Bristan Pear PEA PULLSNK C Wiring diagram

Installation Instructions & User Guide
Installation Instructions & User GuideInstallation Instructions & User Guide
Installation Instructions & User Guide
Pear Kitchen Sink Tap
Pear Kitchen Sink TapPear Kitchen Sink Tap
Pear Kitchen Sink Tap
Please keep these instructions for future reference and request of replacement parts
Please keep these instructions for future reference and request of replacement partsPlease keep these instructions for future reference and request of replacement parts
Please keep these instructions for future reference and request of replacement parts

Thank you for choosing Bristan, the UK’s leading taps and showers expert. We have
designed this product with your enjoy ent in ind. To ensure that it works to its full
potential, it needs to be fitted correctly. These fitting instructions have been created to give
you all of the infor ation you need and, if you need any further help, please do not hesitate
to give us a call on 0844 701 6273.
I portant Safety Infor ation 03
General Specifications 03
Di ensions 04
Installation Require ents 05
Installation 06-08
Maintenance
09
Contents
ContentsContents
Contents
Maintenance
09
Troubleshooting 10
Guarantee 11
02

Important Safety Information
Important Safety InformationImportant Safety Information
Important Safety Information
• Please read these instructions thoroughly and retain for future use.
• All products anufactured and supplied by Bristan are safe provided they are installed
correctly, used correctly and receive regular aintenance in accordance with these
instructions.
• If you are in any doubt about your ability to install this product safely you ust e ploy the
If you are in any doubt about your ability to install this product safely you ust e ploy the If you are in any doubt about your ability to install this product safely you ust e ploy the
If you are in any doubt about your ability to install this product safely you ust e ploy the
services of an experienced qualified plu ber.
services of an experienced qualified plu ber.services of an experienced qualified plu ber.
services of an experienced qualified plu ber.
• Re ove all packaging and check the co ponents for da age before starting installation.
• Before starting any installation please consider the following: Prior to drilling into walls,
check that there are no hidden electrical wires, cables or water supply pipes. This can be
checked with the aid of an electronic detector.
• If power tools are used do not forget to:
- Wear eye protection
- Unplug equip ent after use
•
This product
ust
ust ust
ust
not be odified in any way as this will invalidate the guarantee.
•
This product
ust
ust ust
ust
not be odified in any way as this will invalidate the guarantee.
• These fittings need to be installed in accordance with and eet the require ents of the Water
Supply (Water Fittings) Regulations 1999 and Scottish Byelaws 2004.
General Specifications
General SpecificationsGeneral Specifications
General Specifications
Operating pressure range (bar) Min Max
1.0 8.0
Maxi u static pressure – 10.0 bar
NOTE:
NOTE:NOTE:
NOTE:-
--
- No inally equal (balanced) inlet supply pressures are reco ended for opti u
Perfor ance of ixer taps.
BS 6700 reco ends the te perature of stored water should never exceed 65°C. A stored water
te perature of 60°C is considered sufficient to eet all no inal require ents and will ini ise
the build up of li e scale in hard water areas.
03

