Brita 3-Way Water Filter Dispenser System User manual

3-Way Water Filter Dispenser
Instructions for use | Mode d‘emploi | Manual de instrucciones
Instruções de utilização | Gebrauchsanleitung
Istruzioni per l‘uso | Instrukcja obsługi | Gebruiksaanwijzing
er
cci
o
w
ijz
o
nes
ing

ENGLISH 1
Next to hot and cold unfiltered water, your
BRITA system offers many advantages
BRITA water
• improves the taste of hot and cold drinks
• is economical and convenient
• prolongs domestic appliance life by preventing limescale
build-up
• is ideal for cooking healthy food
• gives full flavour and better tasting tea and coffee
The BRITA 3-Way Water Filter Dispenser has two levers. One for
your standard hot and cold unfiltered water and a BRITA branded
lever for the BRITA filtered water.
The P 1000 filter cartridge is the key to cleaner,
clearer great tasting BRITA filtered water from
the BRITA 3-Way Water Filter Dispenser!
The P 1000 has a constant filtration performance for limescale
reduction thanks to its multilevel BRITA filtration system.
The professional filter head allows two filtration settings for hard
and very hard water.
The P 1000 filter cartridge
• reduces limescale and substances, e.g. chlorine, that affect
taste and odour.
• reduces lead or copper in tap water that can result from certain
types of household installation.
Lifetime of the P 1000 filter cartridge
The lifetime of the P 1000 cartridge is dependant on your individ-
ual volume usage and your water conditions. For optimum BRITA
filtration performance in the UK, we recommend a minimum
exchange of your cartridge every 6 months. Exchange will be
prompted by your BRITA electronic cartridge exchange indicator.
For more information regarding the BRITA electronic cartridge
exchange indicator, see chapter 3.2.
I. Congratulations on your new BRITA®3-Way Water Filter Dispenser System
Thank you for choosing BRITA quality for cleaner, clearer great tasting
BRITA filtered water straight from your BRITA 3-Way Water Filter
Dispenser.
BRITA
water dispenser
P 1000
filter cartridge
BRITA cartridge
exchange indicator

2ENGLISH
II. Quality from the very start
1Terms of warranty
The BRITA 3-Way Water Filter Dispenser system is subject to the
statutory guarantee of 2 years. A guarantee claim may be asserted
only if all instructions in this handbook are followed and observed.
2Contents of the BRITA 3-Way Water Filter
Dispenser Starter Kit
To ensure you get the best result from your BRITA 3-Way Water
Filter Dispenser Starter Kit, please follow these instructions care-
fully.
Your BRITA 3-Way Water Filter Dispenser Starter Kit
includes the following (see fig. 1):
1. P 1000 filter head with two settings including a convenient
locking handle
2. Flexible wall mount
3. P 1000 water filter cartridge
4. BRITA 3-Way Water Filter Dispenser (design may differ from
image shown)
5. BRITA electronic cartridge exchange indicator
6. Hose (1) length = 800 mm, 3/8" nut on one side and M8
connector on the other side, 2 Hoses (2+3), length = 450 mm,
3/8” nut on one side and M8 connectors on the other side
7. Hose (4), length = 800 mm and 3/8" nut on both sides
8. 2 Adapters 1/2" female thread to 3/8" male thread
9. Usage Instructions
10.Carbonate hardness testing strip
11.T-piece
12.Gaskets
Recommended tools for installation: a pipe wrench, an Allen key
(4 mm), a wrench and a screwdriver.
For wall mounting (optional), you need: two screws (e.g. 5 mm
thread diameter) and, if required, two wall plugs suitable for your
type of wall.
1. 2.
3. 4.
5.
6. 7.
10.
8.
11.
(fig. 1)
9.
12.

