Breville EasyAir Purifier LAP150 User manual

the Easy AirTM Purifier
Instruction Book - LAP150

2
BREVILLE
RECOMMENDS
SAFETY FIRST
At Breville we are very safety
conscious. We design and
manufacture consumer
products with the safety of you,
our valued customer, foremost
in mind. In addition, we ask that
you exercise a degree of care
and adhere to the following
precautions.
SPECIFICATIONS
Filter Life Approx. 6 months
Microbe ShieldTM Life Approx. 10,000 hours
Product Dimension 194 x 321mm
For Room Size 25 to 30m²
Noise Level 30~60dB
Power Consumption 12W
Weight 2kg
IMPORTANT
SAFEGUARDS
READ ALL
INSTRUCTIONS BEFORE
USE AND SAVE FOR
FUTURE REFERENCE
• Remove and safely discard
any packaging material and
promotional labels before using
the air purifier and filter for the
first time.
• To eliminate a choking hazard
for young children, remove and
safely discard the protective
cover fitted to the power plug
of this air purifier.
• When unpacking the air
purifier, check to see you have
received all the items listed in
the parts list, before discarding
the packaging.
• This air purifier is intended for
household use only and not for
commercial or industrial use.
• Do not use outdoors.
• Always ensure the air purifier is
properly assembled before use.
Follow the instructions provided
in this book.
• Do not place the air purifier
near the edge of a bench or
table during operation. Ensure
the surface is level, clean and
free of water.
2 Breville Recommends Safety First
6 Components
7 Control Panel
8 Features
8 Assembly
9 Functions
10 Care, Cleaning & Storage
12 Troubleshooting
Contents

3
• Keep the power cord out of
heavy traffic areas. To avoid
fire hazard, never put the cord
under rugs, near heat registers,
radiator, stoves or heaters.
• To protect against electrical
hazards, do not immerse in
water or other liquids. Do
not use the air purifier in the
immediate surroundings of
a bath, a shower or
a swimming pool.
• Children should be supervised
to ensure they do not play with
the air purifier.
• Always turn off and unplug
the air purifier before moving,
opening the grill, changing
filters, cleaning or whenever
the air purifier is not in use.
• Do not unplug the air purifier
by pulling on the power cord.
Always unplug using the
power plug.
• Never insert fingers, pencils or
any other objects through the
guards whenever the power
plug is connected, in particular,
while the air purifier is
switched on.
• Do not run the power cord
under carpeting or cover the
power cord with rugs, runners
or the like. Arrange the power
cord away from traffic areas
and where it will not be
tripped over.
• Do not route power cord
under furniture or appliances.
• Do not operate the air purifier
with a damaged power cord
or plug, or if the air purifier
has been dropped or
damaged in any manner.
Take the air purifier to your
nearest Breville service centre
for examination, electrical
or mechanical adjustment
or repair.
• Do not use the air purifier
with an external timer,
programmer or any other
device that switches the air
purifier on automatically
since a fire risk may exist if
the air purifier is covered or
positioned incorrectly.
• Do not place anything on
top of the air purifier when
assembled, when in use and
when stored.
• Never block the air openings,
grills/outlets or place on a soft
surface such as a bed or sofa,
as this could cause the unit to
tip over, blocking the air inlet
or outlet opening.

4
• Do not attempt to repair
or adjust any electrical or
mechanical functions on
this unit. Doing so will void
your warranty. Other than the
filter, the inside of the unit
contains no user serviceable
parts. All servicing should
be performed by qualified
personnel only.
• This air purifier contains a
UV-C emitter.
• Unintended use of the
appliance or damage to the
housing may result in the
escape of dangerous UV-C
light radiation. UV-C light
radiation may, even in little
doses, cause harm to the eyes
and skin.
• Keep the air purifier and
dust filters clean. Follow
the cleaning instructions
provided in this book.
IMPORTANT
SAFEGUARDS
FOR ALL
ELECTRICAL
APPLIANCES
• Fully unwind the power cord
before use.
• Connect only to a 230V or
240V power outlet.
• Do not let the power cord
hang over the edge of a bench
or table, touch hot surfaces or
become knotted.
• To protect against electric
shock, do not immerse the
power cord, power plug or
appliance in water or any
other liquid or allow
moisture to come in contact
with the part, unless it is
recommended in the cleaning
instructions.
• The appliance is not
intended for use by persons
(including children) with
reduced physical, sensory or
mental capabilities, or lack of
experience and knowledge,
unless they have been given
supervision or instruction
concerning use of the
appliance by a person
responsible for their safety.
• Children should be
supervised to ensure that
they do not play with the
appliance.
• It is recommended to
regularly inspect the
appliance. To avoid a hazard,
do not use the appliance if
power cord, power plug or
appliance becomes damaged
in any way. Return
the entire appliance to
the nearest authorized

