Bristan Java Series Wiring diagram

Installation Instructions & User Guide
Installation Instructions & User GuideInstallation Instructions & User Guide
Installation Instructions & User Guide
Java Basin & Bath
Java Basin & Bath Java Basin & Bath
Java Basin & Bath Tap Range
Tap RangeTap Range
Tap Range
Please keep these instructions for future reference and request of replacement parts
Please keep these instructions for future reference and request of replacement partsPlease keep these instructions for future reference and request of replacement parts
Please keep these instructions for future reference and request of replacement parts

Thank you for choosing Bristan, the UK’s leading taps and showers expert. We have
designed this product with your enjoy ent in ind. To ensure that it works to its full
potential, it needs to be fitted correctly. These fitting instructions have been created to give
you all of the infor ation you need and, if you need any further help, please do not hesitate
to give us a call on 0844 701 6273.
I portant Safety Infor ation 03
General Specifications 03
Di ensions 04-05
Installation Require ent Notes 06
Installation 07-11
Basin & Bath Taps
07
Contents
ContentsContents
Contents
Basin & Bath Taps
07
Bath Filler 08-09
Bath Shower Mixer 10 - 11
Maintenance 12
Map of Hard Water Regions in the UK 13
Troubleshooting 14
Guarantee 15
02

Important afety Information
Important afety InformationImportant afety Information
Important afety Information
• Please read these instructions thoroughly and retain for future use.
• All products anufactured and supplied by Bristan are safe provided they are installed
correctly, used correctly and receive regular aintenance in accordance with these
instructions.
• If you are in any doubt about your ability to install this product safely you ust e ploy the
If you are in any doubt about your ability to install this product safely you ust e ploy the If you are in any doubt about your ability to install this product safely you ust e ploy the
If you are in any doubt about your ability to install this product safely you ust e ploy the
services of an experienced qualified plu ber.
services of an experienced qualified plu ber.services of an experienced qualified plu ber.
services of an experienced qualified plu ber.
• Re ove all packaging and check the co ponents for da age before starting installation.
• Before starting any installation please consider the following: Prior to drilling into walls,
check that there are no hidden electrical wires, cables or water supply pipes. This can be
checked with the aid of an electronic detector.
• If power tools are used do not forget to: - Wear eye protection
- Unplug equip ent after use
• This product ust
ust ust
ust not be odified in any way as this will invalidate the guarantee.
•
These fittings need to be installed in accordance with and eet the require ents of the Water
•
These fittings need to be installed in accordance with and eet the require ents of the Water
Supply (Water Fittings) Regulations 1999 and Scottish Byelaws 2004.
General pecifications
General pecificationsGeneral pecifications
General pecifications
Operating pressure range (bar) Min Max
Basin Taps 0.2 8.0
Bath Taps 0.2 8.0
Bath Filler 0.2 8.0
Bath Shower Mixer 0.2 8.0
Maxi u static pressure – 10.0 bar
NOTE:- No inally equal (balanced) inlet supply pressures are reco ended for opti u
Perfor ance of ixer taps.
Designed to co ply with BS EN 200 for single taps / co bination taps for water syste s of type 1
and 2 general technical specifications; and to be used within syste s designed to BS 6700.
BS 6700 reco ends the te perature of stored water should never exceed 65°C. A stored water
te perature of 60°C is considered sufficient to eet all no inal require ents and will ini ise
the build up of li e scale in hard water areas.
03

Dimensions
DimensionsDimensions
Dimensions
½" Basin Taps
½" Basin Taps½" Basin Taps
½" Basin Taps ½"
½" ½"
½" Bath Taps
Bath TapsBath Taps
Bath Taps
04
¾”
¾” ¾”
¾” Bath Taps
Bath TapsBath Taps
Bath Taps

Dimensions Cont.
Dimensions Cont.Dimensions Cont.
Dimensions Cont.
Bath Shower Mixer
Bath Shower MixerBath Shower Mixer
Bath Shower Mixer
05
Bath
BathBath
Bath Filler
FillerFiller
Filler