Dimensions
DimensionsDimensions
Dimensions
04

Installation Requirements
Installation RequirementsInstallation Requirements
Installation Requirements
This fitting needs to be installed in accordance with the following Installation Require ents
and Notes (IRN) to ensure they eet the require ents of the Water Supply (Water Fittings)
Regulations 1999 and the Scottish Byelaws 2004. For further details contact your Local Water
Authority.
For
ForFor
For backflow protection in pre ises or installations up to fluid category 5.
backflow protection in pre ises or installations up to fluid category 5. backflow protection in pre ises or installations up to fluid category 5.
backflow protection in pre ises or installations up to fluid category 5.
The vertical distance of the outlet above the spill-over level shall be not less than 20 or
twice the dia eter of the inlet pipe to the fitting, whichever is the greater. If the fitting cannot
be installed as indicated it shall be installed:-
a) With a backflow prevention arrange ent suitable for the Fluid Category or
b) So that it draws water by gravity only fro a cistern, cylinder or tank having a
per anently open vent pipe, the vertical distance between the point at which the pipe
or pipes supply water to the fittings is or are connected to the supply and the spill-
over level of any fixed appliances is not less than the di ensions stated above, and the
vent pipe or pipes supply(ies) no other fittings (other than a draining tap) at a lower
level.
It is essential that all pipe work is flushed through to re ove debris and swarf that could
otherwise da age the fitting. Once the pipe work has been flushed through, turn off the water
otherwise da age the fitting. Once the pipe work has been flushed through, turn off the water
supply at the stop valve.
I portant:
I portant:I portant:
I portant: Independent stop valves co plying with the current water regulations should be
fitted as a eans of isolating both water supplies to the fitting for servicing and/or
aintenance work.
05

Installation
InstallationInstallation
Installation
1.
1. 1.
1. Identify all co ponents are present prior to starting installation using the diagra overleaf.
1. Handle x1 12. O-Ring x1
2. Grub Screw Cap x1 13. Rubber ‘C’ Shaped Washer x1
3. Grub Screw x1 14. Metal ‘C’ Shaped Washer x1
4. Shroud x1 15. Fixing Studs x2
5. Cartridge Retaining Nut x1 16. Pull Out Hose Weight x1
6. Cartridge X1 17. Pull Out Hose x1
7. Internal Housing x1 18. Flexi Tails x2
8. Seal x1 19. Pull Out Hose Connector x1
9. Mixer Body x1 20. Handset Connection x1
10. Rubber Washer x1 21. Non Return Valve x1
11. Plinth x1 22 Handset x1
2.
2.2.
2. The pull-out handset (22) with an integral non-return valve (21) is pre-fitted to pull-out hose
(17) and ixer body (9).
(17) and ixer body (9).
3.
3.3.
3. Screw locating studs (15) into base of ixer tap with fixing nuts re oved.
4.
4.4.
4. Carefully screw the short pull out hose connector (19) into centre hole on the underside of
the ixer body (9) as tight as possible by hand only (DO NOT OVERTIGHTEN).
5.
5.5.
5. Carefully screw both inlet flexible connecting pipes (18) into the two outer holes on the
underside of the ixer body (9) as tight as possible by hand only (DO NOT OVERTIGHTEN).
Please note:
Please note:Please note:
Please note: It ay be necessary (depending on size of hole in sink/work surface) to only fit
one flexible connecting pipe to the ixer prior to fitting the ixer in order to feed all flexible
connecting pipes and fixings through the hole and then fit the second flexible connecting pipe
fro underneath after fitting the ixer.
6.
6.6.
6. Fit the ixer base with O-ring (12) between base (11) and the top of the sink/work surface
and fit the C-shaped rubber washer (13) and C-shaped etal washer (14) to the fixing studs
(15) under the sink/work surface and replace and tighten fully both fixing nuts aking sure
ixer is securely fastened in place with operating handle pointing in the desired position.
7.
7.7.
7. Connect s all end of pull out hose (17) using sealing washer provided to end of pull-out
hose connector (19) already fitted in base of ixer and tighten fully.
8.
8.8.
8. Split the two halves of the black hose weight (16) by re oving wire spring clip and place
both halves around a vertical section of black hose (17) under the fitted ixer so that it is
pulling the pull-out handset back into the ixer body (9) spout and replace wire spring clip.
06