ENGLISH 3
3BRITA 3-Way Water Filter Dispenser –
easy installation
Before starting, please check that you have all the components
listed above (see fig. 1) as well as the recommended tools.
There are 7 steps to the installation.
!
Prior to installation, read the Technical Data (chapter 7) and
the Important Information (chapter 9). The system cannot
be installed with a low pressure boiler as this might lead to
water damages.
After storage and transport below 0°C, the product must be
stored in the open original packaging for at least 24 hours at
the stated ambient temperatures (chapter 7) for operation.
3.1 Step 1: Selecting the carbonate hardness
setting (++/+) on the filter head
The filter head has been set to meet most European water con-
ditions. In some soft water areas though, you may wish to adjust
the filter head to your local settings. To do so, first carry out a
carbonate test using the supplied testing strip. The strip can be
found in the outer wrapping of these Usage Instructions.
Using the testing strip:
• Let the red response field of the probe soak in a glass of your
tap water for 1 second (fig. 2).
• After 1 minute, compare the colour of the response field with
the table and read the appropriate setting from the table.
Depending on the colour of the testing strip, we recommend
setting your filter head as follows:
Setting + ++
Colour Red, orange,
yellow
Green, dark
green
Capacity 1000 L 500 L
German Carbonate
Hardness [°dH] up to 8.5 above 8.5
English Carbonate
Hardness [°eH] up to 10.6 above 10.6
Setting + ++
French Carbonate
Hardness [°fH] up to 15.2 above 15.2
Grains per Gallon CaCO3
[gpg CaCO3] up to 8.9 above 8.9
Milligram per Litre CaCO3
[mg/L CaO3] up to 151 above 151
The filter head is set to “++” by default. To change the setting,
use an Allen key (4 mm). Turn in the direction of the arrow until
the “+” appears in the window (fig. 3).
The filter head contains a flow regulator already installed which
guarantees smooth water flow from your dispenser even at higher
water pressures.
3.2 Step 2: Starting the BRITA electronic
cartridge exchange indicator
A Commissioning:
Please insert the enclosed batteries (2 x AA) into the appropriate
compartment of the BRITA electronic cartridge exchange indicator
with display. A long beep will sound after insertion of the batteries.
B Initial programming with ++ or + setting (see step 1):
Important: The BRITA electronic cartridge exchange indicator has
been set to 90 days to co-ordinate with the cartridge filtration set-
ting of “++”. Both of these default settings will deliver optimum
filtration performance for most water conditions.
Caution: Please, ensure that you activate the electronic BRITA
cartridge exchange indicator with display during the day so that the
signal can start during the day.
Initial programming with ++ setting (see fig. 4):
aPress the DISPLAY button briefly to activate the display. Initially,
the default setting of 90 days is displayed.
bThen press the START/RESET button briefly to activate the
90-day timer.
cA flashing spot in the bottom left of the display indicates that the
timer has begun.
Initial programming with + setting (see fig. 4):
aPress the DISPLAY button briefly to activate the display. Initially,
the default setting of 90 days is displayed.
bPress and hold the DISPLAY button and then press the
START/RESET button briefly at the same time. This activates
the setting mode.
(fig. 2)
(fig. 3)