Installation Requirements
Installation RequirementsInstallation Requirements
Installation Requirements
IMPORTANT
IMPORTANT IMPORTANT
IMPORTANT -
--
- PLEASE READ
PLEASE READPLEASE READ
PLEASE READ
This/these fitting/fittings needs/need to be installed in accordance with the following Installation
This/these fitting/fittings needs/need to be installed in accordance with the following Installation This/these fitting/fittings needs/need to be installed in accordance with the following Installation
This/these fitting/fittings needs/need to be installed in accordance with the following Installation
Require ents and Notes (IRN) to ensure they eet the require ents of the Water Supply (Water
Require ents and Notes (IRN) to ensure they eet the require ents of the Water Supply (Water Require ents and Notes (IRN) to ensure they eet the require ents of the Water Supply (Water
Require ents and Notes (IRN) to ensure they eet the require ents of the Water Supply (Water
Fittings) Regulations 1999 and the Scottish Byelaws 2004.
Fittings) Regulations 1999 and the Scottish Byelaws 2004.Fittings) Regulations 1999 and the Scottish Byelaws 2004.
Fittings) Regulations 1999 and the Scottish Byelaws 2004.
IRN
IRN IRN
IRN R001: J ½ C, J ¾ C, J BF C, J BSM C
R001: J ½ C, J ¾ C, J BF C, J BSM CR001: J ½ C, J ¾ C, J BF C, J BSM C
R001: J ½ C, J ¾ C, J BF C, J BSM C
See text of entry for Installation Require ents or Notes.
IRN
IRN IRN
IRN R005: J ½ C, J ¾ C, J BF C
R005: J ½ C, J ¾ C, J BF CR005: J ½ C, J ¾ C, J BF C
R005: J ½ C, J ¾ C, J BF C
This tap or co bination tap asse bly has a Type AUK2 air gap and is therefore only suitable for
installation in do estic pre ises or in other pre ises to protect against a backflow risk up to a Fluid
Category 3, unless additional backflow protection for the higher risk is included in the installation.
IRN R010
IRN R010 IRN R010
IRN R010 -
--
- Schedule 2
Schedule 2Schedule 2
Schedule 2-
--
-15 (1
15 (115 (1
15 (1): J BF C, J BSM C
): J BF C, J BSM C): J BF C, J BSM C
): J BF C, J BSM C
Water supplies shall be a reasonably balanced pressures fro a co on source (e.g. hot and cold
supplies both fro the sa e storage or both fro a supply pipe). Where the fitting is supplied fro
unbalanced supplies (e.g. hot and cold supplies fro separate sources) a ‘Listed’ single check valve
‘Listed’ single check valve‘Listed’ single check valve
‘Listed’ single check valve or
so e other no less effective backflow prevention device shall be fitted i ediately upstrea of both
hot and cold water inlets.
IRN
IRN IRN
IRN
R040
R040 R040
R040
-
--
-
Schedule
Schedule Schedule
Schedule
2
22
2
-
--
-
15 (1
15 (115 (1
15 (1
): J BSM C
): J BSM C): J BSM C
): J BSM C
06
1.
Size of tap or co bination fitting.
2.
Vertical distance of outlet above spill-over level.
1. Not exceeding 1/2 in 20
2. Exceeding 1/2 in but not exceeding 3/4 in 25
3. Exceeding 3/4 in 70
IRN
IRN IRN
IRN
R040
R040 R040
R040
-
--
-
Schedule
Schedule Schedule
Schedule
2
22
2
-
--
-
15 (1
15 (115 (1
15 (1
): J BSM C
): J BSM C): J BSM C
): J BSM C
The fitting shall be installed so that its outlet discharges above the spill-over level of any fixed appliance
as indicated below:-
For backflow protection in do estic or installations up to, and including, Fluid Category 3.
For backflow protection in do estic or installations up to, and including, Fluid Category 3.For backflow protection in do estic or installations up to, and including, Fluid Category 3.
For backflow protection in do estic or installations up to, and including, Fluid Category 3.
If the fitting cannot be installed as indicated in the table it shall be installed:
a) with an approved double check valve asse bly or so e other no less effective backflow prevention
device i ediately upstrea of the inlet; or
b) so that it draws water by gravity only fro a cistern, or cylinder having a per anently open
vent pipe, and the distributing pipe supplies no other fitting (other than draining tap) at a lower level.
For
For For
For backflow protection in pre ises or installations up to, and including Fluid Category 5.
backflow protection in pre ises or installations up to, and including Fluid Category 5.backflow protection in pre ises or installations up to, and including Fluid Category 5.
backflow protection in pre ises or installations up to, and including Fluid Category 5.
The vertical distance of the outlet above the spill-over level shall be not less than 20 or twice the
dia eter of the inlet pipe to the fitting, which ever is the greater. If the fitting cannot be installed as
indicated it shall be installed with a backflow prevention arrange ent suitable for the Fluid Category.