Installation Cont
Installation ContInstallation Cont
Installation Cont
9.
9.9.
9. Connect both inlet flexi connecting pipes (18) to the hot and cold water supplies/household
pipe work. (The cold inlet pipe under the ixer should be on the right and hot on the left when
viewed fro the front).
Flexible Connecting Tails:
Flexible Connecting Tails:Flexible Connecting Tails:
Flexible Connecting Tails:
Care ust be taken when connecting the
flexible connection pipes to the household
pipework to ensure they do not bend sharply
and kink or twist.
See below for reco ended ways to fit
the flexible connecting pipes
10.
10.10.
10. Carefully turn on both water supplies and gently turn on ixer by lifting the lever to the
fully on position and let run for a few inutes checking all joints and connections for leaks.
Important:
Important: Important:
Important: Failure to follow these guidelines ay result in poor perfor ance and
da age to the flexible connecting pipes
Operation
OperationOperation
Operation
Moving the lever upwards/downwards fro the ixer body will turn on/off and
increase/decrease the flow of water.
Moving the lever either to the left or right when in the up position (when the ixer is viewed
fro the front) will increase/decrease the water te perature.
The pull out handset incorporates a push button enabling the water flow to be altered fro
an inner water strea to a wider outer spray pattern.
07

23
1
22
21
20
8
7
6
5
4
Installation cont
Installation contInstallation cont
Installation cont.
..
.
Basin Mixer
Basin MixerBasin Mixer
Basin Mixer
18 19
17
16
15
14
13
12
11
10
9
8
06

General Cleaning
General CleaningGeneral Cleaning
General Cleaning
Your fitting has a high quality finish and should be treated with care to preserve the visible
surfaces. All finishes will wear if not cleaned correctly. The only safe way to clean your
product is to wipe with a soft da p cloth. Stains can be re oved using washing up liquid.
All bathroo cleaning products (powders and liquids) will da age the surface of your
fitting, even the non-scratch cleaners.
Note:
Note:Note:
Note: Never use abrasive detergents or disinfectants or those containing alcohol,
hydrochloric acid or phosphoric acid.
Bristan reco end E-cloth for cleaning all of our bathroo & kitchen
products. Using just water, E-cloth gives a s ear free, deep clean by
breaking up and holding dirt, which nor al cloths leave behind. Order
through your Bristan stockist. (order code: ECLOTH).
Maintenance
MaintenanceMaintenance
Maintenance
If your fitting begins to leak the following should be carried out;
Isolate both hot and cold water supplies to the tap by either:
•Turning the water supply off at the ains stopcock or
•Turning off the isolation valves to the tap.
1. Re ove the cap (2) underneath the lever of the handle (1) to reveal the grub screw (3).
2. Unscrew the grub screw (3) and re ove the handle (1) by pulling away fro the shroud (4).
3. Unscrew the shroud (4) and re ove the cartridge retaining nut (5). Pull out the cartridge (6).
4. Carefully clean the cartridge seals and seating on the base of the cartridge (6).
5. If necessary replace the cartridge.
Please visit www.bristan.co /sparesfinder
www.bristan.co /sparesfinderwww.bristan.co /sparesfinder
www.bristan.co /sparesfinder in order to find spare parts for this product.
6. Replace the cartridge into the tap body (9) and tighten retaining nut (5) fully.
7. Replace all re aining co ponents and turn on water supply.
8. Check for leaks and contact our helpline if proble persists.
09

Sy pto
Sy ptoSy pto
Sy pto Cause
CauseCause
Cause Re edy
Re edyRe edy
Re edy
No flow or poor flow
rate.
Partially closed stop or service
valve in water supply pipework to
the tap.
Open stop or service valve.
Head of water is below the
ini u distance required.
Refer to the Specification section
for ini u pressures required.
Possible airlock / blockage in
supply pipework
Re ove water supplies fro the
fitting and flush the syste to
re ove any airlocks / debris.
Cartridge / Valve not opening
fully.
Service fitting. Refer to
aintenance section on page 09
Water dripping for a few
seconds after the tap
has been turned off.
This is caused by ‘capillary
action’ and residual water in the
spout being siphoned out. This
should only last for a couple of
seconds.
Troubleshooting
TroubleshootingTroubleshooting
Troubleshooting
Constant dripping /
leaking when the tap is
not in use.
Cartridge / Valve not fully
shutting off.
Service fitting and replace
cartridge / valve. Refer to
aintenance section on page 09
Fitting does not turn on. Water supplies not turned on. Check that the water supplies to
the fitting are turned on.
Closed stop or service valve. Open stop or service valve.
10

