Auto
off and Auto icon will extinguish.
IMPORTANT
Turning the unit On and Off will require
cycling through the Auto mode.
CHILD LOCK
The air purifier control panel can be locked to
inactivate the buttons.
1. To engage the child lock, press and hold the
CHILD LOCK button for 5 seconds.
2. To turn off, press and hold again for
5 seconds.
FILTER RESET
• The replace filter icon will illuminate
indicating that the filter needs to be replaced.
• Replace the filter according to the directions
found under Replacing the Filter in this book.
• Once the filter is replaced, press and hold
the POWER button for 5 seconds to reset
the Filter Reset light.
• The built-in timer for the filter reset is 4,320
operating hours.
NOTE
For best performance, the filter should be
cleaned at least monthly as per the instructions
found in the Care, Cleaning & Storage section
of this book.

11
Care, Cleaning
& Storage
The air purifier and filter should be cleaned at
least once every month. Ensure the air purifier
is switched off and disconnected from the
power outlet and allow all parts to cool before
cleaning or storing.
• Use a clean, dry cloth to clean all external
surfaces of the air purifier.
NOTE
More frequent cleaning may be required
depending on environmental conditions.
BREVILLE RECOMMENDS
• Always ensure the air purifier is turned
off, switched off at the power outlet and
unplugged and allow the unit to cool
before performing any cleaning or filter
replacement.
 DO NOT stick any foreign objects or your
fingers inside the air inlet/outlet of this unit.
 DO NOT use gasoline, benzine, thinner,
harsh cleaners, etc. on and/or in the unit
while cleaning as they will damage the unit.
 NEVER use alcohol or other solvents
on this unit.
CLEANING THE SENSOR
• It is important to keep the air quality sensor
clean for best performance.
• The air quality sensor is situated behind
a grill at the rear of the unit.
• Gently vacuum the air quality sensor grill
using a small hand brush tool. Cleaning
should occur regularly, at least once a month.
• For more thorough cleaning, remove the
cover by using the raised tab on the edge
of the cover. Push inwards and outwards
simultaneously to open the cover, noting
that it will be tight.
• Gently vacuum the mesh filter and metal
shield of the air quality sensor using the
hand brush tool. Thorough cleaning should
occur at least once every six months.
• Replace the mesh filter and cover when
clean, ensuring it clicks into place.
WARNING
The air quality sensor is fragile and can be
damaged if excessive force is used during
cleaning. Please use extra care when cleaning.
FILTER CARE & CLEANING
WARNING
The filter is not washable. Do not immerse
any part of the air purifier in water as it will
cause damage.
• The Pre-filter should be cleaned at least once
every month using a vacuum cleaner. Gently
vacuum using a hand-tool attachment such
as a brush or upholstery tool. Clean more
often if required.
• Do not attempt to clean the carbon filter with
a vacuum as this can cause damage.
• Do not use any solutions, hard bristle
brushes or sharp objects to clean as this
can cause damage.
• Replace the filter as indicated using the
following instructions.

12
REPLACING THE FILTER
Your Smart Air PlusTM Purifier filter should be
replaced in the time frames indicated below.
• The filter life is approximately 6 months
if used 24 hours daily, or 12 months if used
12 hours daily.
• The filter life may vary to this timing
depending on environmental conditions.
• Remove all packaging from the replacement
filter and place the filter into the unit as
described below.
1. Carefully, turn your air purifier upside down
and remove the locking knob from the base
of the unit.
2. Remove the base plate.
3. Remove the used filter, being careful that
any residue or debris that may fall from the
filter will not cause damage.
4. Insert the replacement filter into the unit,
ensuring that it is correctly fitted and
centred.
5. Replace the base plate and refasten the
locking knob.
6. Return the air purifier to an upright
position.
7. Turn on the air purifier then press and
hold the POWER button for 5 seconds
to reset the Filter Reset light.
NOTE
There is no top or bottom on the filter. The
filter can be placed into the unit either way.
NOTE
If the filter is not in place or not fitted correctly,
the air purifier will not operate.
WARNING
Unintended use of the air purifier or damage
to the housing may result in the escape of
dangerous UV-C radiation which is dangerous
to the eyes and skin. Never operate the UV-C
light outside of the air purifier.
CARE OF UV-C LIGHT
The replacement of the UV-C light must be
undertaken at an authorised Breville service
centre. Please contact Breville Customer
Service Centre for further support.
REPLACEMENT FILTERS
Replacement filters must be purchased from
the Breville website^ or at participating retail
outlets.
See the table below for the replacement
product code to suit this Breville AirPurifier.
Breville AirPurifier
Model No.
Filter Replacement
Product Code
the Easy AirTM
LAP150WHT
LAP015WHT
the Smart AirTM
LAP300WHT
LAP030WHT
the Smart Air PlusTM
LAP500WHT
LAP050WHT
^Delivery charges may apply.
Please contact Breville Customer Service
Centre for further support.
Only use the original Breville filter specially
intended for this appliance. Do not use any
other filters.

13
Troubleshooting
MINI TROUBLESHOOTING GUIDE
Before carrying out any of the following service checks, unplug the unit from the mains.
PROBLEM WHAT TO DO
Unit will not start. • Check that the power plug is connected to a power outlet
and the outlet is turned on.
• Check that air purifier is assembled correctly.
• Check that the filter is fitted correctly in place.
Insufficient air flow. • Check that the filters are clean.
• Check for any obstructions in the air inlet and/or outlet.
Excessive noise. • Check for any foreign objects that may be in contact with the fan.
• Check if the filter is clogged and ready for replacement.
• Check that the air purifier has been assembled correctly and the
locking knob has been tightened.
• Check that the unit is on a level surface.
UV-C Light not illuminating • Contact Breville service centre for UV-C light replacement.

14
NOTE

15
NOTE

Australian Customers
Phone: [phone]
Web: www.breville.com
New Zealand Customers
Phone: [phone]
Web: www.breville.com
Breville Customer Service Centre
Breville, the Breville logo, Master Every Moment, Smart Air Plus, SensAir and the Microbe Shield logo
are trademarks of Breville Pty. Ltd. A.B.N. 98 000 092 928.
Copyright Breville Pty. Ltd. 2019.
Due to continued product improvement, the products illustrated/photographed in this booklet
may vary slightly from the actual product.
LAP500 ANZ D19