Installation
InstallationInstallation
Installation
½" Basin & ¾" Bath Taps
½" Basin & ¾" Bath Taps½" Basin & ¾" Bath Taps
½" Basin & ¾" Bath Taps
1. Identify all co ponents are present prior to starting installation.
2. Slide the plinth (8) and O-Ring (9) onto the threaded tail and install the taps to the basin.
3. Using the washer (10) and backnuts (11) secure the taps to the basin by tightening the
backnuts onto the threaded tails. A suitable spanner (not supplied) ay be required to
fully tighten the backnuts (11).
4. Connect the hot and cold water supplies to the taps.
5. Turn on the water supplies and open both taps letting the
water flow for a few inutes to check all joints and
connections for any leaks. 2
1. Handle x2
2.
Indice
x2
3
1
4
2.
Indice
x2
3. Grub Screw x2
4. Spline Adapter x2
5. Valve x2
6. Tap Body x2
7. Anti-Splash Asse bly x2
8. Plinth x2
9. O-Ring x2
10. Washer x2
11. Backnut x2 7
07
5
6
8
9
10
11

Installation cont
Installation contInstallation cont
Installation cont.
..
.
Bath Filler
Bath FillerBath Filler
Bath Filler
1. Identify all co ponents are present prior to starting installation.
2. Slide the base washer (8) onto the threaded tail of the tap and install the ixer body (6) to
the bath.
3. Using the washers (9) and backnuts (10), secure the ixer body (6) to the bath by
tightening the backnuts (10) onto the threaded tails. A suitable spanner (not supplied)
aybe needed to fully tighten the backnuts (10).
4. Connect the hot and cold water supplies using ¾" tap connectors (not supplied).
5. Turn the handles in both directions, letting the water flow for a few
inutes to check all joints and connections for leaks.
1. Handle x2 6. Mixer Body x1
2. Indice x2 7. Anti Splash Asse bly x1
3. Grub Screw x2 8. Base Washer x1
4.
Spline
Adapter
x2
9.
Washer
x2
4.
Spline
Adapter
x2
9.
Washer
x2
5. Valve x2 10. Backnut x2
08

1
2
3
4
5
6
Installation cont
Installation contInstallation cont
Installation cont.
..
.
Bath Filler
Bath FillerBath Filler
Bath Filler
9
6
7
8
09
10

Installation cont
Installation contInstallation cont
Installation cont.
..
.
Bath Shower Mixer
Bath Shower MixerBath Shower Mixer
Bath Shower Mixer
1. Identify all co ponents are present prior to starting installation using the diagra
overleaf.
2. Slide the base washer (15) onto the threaded tails of the tap body and install the ixer
body (6) to the bath.
3. Using washers (8) and the backnuts (9) secure the ixer body (6) to the bath by
tightening the backnuts (9) onto the threaded tails. A suitable spanner (not supplied)
ay be required to fully tighten the backnuts (9).
4. Connect the hot and cold water supplies using ¾" tap connectors (not supplied).
5. Fit the shower hose (10) to the hose outlet using the s all washer, and the handset (11)
to the hose using the s all washer.
6. Fit the wall bracket (12) to the wall using the fixings supplied, ensuring the handset (11)
and hose (10) reaches it co fortably.
7. Turn the handles in both directions, letting the water flow for a few inutes to check all
joints and connections for leaks.
joints and connections for leaks.
8. To switch fro bath to shower ode, si ply pull the diverter up. After use the ixer
auto atically reverts to the bath filling ode.
NOTE
NOTENOTE
NOTE: The ixer incorporates a ‘lock-up’ diverter feature, for use with low pressure
water syste s. Si ply twist the diverter knob when in the up position to lock in the
shower ode. After use twist back to allow diverter knob to drop back down to bath
filler ode
1. Handle x2 9. Backnut x2
2. Indice x2 10. Shower Hose x1
3. Grub Screw x2 11. Handset x1
4. Spline Adapter x2 12. Wall Bracket x1
5. Valve x2 13. Diverter Asse bly x1
6. Mixer Body x2 14. Hose Outlet x1
7. Anti-Splash Asse bly x2 15. Base Washer x1
8. Washer x2
10

