Brionvega RR-226-FO-ST User manual

rr-226-fo-st english
Bluetooth
connection
Years of
Achille Castiglioni
Years of
Achille Castiglioni
Years of
Achille Castiglioni

1 2
ANTENNA
IN
AUX1 PREOUT AUX2 SUBCUFFIEDXDIFFUSORI SX
INTERRUTTORE
GENERALE
0I
0 1
ALIMENTAZIONE
230V50Hz
3
Bluetooth connection
to the radiofonografo
5
1
Control push-button panel ON
2
Volume level
3
Control push-button panel AUX 1
4
Auxiliary audio input (AUX1)
5
USB 500 mA 5V
4

Bluetooth connection
to the radiofonografo
The “ADVANCE” “WX700” device is included in the
radiofonografo packaging, which allows the transmission of
bluetooth audio in HD from any external device with bluetooth
technology.
Included in the packaging:
1. “ADVANCE” device “WX700”
2. Transformer with three standard adapters
3. USB cable
4. AUX connectors
Instructions for connecting the “WX700” device to the
radiofonografo:
1. Insert the two connectors (supplied) into the AUX1
input , located on the back of the radiofonografo.
2. Connect the “WX700” device to the connectors
previously inserted in the input AUX1.
N.B. For correct installation, the “WX700” device must be
connected in such a way that the “left” and “right” channels
correspond to the same channels in the radiophonograph.
The channels are indicated on the device (see image ).
3. Connect the “WX700” device to the transformer
supplied , or using the supplied USB cable , connect it
to the USB 5V output on the back of the radiofonografo.
4. Switch on the radiofonografo by pressing the “on” button
on the front keyboard of the radiofonografo.
5. Atthispointthe“WX700”devicewillbegintoashand
it will be possible to connect it to any external bluetooth
device.
6. Press the AUX1 button on the front keyboard of the
radiofonografo.
7. It is now possible to play music via bluetooth through
the radiofonografo. Use the “volume” knob on the
radiofonografo to raise or lower the loudness of the music.
Consult the manual supplied with the “WX700” device for
further product information.
2
4
4
1
2 3
5
1
3
2
5
1
3
4
4
5

HEADQUARTERS:
SIM2 BV International Srl
Via Udine 59
33061 Rivignano Teor (UD) - Italy
Tel. [phone]
[email protected]
www.brionvega.it
BRIONVEGA PERMANENT
SHOW ROOM:
@ MetroQuality
Via Solferino, 24
20121 Milano (MI)
Tel. [phone]
By appointment only: please call +39.388.0522627 cod. 461258100