Philips AC6608 User manual

AC6608
© 2018 Koninklijke Philips N.V.
All rights reserved.
4241 210 98292
EN User manual 1
CS Příručka pro uživatele 17
HU Felhasználói kézikönyv 33
PL Instrukcja obsługi 50
RO Manual de utilizare 67
SK Príručka užívateľa 84
UK Посібник користувача 101
1 2
B
C
D
E
A F
G

3S 3S
3S 3S
3秒
3S

1EN
English
Contents
1 Important 2
Safety 2
2 Your air purier 5
Product Overview (g. a) 5
Controls overview (g. b) 5
3 Getting started 6
Installing lters 6
4 Using the appliance 7
Understanding the air
quality light 7
Switching on and o 7
Changing the fan speed 8
Child lock 8
Using the light On/O function 8
Switching the display indicator 9
5 Cleaning 9
Cleaning schedule 9
Cleaning the body of the
appliance 10
Cleaning the air outlet cover 10
Cleaning the air quality
sensor 10
Cleaning the pre-lter 10
6 Replacing the air
purication lters 11
Understanding the healthy
air protect lock 11
Replacing the air purication
lter 11
7 Resetting the lter lifetime
counter 12
8 Troubleshooting 13
9 Guarantee and service 15
Order parts or accessories 15
10 Notices 15
Electromagnetic elds (EMF) 15
Recycling 16

2EN
1 Important
Safety
Read this user manual carefully before
you use the appliance, and save it for
future reference.
Danger
• Do not let water or any
other liquid or ammable
detergent enter the
appliance to avoid electric
shock and/or a re
hazard.
• Do not clean the
appliance with water,
any other liquid, or a
(ammable) detergent to
avoid electric shock and/
or a re hazard.
• Do not spray any
ammable materials
such as insecticides or
fragrance around the
appliance.
Warning
• Check if the voltage
indicated on the
appliance corresponds to
the local power voltage
before you connect the
appliance.
• If the power cord is
damaged, you must have
it replaced by Philips, a
service center authorized
by Philips, or similarly
qualied persons in order
to avoid a hazard.
• Do not use the appliance
if the plug, the power
cord, or the appliance
itself is damaged.
• This appliance can be
used by children aged
from 8 years and above
and persons with reduced
physical, sensory or
mental capabilities or
lack of experience and
knowledge if they have
been given supervision or
instruction concerning use
of the appliance in a safe
way and understand the
hazards involved. Child
shall not play with the
appliance. Cleaning and
maintenance shall not be
made by children without
supervision.
• Do not block the air inlet
and outlet, e.g. by placing
items on the air outlet or
in front of the air inlet.
• Make sure that foreign
objects do not fall into the
appliance through the air
outlet.

3EN
English
Caution
• This appliance is not
a substitute for proper
ventilation, regular
vacuum cleaning, or use
of an extractor hood or
fan while cooking.
• If the power socket used
to power the appliance
has poor connections,
the plug of the appliance
becomes hot. Make
sure that you plug the
appliance into a properly
connected power socket.
• Always place and use the
appliance on a dry, stable,
level, and horizontal
surface.
• Leave at least 20cm free
space behind and on both
sides of the appliance
and leave at least 30cm
free space above the
appliance.
• Do not place anything on
top of the appliance.
• Do not sit or stand on the
appliance. The appliance
is equipped with omni
wheels. Sitting or standing
on the appliance may
lead to potential injury.
• Do not place the
appliance directly below
an air conditioner to
prevent condensation
from dripping onto the
appliance.
• Make sure all lters
are properly installed
before you switch on the
appliance.
• Only use the original
Philips lters specially
intended for this
appliance. Do not use any
other lters.
• Combustion of the lter
may cause irreversible
human hazard and/or
jeopardize other lives. Do
not use the lter as fuel or
for similar purpose.
• Avoid knocking against
the appliance (the air inlet
and outlet in particular)
with hard objects.
• Always lift or move
the appliance by both
handles at the sides of the
appliance.
• Do not insert your ngers
or objects into the air
outlet or the air inlet to
prevent physical injury
or malfunctioning of the
appliance.

4EN
• Do not use the appliance
in wet surroundings or in
surroundings with high
ambient temperatures,
such as the bathroom,
toilet, or kitchen.
• The appliance does
not remove carbon
monoxide (CO) or radon
(Rn). It cannot be used
as a safety device in
case of accidents with
combustion processes
and hazardous chemicals.
• If you need to move the
appliance, disconnect the
appliance from the power
supply rst. The appliance
is equipped with omni
wheels and is easy to
move.
• When moving the
appliance, do it slowly
and do not push it rapidly.
• Do not move the
appliance by pulling its
power cord.
• Do not use this appliance
when you have used
indoor smoke-type insect
repellents or in places
with oily residues, burning
incense, or chemical
fumes.
• Do not use the appliance
near gas appliances,
heating devices or
replaces.
• Always unplug the
appliance after use
and before cleaning
or carrying out other
maintenance.
• Do not use the appliance
in a room with major
temperature changes,
as this may cause
condensation inside the
appliance.
• To prevent interference,
place the appliance
at least 2m away from
electrical appliances that
use airborne radio waves
such as TVs, radios, and
radio-controlled clocks.
• The appliance is only
intended for household
use under normal
operating conditions.