Installation cont
Installation contInstallation cont
Installation cont.
..
.
Bath
Bath Bath
Bath Shower Mixer
Shower MixerShower Mixer
Shower Mixer
1
2
3
4
5
11
12
13
14
11
9
6
7
8
11
10
15

General Cleaning
General CleaningGeneral Cleaning
General Cleaning
Your fitting has a high quality finish and
should be treated with care to preserve
the visible surfaces. All finishes will
wear if not cleaned correctly. The only
safe way to clean your product is to wipe
with a soft da p cloth. Stains can be
re oved using washing up liquid. All
bathroo cleaning products (powders
and liquids) will da age the surface of
your fitting, even the non-scratch
cleaners.
Note:
Note:Note:
Note: Never use abrasive detergents or
disinfectants or those containing
alcohol, hydrochloric acid or phosphoric
acid.
Bristan reco end E-
cloth for cleaning all of
Maintenance
MaintenanceMaintenance
Maintenance
Tip
TipTip
Tip:
: :
: If the showerhead is heavily scaled or
has not be aintained for a long period of
ti e a solution of hot water and white vinegar
ay be needed to clear the scale.
Mix a 50/50 solution and rub the nozzles
thoroughly with the solution aking sure the
solution gets into all of the nozzles.
Wash off the solution with clean water.
cloth for cleaning all of
our bathroo & kitchen
products. Using just
water, E-cloth gives a
s ear free, deep clean by breaking up
and holding dirt, which nor al cloths
leave behind. Order through your Bristan
stockist (order code: ECLOTH).
Cleaning the Showerhead
Cleaning the Showerhead Cleaning the Showerhead
Cleaning the Showerhead –
––
– J BSM
J BSM J BSM
J BSM C
CC
C
Your Bristan showerhead has rub-clean
nozzles for easy cleaning. Si ply rub
your fingers across the rubber spray jets
regularly and before you turn the shower
on to re ove any scale or debris.
The hardness of the water in your area
will deter ine how often you should
clean your showerhead. Build up of scale
in particularly hard water areas
co bined with constant use eans you
ay need to clean your showerhead once
a week. To ensure continued
perfor ance the showerhead needs to be
regularly descaled.
12

Maintenance cont.
Maintenance cont.Maintenance cont.
Maintenance cont.
We advise that your fitting is regularly
serviced in hard water areas to aintain
opti u perfor ance (see ap of Hard
Water Regions in the UK on page 17.
If your fitting begins to leak the following
should be carried out;
Isolate both hot and cold water supplies to
the tap by either:
•Turning the water supply off at the ains
stopcock or
•Turning off the isolation valves to the tap.
Cleaning the Valves
Cleaning the Valves Cleaning the Valves
Cleaning the Valves –
––
– Basin Taps, Bath Tap, Bath Filler and Bath Shower Mixer
Basin Taps, Bath Tap, Bath Filler and Bath Shower MixerBasin Taps, Bath Tap, Bath Filler and Bath Shower Mixer
Basin Taps, Bath Tap, Bath Filler and Bath Shower Mixer
8. Turn on water supply and check for leaks.
11. Contact our helpline should if proble
persists.
Handle
Cap
Grub
Screw
Spline
Adapter
1. Re ove the cap fro the underside of the
lever to reveal the concealed grub screw.
2. Unscrew the grub screw and pull the
handle upwards fro the valve & Spline
adapter.
3. Using a suitable spanner re ove the valve
fro the tap body.
4. Clean the valve and the seating inside the
tap body.
5. If necessary replace the valve.
Please visit www.bristan.co /sparesfinder in
order to find spare parts for this product.
6. Replace the valve into the tap body and
tighten fully using a suitable spanner.
7. Replace handle asse bly.
Valve
Tap Body
13
Anti-Splash