5
Breville Service Centre for
examination and/or repair.
• Any maintenance other than
cleaning should be performed
at an authorised Breville
Service Centre.
• This appliance is for
household use only.
Do not use this appliance
for anything other than its
intended use. Do not use in
moving vehicles or boats.
Do not use outdoors.
Misuse may cause injury.
• The installation of a residual
current device (safety switch)
is recommended to provide
additional safety protection
when using electrical
appliances. It is advisable
that a safety switch with
a rated residual operating
current not exceeding
30mA be installed in the
electrical circuit supplying
the appliance. See your
electrician for professional
advice.
• During electrical storms,
the appliance should be
disconnected from the power
source at the wall socket
to prevent any electrical
surges that may arise during
the storm and which may
inadvertently cause damage
to the appliance and its
electronic componentry.
• Always turn the appliance to
the off position, switch off at
the power outlet and unplug
at the power outlet when the
appliance is not in use.
• Before cleaning, always turn
the appliance to the off
position, switch off at the
power outlet, unplug at the
power outlet and remove the
power cord, if detachable,
from the appliance and allow
all parts to cool.
• Do not place this appliance
on or near a heat source, such
as hot plate, oven or heaters.
• Position the appliance at a
minimum distance of 20cm
away from walls, curtains and
other heat or steam sensitive
materials and provide
adequate space above and on
all sides for air circulation.
FOR HOUSEHOLD USE ONLY
SAVE THESE INSTRUCTIONS

6
Components
A. Control Panel
B. Main Housing Body
C. Air Inlet
D. Microbe ShieldTM UV-C Light and Light Guard
E. 3-Layer Filter
F. Base Plate
G. Locking Knob
NOT PICTURED
Air Outlet
Adaptor Inlet Socket
Adaptor Plug
A
B
C
D
E
F
G

7
Control Panel
A. Power On/Off and Filter Reset Button
B. Microbe ShieldTM/Night Mode
C. Timer
(up to 8 hours)
D. Fan Speed
(includes 4 speed modes; Low, Medium, High and Turbo)
FILTER
RESET
TIMER SPEED
M
I
C
R
O
B
E
S
H
I
E
L
D
2H 4H 8H LOW MED HIGH
TURBO
NIGHT
D
B
A
C

8
YOUR BREVILLE AIR PURIFIER
Your Breville Easy AirTM Purifier improves your
indoor air quality using 4 distinct levels
of protection.
3-LAYER, HEAVY-DUTY FILTER:
1. A Pre-Filter
Captures larger airborne particles such as
human hair, pet dander and dust particles.
2. A True HEPA Filter
Traps up to 99.97% of allergens and
airborne contaminants down to 0.3 microns
in size. These include dust, mould spores,
plant spores, and pollen.
3. An Activated Carbon Membrane
Along with assisting in the capture of
dust, smoke, pollen and other airborne
allergens, the activated carbon membrane
helps to neutralise odours in the home and
to eliminate fumes emitted by household
products as well as other volatile organic
compounds (VOC’s) that might be found
in the air.
4. Microbe ShieldTM Technology
Microbe ShieldTM technology uses a
shortwave UV-C light specially designed
to target germs and bacteria from the
incoming air as it passes through the air
purifier before releasing the air back into
the surrounding area. The Microbe ShieldTM
function can be turned on and off according
to preference.
Features Assembly
BEFORE FIRST USE
• Remove and safely discard any packaging
material or promotional labels attached to
your air purifier and filter.
• Remove the filter from the air purifier
(see REPLACING THE FILTER on page 11)
and take it out of the plastic bag. Then
re-insert the filter into the air purifier.
• Select a flat and level location for the
air purifier.
• For proper air flow, locate the unit at least
20cm from any wall or furniture.
• Ensure the air inlet and outlets are not
blocked before use.
• Ensure the filter has been fitted correctly as
per the instructions in this book.
• Plug the adaptor into a 230V–240V power
outlet and connect to the adaptor inlet of the
air purifier. Turn on the power outlet.
IMPORTANT
When moving the air purifier, always lift the
unit using two hands and set down gently on
a flat and level surface.
IMPORTANT
Do not use any other AC adapter other than
the one provided with the unit.

