
8
Functions
BEFORE FIRST USE
Before first use, remove any packaging material
or promotional labels attached to your toaster.
1. Insert the power plug into a 110/120V
power outlet. The TOAST|CANCEL button
surround will illuminate white. The LED
toasting progress indicator will illuminate
from left to right, then align to the selected
browning setting (indicated by the position
of the browning control slide). The toaster
will revert to stand-by mode after 30
seconds if a button is not pressed or the
browning control slide is not adjusted.
NOTE
When using the toaster for the first time, we
suggest toasting on the maximum setting
without bread. The toaster may emit a
thin smoke or distinct odor on initial use.
This is normal and not detrimental to the
performance of the toaster.
2. Place bread, bagels, English muffins etc into
each of the toasting slots. Ensure items for
toasting are not too large or too thick to fit
in the toasting slots.
3. There are 12 browning settings ranging
from ‘1’ (lightest) to ‘5’ (darkest). Select
the desired browning setting by adjusting
the browning control slide on the front
of the toaster. The LED toasting progress
indicator will illuminate and align to the
selected browning setting (as indicated by
the position of the browning control slide).
NOTE
When toasting bread for the first time, it is
suggested to toast on browning setting '4' (9
LED's illuminated). Various types of bread and
personal preference may require a different
browning setting. For example, raisin toast
and white light-textured breads may require
a lighter setting, while heavier textured rye
breads may require a darker setting.
4. To start the toasting process, press the
TOAST|CANCEL button which will
illuminate red. The carriage will automatically
lower into the toasting slots which starts the
toasting cycle. As the carriage automatically
locks into position, the LIFT & LOOK™
button surround will illuminate white (refer
to LIFT & LOOK™ button, page 13). The
LED toasting progress indicator (above the
selected browning setting) will flash and start
to gradually count down.
NOTE
Toasting can be stopped at any time by pressing
the TOAST|CANCEL button. This will cancel
the operation and the carriage will move to the
raised position.
5. Once the toasting cycle has completed and
the carriage has risen and locked into the
raised position, the toast ready alert will
sound. Remove the toast. The LED toasting
progress indicator will re-illuminate to
the previously selected browning setting.
The TOAST|CANCEL button surround
will illuminate for up to 30 seconds before
entering stand-by mode.
NOTE
To re-activate the toaster from
stand-by mode, press any button or move the
browning control slide. The TOAST|CANCEL
button and LED toasting progress indicator will
re-illuminate.
WARNING
Do not leave the toaster unattended when in use
as toast may jam.
In the unlikely event that bread, bagels, English
muffins or toaster pastries become jammed in
the toasting slots, all the buttons and the LED
toasting progress indicator will flash and the
elements will turn off. Remove the power plug
from the power outlet and allow the toaster to
cool completely before carefully easing the bread
out of the slots. Take care not to damage the
heating elements. Do not use metal utensils.