Sy pto
Sy ptoSy pto
Sy pto Cause
CauseCause
Cause Re edy
Re edyRe edy
Re edy
No flow or poor flow
rate.
Partially closed stop or service
valve in water supply pipework to
the tap.
Open stop or service valve.
Head of water is below the
ini u distance required.
Refer to the Specification section
for ini u pressures required.
Possible airlock / blockage in
supply pipework
Re ove water supplies fro the
fitting and flush the syste to
re ove any airlocks / debris.
Cartridge / Valve not opening
fully.
Service fitting. Refer to
aintenance section on page 12-
13.
Water dripping for a few
seconds after the tap
has been turned off.
This is caused by ‘capillary
action’ and residual water in the
spout being siphoned out. This
should only last for a couple of
seconds.
Troubleshooting
TroubleshootingTroubleshooting
Troubleshooting
seconds.
Constant dripping /
leaking when the tap is
not in use.
Cartridge / Valve not fully
shutting off.
Service fitting and replace
cartridge / valve. Refer to
aintenance section on page 12-
13.
Fitting does not turn on. Water supplies not turned on. Check that the water supplies to
the fitting are turned on.
Closed stop or service valve. Open stop or service valve.
Water does not co e
out of the showerhead
when using the bath
shower ixer.
Diverter echanis not fully
open.
Open the diverter echanis
fully by pulling the diverter knob
up.
Insufficient water pressure /
header height.
Refer to the specification section
for ini u pressures required.
14

Bristan
BristanBristan
Bristan Guarantee
GuaranteeGuarantee
Guarantee
Bristan offers solid guarantees to provide you with co plete peace of ind.
Taps and Mixers
Taps and MixersTaps and Mixers
Taps and Mixers
5 year parts and 1 year labour*. Gold, painted and special finishes 3 years parts only.
All subject to proof of purchase.
Mixer Shower Valves
Mixer Shower ValvesMixer Shower Valves
Mixer Shower Valves
5 year parts. 5 year labour* (subject to registration), or 1 year with proof of purchase.
Gold, painted and special finishes 3 years parts only.
Pu ps and Power Showers
Pu ps and Power Showers Pu ps and Power Showers
Pu ps and Power Showers
2 year parts. 1 year labour* (subject to registration).
Electric Showers/Instantaneous Water Heaters
Electric Showers/Instantaneous Water HeatersElectric Showers/Instantaneous Water Heaters
Electric Showers/Instantaneous Water Heaters
2 year parts. 1 year labour* (subject to registration).
Accessories
AccessoriesAccessories
Accessories
5 year parts only. Includes bathroo s accessories, shower accessories (e.g. hoses, handsets and poles), wastes,
WC levers and light pulls. Gold, painted and special finishes 3 years parts only.
Sanitaryware
SanitarywareSanitaryware
Sanitaryware
5 year parts only. Subject to proof of purchase.
*Labour provided by an approved Bristan engineer. Guarantee only applies to products with a anufacturing fault.
A deferred pay ent will be necessary in order to secure any visits by our engineers which will be charged if the
proble is found not
notnot
not to be a anufacturing fault. If the fault is found to be down to a anufacturing error, the
pay ent will be released and not charged.
This guarantee applies to products purchased within the United Kingdo or Republic of Ireland, but does not apply
to products used co ercially.
to products used co ercially.
The guarantee is only available to original purchasers who have proof of purchase.
The installation ust allow ready access to all products for the purpose of inspection, aintenance or
replace ent.
Any part found to be defective during the above guarantee period will be replaced without charge, providing that the
product has been installed in accordance with the instructions, used as intended, and regularly serviced.
Servicing should be carried out at regular intervals of no ore than 12 onths and ore frequently in hard water
areas (heavy li e scale) areas.
In the unlikely event that any proble s are encountered with the product’s perfor ance on installation, you ust
obtain guidance/authorisation fro our Custo er Service Depart ent, and be able to supply proof and date of
purchase, before any re edial action is taken.
The guarantee excludes general wear and tear and da age caused by accident, isuse or neglect, and does not
cover the following:
. Co ponents that are subject to general wear and tear such as filters, seals, ‘O’ rings and washers etc.
· Da age caused by faulty installation
· Da age caused by li e scale or any waterborne debris
· Da age caused by inappropriate cleaning products (see user instructions)
· Da age caused by the use of non-Bristan parts
· The product being used for a purpose other than intended by the anufacturer.
In the interests of continuous product i prove ent Bristan reserves the right to alter specification as necessary.
15

This booklet covers product codes
J ½ C
J ¾ C
J BF C
J B M C
Helpline
HelplineHelpline
Helpline
0844 701 6273
0844 701 62730844 701 6273
0844 701 6273
FI (JAVARANGE) – REV. D2
0844 701 6273
0844 701 62730844 701 6273
0844 701 6273
Bristan Group Limited
Birch Coppice Business Park, Dordon, Tamworth, taffordshire B78 1 G
A Masco Company
Website: www.bristan.com
Telephone: [phone] Facsimile: 0844 701 6275
Email: [e-mail]