9
Functions
OPERATING YOUR AIR PURIFIER
1. Press the POWER button to turn on
and the POWER symbol light will
illuminate.
2. The air purifier will begin operation.
3. The air purifier will begin operation in the
last setting selected, including Night mode
and timer.
4. To adjust how the air purifier operates, follow
the directions below.
NOTE
The filter reset light will illuminate red
indicating that the filter needs to be replaced.
To reset the indicator after the filter has been
replaced, press and hold the POWER
button for 5 seconds and the filter reset light will
turn off.
Microbe ShieldTM/NIGHT MODE
The Microbe ShieldTM and Night Modes utilise
the same button on the control panel. Pressing
the Microbe ShieldTM/NIGHT button will
cycle through these two settings.
Microbe ShieldTM
• Press the Microbe ShieldTM/NIGHT mode
button until the Microbe ShieldTM indicator
light illuminates to turn it on.
• Press the button repeatedly until the light
extinguishes to turn off this function.
Night Mode
• To turn on Night Mode, press the Microbe
ShieldTM/NIGHT button until the Night
indicator light starts to blink.
• After 10 blinks, all indicator lights on
the control panel will turn off as the unit
enters night mode and the fan speed will
automatically change to Low.
• Press any button on the control panel to
re-engage the control panel and turn off
night mode. The Night indicator light will
extinguish.
FAN SPEED/TURBO MODE
NOTE
The air purifier will resume in the last
programmed setting once it has been turned
off, even if turned off at the power outlet. If the
last programmed setting was Night mode, once
turned on, the control panel will illuminate
with the Night indicator light blinking as a
reminder that Night mode has been set.
• Press the FAN SPEED button repeatedly
until the desired speed is illuminated on the
control panel.
• There are 4 fan speeds: Low, Medium, High
and Turbo.
• The purifier has reached Turbo mode when
all three lights are illuminated on the control
panel at the same time.
NOTE
When changing the fan speed, the unit may
take a few seconds to adjust.
TIMER
• The air purifier can be set to operate for
timed intervals of 2 hours, 4 hours and 8
hours, stopping automatically when the
selected operating time has elapsed.
• If no timer is set, the air purifier will
continuously operate until the unit is
manually switched off.
• Press the TIMER button repeatedly until
the desired interval hours are illuminated on
the control panel.
• For continuous operation, press the
TIMER button repeatedly until there are no
lights illuminated under the timer intervals.

10
FILTER RESET
• The filter reset light will illuminate red
indicating that the filter needs to be replaced.
• Replace the filter according to the directions
found under Replacing the Filter in this book.
• Once the filter is replaced, press and hold the
POWER button for 5 seconds to reset the
Filter Reset light.
• The built-in timer for the filter reset is 4,320
operating hours.
NOTE
For best performance, the filter should be
cleaned at least monthly as per the instructions
found in the Care, Cleaning & Storage section
of this book.
Care, Cleaning
& Storage
The air purifier and filter should be cleaned at
least once every month. Ensure the air purifier
is switched off and disconnected from the power
outlet and allow all parts to cool before cleaning
or storing.
• Use a clean, dry cloth to clean all external
surfaces of the air purifier.
NOTE
More frequent cleaning may be required
depending on environmental conditions.
BREVILLE RECOMMENDS
• Always ensure the air purifier is turned off,
switched off at the power outlet and unplugged
and allow the unit to cool before performing
any cleaning or filter replacement.
 DO NOT stick any foreign objects or your
fingers inside the air inlet/outlet of this unit.
 DO NOT use gasoline, benzine, thinner,
harsh cleaners, etc. on and/or in the unit
while cleaning as they will damage the unit.
 NEVER use alcohol or other solvents
on this unit.
FILTER CLEANING AND REPLACING
WARNING
The filter is not washable. Do not immerse any
part of the air purifier in water as it will cause
damage.
• The Pre-filter should be cleaned at least once
every month using a vacuum cleaner. Gently
vacuum using a hand-tool attachment such as
a brush or upholstery tool. Clean more often if
required.
• Do not use any solutions, hard bristle
brushes or sharp objects to clean as this
can cause damage.
• Replace the filter as indicated using the
instructions following.