5EN
English
Controls overview
(g. b)
Power On/O (lter reset)
button
Auto speed
Silent speed
Speed 1
Speed 2
Speed 3
Turbo speed
Pre-lter cleaning alert
Air purication lter
replacement alert
Light On/O (child lock) button
2 Your air purifier
Congratulations on your purchase, and
welcome to Philips!
To fully benet from the support that
Philips oers, register your product at
www.philips.com/welcome.
This appliance works with an air
ltration system. Read this user manual
carefully before you use the appliance,
and save it for future reference.
Product Overview
(g. a)
ASpeed knob
BNanoProtect lter Series 3
(FY6172)
CNanoProtect lter Active Carbon
(FY6171)
DPre-lters
ESide panels
FAir quality sensor
GAir outlet cover

6EN
Note
• Make sure that the side with the
two clips is pointing towards you,
and that all hooks of the pre-lter
are properly attached to the purier.
6 To reattach the side panel, mount
the panel onto the bottom of the
appliance rst (1). Then, gently push
the panel against the body of the
appliance (2) (g. h).
7 Repeat the above steps and
assemble the air purication lters
for the other side of the appliance.
3 Getting started
Installing lters
Remove all packaging of the lters
before using the appliance. Unpack
them and place them into the appliance
described as follows:
Note
• There is one set of lters on each
side of the appliance. Each side is
equipped with one pre-lter and
two air purication lters.
• Make sure that you place the air
purication lters in the appliance
rst and then the pre-lter.
• Make sure that the side with the tag
is pointing towards you.
1 Remove all packaging materials of
the air purication lters (g. c).
2 Pull the top part of the side panel to
remove it from the appliance
(g. d).
3 Press the two clips down and pull
the pre-lter towards you (g. e).
4 Put the unpacked air purication
lters into the appliance (g. f).
Note
• Put the NanoProtect lter in the
appliance rst, and then the Active
Carbon lter.
5 Put the pre-lter back into the
appliance (g. g).

7EN
English
4 Using the
appliance
Understanding the air
quality light
PM2.5
level
Color of the
air quality
light
Air quality
level
≤12 Blue Good
13-35 Blue-Purple Fair
36-55 Purple-Red Poor
>55 Red Very poor
The air quality light automatically goes
on when the appliance is switched on,
and lights up all colors in sequence.
In a short time the air quality sensors
select the color that corresponds to the
ambient air quality.
PM2.5
AeraSense sensing technology
accurately detects and quickly responds
to even the slightest particle change in
the air. It provides you with reassurance
with real-time PM2.5 feedback.
Switching on and o
1 Put the plug of the appliance into
the wall socket.
»The appliance beeps.
»All lights go on once and then
go out again.
2 Press the power On/O button
to switch on the appliance (g. i).
»The default fan speed is
(AUTO).
»After measuring the air quality
for a short time, the air quality
sensor automatically selects
the color of the air quality light.
»The running strips " "
displays on the screen when
the appliance is measuring
the PM2.5 level. After a short
time the actual PM2.5 level will
display on the screen (g. j).
3 Press the power On/O button
again to switch o the appliance.

8EN
Changing the fan speed
(AUTO)
In auto mode, the appliance selects
the fan speed in accordance with the
ambient air quality.
• Turn the speed knob to select the
auto speed (g. k).
»and the current fan speed
indicator lights up.
Manual
• Turn the speed knob to select the
fan speed you need (g. l):
(Silent speed)
(Speed 1)
(Speed 2)
(Speed 3)
(Turbo speed)
Tip
• If the air quality light lights up blue,
it indicates that the air quality is
good, and you can select a lower
fan speed. On the other hand, if
the air quality light lights up red-
purple or red, it indicates that the
air quality is unhealthy, and you can
select a higher fan speed to purify
the air more quickly.
Child lock
To keep children from using the
appliance, or to avoid any misoperation,
you can activate child lock.
1 Press and hold the light On/O
button for 3 seconds (g. m).
»The child lock indicator lights
up on the screen to show
that the child lock has been
activated.
Note
• When the child lock is activated, the
speed knob and all buttons will no
longer respond to any operation.
2 To deactivate the child lock, press
and hold the light On/O button for
3 seconds again (g. n).
»The child lock indicator goes
o.
Using the light On/O
function
With the light On/O button, you can
switch on or o the air quality light and
the display screen if needed.
1 Touch the light On/O button
once, the air quality light and
display screen will go out.
2 Touch the light On/O button
again. the fan speed indicator will
go out.
3 Touch the light On/O button
for the third time, all lights and the
display screen will go on again.