4ENGLISH
cTo switch from 90 days to 180 days, press the DISPLAY button
briefly.
dWait until the indicator stops flashing or the DISPLAY switches
off.
eTo activate the 180-day timer, briefly press DISPLAY and then
press the START/RESET button.
fA flashing spot in the bottom left of the display indicates that
the timer has begun.
C Reading actual status
To activate the display during operation, press the DISPLAY button
briefly. The remaining time since the new cartridge was inserted is
shown in days. If the time is exceeded, the time is displayed with
a minus sign.
D Audible signals
aSignal to replace the cartridge: A long signal sounds on the hour
every hour when there are less than 10 days before the end
of the programmed 90 or 180 day setting (15 double beeps). A
shorter reminder (5 double beeps) then sounds every 15 minutes
until the next signal.
bReminder function: Press any button to deactivate the signal for
72 hours if you prefer to be reminded to replace the cartridge at
a later date.
cBattery change signal: When the batteries are depleted, a long
signal sounds (15 single beeps) followed by a short reminder
signal (5 single beeps) every 15 minutes until the next signal on
the hour.
dSwitching the device off: This is only possible by removing the
batteries from the battery compartment.
E Activating the reset function when replacing the
cartridge
aPress the DISPLAY button briefly to activate the display.
bPress and hold the START/RESET button for 5 seconds until a
long beep sounds.
cThe last programmed 90 or 180 day setting now appears in the
display.
dThe timer starts automatically.
F Changing the batteries
aAfter changing the batteries, a long beep sounds.
bAfter the beep, press the DISPLAY button briefly to activate the
display.
cThe remaining days since the last reset are now displayed.
(Caution: Only possible up to 16 hours after the batteries are
fully depleted. After this time, the device reverts back to the
factory setting and must be reprogrammed – see Point B).
G Installation
You can fix the electronic BRITA cartridge exchange indicator with
display to a suitable, dry place using the supplied hook and loop
fastener. We recommend installing it under the sink. Avoid contact
with water/splashes!
H Reprogramming the BRITA cartridge
exchange indicator
aPress the DISPLAY button briefly to activate the display.
The preprogrammed 90 or 180 day setting is displayed.
bPress and hold the DISPLAY button and then press the
START/RESET button briefly at the same time. This activates
the setting mode.
cTo switch to 90 or 180 or 360 days, press the DISPLAY button
briefly (360 days for +-setting for P 3000 refill cartridge).
dWait until the selected value stops flashing or the DISPLAY
switches off.
eTo activate the selected timer, press the DISPLAY button briefly
and then press the START/RESET button.
Technical data:
• Batteries: 2 AA (removable)
• Acoustic alarm: when batteries are low, or after 3 or 6 months
• To avoid loss of data, change the battery within 12 hours.
• After 16 hours without power, the appliance switches back to its
factory settings.
• The display automatically switches to stand-by mode after 10
seconds.
(fig. 4)

ENGLISH 5
3.3 Step 3: Installing the BRITA 3-Way Water
Filter Dispenser
To install the BRITA 3-Way Water Filter Dispenser, firstly ensure
you have all the components required (see fig. 5).
1. BRITA 3-Way Water Filter Dispenser (design may differ) with
3 hoses
2. Shank (WD 3010 different design)
3. Base (models WD 3030 and WD 3040 only)
4. Joint
5. Flat Gasket
6. Flange
7. Hex nut
Please make sure that there is enough room for the P 1000 filter
cartridge, the hoses and the BRITA electronic cartridge exchange
indicator under the sink.
1.
2.
3.
4.
5.
6.
7.
(fig. 5)
First of all, dismount your existing kitchen tap.
Aa) Turn off the cold and hot water supplies
b) Please make sure you release any pressure by opening
all levers.
!No water should run through the existing kitchen tap!
c) Unscrew the existing hoses from the cold and hot water
supply.
!We recommend placing a suitable container under the water
supply as there will be water left in the hoses which will run
down when you unscrew them!
d) Unscrew your kitchen tap – there is no standard mounting but
in general a pipe wrench will help you to dismount it.
e) Pull out both your kitchen tap and the hoses.
You’re now ready to install the BRITA 3-Way Water Filter Dispenser
(see fig. 5).
First of all, screw the shank (2) into the 3-Way Water Filter
Dispenser (1).
Screw the hoses into the dispenser (see fig.6).
Screw the M8 connector of the hose with the blue stripe into the
hole H1.
Screw the M8 connector of the hose with the red stripe into the
hole H2.
Screw the M8 connector of the 800 mm hose into the hole H3.
H1
H3 H2
(fig. 6)
!Ensure the connections are screwed tight, but avoid over
tightening!
Then put the base (3) over the hole and fix the BRITA 3-Way Water
Filter Dispenser (1) in place using the supplied counter plate (4), the
gasket (5), the locking ring (6) and the hexagon nut (7).
3.4 Step 4: Attaching the hoses
!We recommend that you arrange all the parts you need in
front of you before you begin.