11
REPLACING THE FILTER
Your Easy AirTM Purifier filter should be
replaced in the time frames indicated below.
• The filter life is approximately 6 months
if used 24 hours daily, or 12 months if used
12 hours daily.
• The filter life may vary to this timing,
depending on environmental conditions.
• Remove all packaging from the replacement
filter and place the filter into the unit as
described below.
1. Carefully turn your air purifier upside down
and remove the locking knob from the base
of the unit.
2. Remove the base plate.
3. Remove the used filter, being careful that
any residue or debris that may fall from the
filter will not cause damage.
4. Insert the replacement filter into the unit,
ensuring that it is correctly fitted and
centred.
5. Replace the base plate and refasten the
locking knob.
6. Return the air purifier to an upright
position.
7. Turn on the air purifier then press and
hold the POWER button for 5 seconds
to reset the Filter Reset light.
NOTE
There is no top or bottom on the filter. The
filter can be placed into the unit either way.
NOTE
If the filter is not in place or not fitted correctly,
the air purifier will not operate.
WARNING
Unintended use of the air purifier or damage
to the housing may result in the escape of
dangerous UV-C radiation which is dangerous
to the eyes and skin. Never operate the UV-C
light outside of the air purifier.
UV-C LIGHT CARE
The replacement of the UV-C light must be
undertaken at an authorised Breville service
centre. Please contact Breville Customer
Service Centre for further support.
REPLACEMENT FILTERS
Replacement filters must be purchased from
the Breville website^ or at participating retail
outlets.
See the table below for the replacement
product code to suit this Breville AirPurifier.
Breville AirPurifier
Model No.
Filter Replacement
Product Code
the Easy AirTM
LAP150WHT
LAP015WHT
the Smart AirTM
LAP300WHT
LAP030WHT
the Smart Air PlusTM
LAP500WHT
LAP050WHT
^Delivery charges may apply.
Please contact Breville Customer Service
Centre for further support.
Only use the original Breville filter specially
intended for this appliance. Do not use any
other filters.

12
Troubleshooting
MINI TROUBLESHOOTING GUIDE
Before carrying out any of the following service checks, unplug the unit from the mains.
PROBLEM WHAT TO DO
Unit will not start. • Check that the power plug is connected to a power outlet
and the outlet is turned on.
• Check that air purifier is assembled correctly.
• Check that the filter is fitted correctly in place.
Insufficient air flow. • Check that the filters are clean.
• Check for any obstructions in the air inlet and/or outlet.
Excessive noise. • Check for any foreign objects that may be in contact with the fan.
• Check if the filter is clogged and ready for replacement.
• Check that the air purifier has been assembled correctly
and the locking knob has been tightened.
• Check that the unit is on a level surface.
UV-C Light not
illuminating • Contact Breville service centre for UV-C light replacement.

13
NOTE

14
NOTE

15

Australian Customers
Phone: [phone]
Web: www.breville.com
New Zealand Customers
Phone: [phone]
Web: www.breville.com
Breville Customer Service Centre
Breville, the Breville logo, Master Every Moment, Easy Air and the Microbe Shield logo
are trademarks of Breville Pty. Ltd. A.B.N. 98 000 092 928.
Copyright Breville Pty. Ltd. 2019.
Due to continued product improvement, the products illustrated/photographed in this booklet
may vary slightly from the actual product.
LAP150 ANZ B19