Brickhouse Security HGDC User manual

Dual FHD 1080P Dash Camera
User’s Guide

Dual FHD 1080P Dash Camera
The Dual FHD 1080P Dash Camera has a high-resolution of 1080P with ultra
wide-angle lens of 160° degrees. The device has a pinhole external camera that
connects via the 3MM port. You can see both camera views in a split screen.
The camera supports up to 32GB of memory (not included). Built-in G-Sensor
records and protects video clips based on possible collision or impact. Record
continuously or use motion activation. Automatic power on/off option.
In the Box:
In the box you will find the Dual FHD 1080P Dash Camera, mini external
camera, USB power car lighter adapter, and this User’s Guide.

1. USB Power Port
4. Power/OK Button
7. Mounting Bracket
10. Speaker
13. 3” Display
2. Mode Key
5. Down Key
8. SD Card Slot
11. Camera Lens
3. PIR Sensor
6. Menu Key
9. Reset
12. External Camera Port

Getting Started
Before using your device we recommend you format the SD card to 32 FAT.
Please review our video tutorials for more information on formatting at
help.brickhousesecurity.com
Insert the microSD card in the SD slot (card not included) with the gold
contacts facing the camera screen.
Connect the included USB power cord to the dash camera via the USB slot.
Then plug the cable to your car lighter port. Device will automatically power on
and will be in standby mode. Upper left hand corner will show a video icon

Accessing Menu
Press the menu key. From here you will be able to select and make changes to
your dash camera.
Using the up and down key, you can change the following options; resolution,
time/date stamp, recording mode, sharpness, anti-shaking for G-sensor, and
more. When choosing the setting you will need to press the power button
gently. This is also the OK key where you can select the field and save your
settings.
Pressing the mode key will cause you to exit the menu field.

Recording Video
When camera is powered on, press the power/OK button to select record
mode, the camera ICON will appear on the upper left corner on the LCD screen.
Press OK to start recording. A red flashing dot will appear on the LCD screen
camera to indicate that the camera is now in recording mode.
To stop recording, press OK. The red flashing dot will go solid, then disappear.
The video will stop recording and the file will be saved.
Protect video files by gently pressing mode key. The lock indicator
will appear on the LCD screen. This mode will protect the recorded video file
from being deleted/overwritten.
To remove the lock, gently press the mode key again.

Photo Mode
Press the mode key to switch from video recording to photo mode. The camera
ICON will appear on the left corner on the LCD screen.
Gently press power/OK key and a photo will be taken. The LCD screen will flash
and save the photo to the SD card.
Playback Mode Video/Photo
Gently press the mode key twice and the playback Icon will appear in the upper
left hand corner.
Using the up and down key, you can select the file to playback and press OK to
review video or photos.
Press the mode button to exit playback.