6ENGLISH
For wall mounting (optional), you will need: two screws (e.g. 5 mm
thread diameter) and, if required, two wall plugs suitable for your
type of wall.
Please follow the diagram below (see fig. 7) and perform the steps
in the right order.
a) Connect supplied T-piece on your cold water supply
a. Insert one 3/8" gasket into the female nut of the supplied
T-piece.
b. Connect this end of the t-piece to your cold water supply.
!
If you do have an additional free 3/8” cold water supply for
the BRITA 3-Way Water Filter Dispenser in your kitchen, you
do not need to install the supplied T-piece!
If your cold water supply does not fit the 3/8" connector of
the T-piece, use the supplied adapter if required. Please
insert the 1/2" gasket into the female nut of the adapter first.
Your Starter Kit comes with two 1/2" adapters. Please go to
your nearest supplier for adapters in other sizes.
b) Connect the hose with the blue stripe to one side of the T-piece.
c) Take the hose with two 3/8" connectors. Insert the 3/8" gaskets
into the respective female threads of the two hose ends. Con-
nect one end with the free side of the T-Piece.
d) Now connect the other end to the filter head inlet. This is
labelled “IN” (inlet) and marked with an arrow. Make sure that
the gaskets are seated correctly!
e) Connect the 800 mm hose which is connected with the
dispenser with the outlet of the filter head labelled with an out
arrow.
Hose 2:
800 mm
C
3/8"
B
3/8"
Hose 1:
800 mm
A
3/8"
or Adapter
D
(fig. 7)
Hot water
supply
Cold water
supply

ENGLISH 7
f) Connect the hose with the red stripe with your hot water supply.
If your hot water supply does not fit the 3/8" connector, use the
supplied adapter if required. Please insert the 1/2" gasket into
the female nut of the adapter first.
g) Make sure all connections are tightened properly. Avoid over
tightening.
!
The max. tightening torque for the G3/8" connections may
not exceed 14 Nm! Only hose connections with gaskets
(5) may be used – hoses with conical screw connections
damage the connections of the filter head and invalidate any
warranty claims!
3.5 Step 5: Inserting the filter cartridge (see fig. 8)
ARemove the protective cap (1) and check if the O-Ring is
installed (see fig. 8).
BInsert the filter cartridge (4) vertically into the filter head (2).
(fig. 8)
3.
2.
1.
4.
5.
!The filter cartridge can only be inserted when the locking
handle is open.
Make sure that the filter cartridge is positioned correctly.
CTurn the locking handle (3) until you feel it engages.
3.6 Step 6 (optional): Space-saving wall mount
to install the cartridge under the sink
(see fig. 9)
!During assembly, note the installation dimensions, bending
radii of the hoses and dimensions of the accessories. The
system can be operated vertically and horizontally. When
using the wall mount, install vertically only!
1.
2.
3.
4.
(fig. 9)