Bristan
BristanBristan
Bristan Guarantee
GuaranteeGuarantee
Guarantee
Bristan offers solid guarantees to provide you with co plete peace of ind.
Taps and Mixers
Taps and MixersTaps and Mixers
Taps and Mixers
5 year parts and 1 year labour*. Gold, painted and special finishes 3 years parts only.
All subject to proof of purchase.
Mixer Shower Valves
Mixer Shower ValvesMixer Shower Valves
Mixer Shower Valves
5 year parts. 5 year labour* (subject to registration), or 1 year with proof of purchase.
Gold, painted and special finishes 3 years parts only.
Pu ps and Power Showers
Pu ps and Power Showers Pu ps and Power Showers
Pu ps and Power Showers
2 year parts. 1 year labour* (subject to registration).
Electric Showers/Instantaneous Water Heaters
Electric Showers/Instantaneous Water HeatersElectric Showers/Instantaneous Water Heaters
Electric Showers/Instantaneous Water Heaters
2 year parts. 1 year labour* (subject to registration).
Accessories
AccessoriesAccessories
Accessories
5 year parts only. Includes bathroo s accessories, shower accessories (e.g. hoses, handsets and poles), wastes,
WC levers and light pulls. Gold, painted and special finishes 3 years parts only.
Sanitaryware
SanitarywareSanitaryware
Sanitaryware
5 year parts only. Subject to proof of purchase.
*Labour provided by an approved Bristan engineer. Guarantee only applies to products with a anufacturing fault.
A deferred pay ent will be necessary in order to secure any visits by our engineers which will be charged if the
proble is found not
notnot
not to be a anufacturing fault. If the fault is found to be down to a anufacturing error, the
pay ent will be released and not charged.
This guarantee applies to products purchased within the United Kingdo or Republic of Ireland, but does not apply
to products used co ercially.
to products used co ercially.
The guarantee is only available to original purchasers who have proof of purchase.
The installation ust allow ready access to all products for the purpose of inspection, aintenance or
replace ent.
Any part found to be defective during the above guarantee period will be replaced without charge, providing that the
product has been installed in accordance with the instructions, used as intended, and regularly serviced.
Servicing should be carried out at regular intervals of no ore than 12 onths and ore frequently in hard water
areas (heavy li e scale) areas.
In the unlikely event that any proble s are encountered with the product’s perfor ance on installation, you ust
obtain guidance/authorisation fro our Custo er Service Depart ent, and be able to supply proof and date of
purchase, before any re edial action is taken.
The guarantee excludes general wear and tear and da age caused by accident, isuse or neglect, and does not
cover the following:
. Co ponents that are subject to general wear and tear such as filters, seals, ‘O’ rings and washers etc.
· Da age caused by faulty installation
· Da age caused by li e scale or any waterborne debris
· Da age caused by inappropriate cleaning products (see user instructions)
· Da age caused by the use of non-Bristan parts
· The product being used for a purpose other than intended by the anufacturer.
In the interests of continuous product i prove ent Bristan reserves the right to alter specification as necessary.
11

This booklet covers product code:
PEA PULLSNK C
Helpline
HelplineHelpline
Helpline
0844 701 6273
0844 701 62730844 701 6273
0844 701 6273
FI (PEA PULLSNK C) – REV D2
0844 701 6273
0844 701 62730844 701 6273
0844 701 6273
Bristan Group Limited
Birch Coppice Business Park, Dordon, Tamworth, Staffordshire B78 1SG
A Masco Company
Website: www bristan com
Telephone: [phone] Facsimile: 0844 701 6275
Email: enquire@bristan com