8ENGLISH
AAttach the wall mount in place using the two matching screws
and use two wall plugs, if necessary, depending on the type of
wall.
BEngage the filter head (2) in the wall mount (1). Please use the
fixation holes (4).
3.7 Step 7: Commissioning
Before use, make sure that you have followed all the steps
correctly and all the parts are fitted. Place a suitable container
under the cartridge to catch any leakages.
ATurn on the cold and hot water supplies and check the system
carefully for any leaks.
BOpen the BRITA branded lever on your BRITA 3-Way Water
Filter Dispenser and rinse through until the filtered water runs
clear and without any bubbles (at least 2 litres).
4Replacing the filter cartridge
The filter cartridge must be replaced when it runs out or at
latest 6 months after commissioning, irrespective of the level of
exhaustion of the filter system.
!
Read the Operating and Safety Information (chapter 9)
prior to exchange. After storage and transport below 0°C,
the product must be stored in the open original packaging
for at least 24 hours at the stated ambient temperatures
(chapter 7) for operation.
NOTE
The filter cartridge can be pivoted by 90° in the wall mount
for easy removal. When the locking handle is open, the
water supply to the cartridge is interrupted and by-passing
with direct water flow from the water inlet to the outlet is
possible.
Replacing the P 1000 (see fig. 8):
AOpen the locking handle (3).
BPlace a suitable container under the flush hose to catch the rinse
water. Activate the flush valve (5) and release pressure from the
system.
CRemove the exhausted filter cartridge (4) from the filter head (2) –
please be aware, the cartridge is firmly embedded so you can
give it a firm pull without worrying about breaking it.
DInsert the new filter cartridge (see chapter 3.5).
EClose the locking handle (3).
FReset the BRITA cartridge exchange indicator (chapter 5)
Replacing the P 3000 refill cartridge is exactly the same as
replacing the P 1000. The P 3000 lasts up to 6 months with the
++-setting and up to a year with the +-setting. Please take this
into consideration while resetting your BRITA cartridge exchange
indicator.
5Resetting the BRITA electronic cartridge
exchange indicator
If the maximum time or volume is reached, the BRITA electronic
cartridge exchange indicator will start beeping. (chapter 5)
– then the filter cartridge should be changed (chapter 4)
– the BRITA electronic cartridge exchange indicator has to be
reset.
a) Press the DISPLAY button briefly to activate the display.
b) Press and hold the START/RESET button for 5 seconds until a
long beep sounds.
c) The last programmed 90 or 180 day setting now appears in
the display.
d) The timer starts automatically.
6Maintenance
Regularly check the filter system for leaks. Regularly check the
hoses for kinks. Bent hoses must be replaced.
!Prior to exchanging the filter system, read the Technical
Data (chapter 7) and the Operating and Safety Information
(chapter 9).
Regularly clean the outside of the filter system with a soft, damp
cloth.
!Do not use any abrasive chemicals, cleaning solutions or
astringent cleaning agents.

ENGLISH 9
7Technical data of the P 1000 cartridge
Operating pressure 2 bar to max. 8.6 bar
Water intake temperature 4°C to 30°C
Ambient tem-
perature for
operation 4°C to 40°C
storage/transport –20°C to 50°C
Nominal service flow
(acc. to DIN 18879) 60 L/h
Capacity up to carbonate hardness
8.5 °dH at setting “+” 1000 L
Capacity from carbonate hardness
8.5 to 17 °dH at setting “++” 500 L
Pressure loss by nominal service flow 0.2 bar
Empty filter cartridge volume 1 L
Weight (dry/wet) 1.0 kg/1.4 kg
Dimensions
(Width/Depth/
Height)
Filter system
(filter head with filter
cartridge) 117 mm/108 mm/265 mm
Filter cartridge 108 mm/108 mm/259 mm
Installed dimensions
(vertical installation
with wall mounting
bracket)
137 mm/130 mm/265 mm
Operating position Horizontal and vertical
Water inlet connection G3/8"
Water outlet connection G3/8"
8Troubleshooting
ANo water flow
Cause: Water intake closed.
Troubleshooting: Open the water intake at the upstream shut-off
valve or by closing the locking handle (3) on the
filter head. Check hoses for kinks.
BNo or low water flow in spite of open water intake
Cause: Mains pressure too low.
Troubleshooting: Check mains pressure. If the fault continues,
check the filter system and filter cartridge and
replace if necessary. Check hoses for kinks.
Cause: Filter head not mounted in direction of water
flow / hoses wrongly connected.
Troubleshooting: Dismantle filter head and hoses and install in
direction of water flow (chapter 3.4).
CLeak
Cause: Screwed connections not fitted correctly.
Troubleshooting: Check mains pressure. Check all screwed
connections and mount as described in
chapter 3.4.
DIncorrect display or incorrect settings on the electronic
cartridge exchange indicator with display
Cause: Buttons pressed in wrong order or wrong
buttons pressed.
Troubleshooting: Press and hold the RESET button for
8 seconds.
For models WD 3030 and WD 3040 only
These models have an aerator with two integrated outlets. The
Inner one is for BRITA filtered water, the outer area for hot and cold
water. As with every tap aerator, there can be lime scale build up
in the outer area. Therefore it is recommended to clean the aerator
on a regular basis. For cleaning: Unscrew the cap on the end of the
dispensers neck. The aerator is connected to a silicon hose. Detach
it carefully and clean the aerator (e.g. with vinegar). After cleaning
connect the long, thin part on the back of the aerator carefully with
the silicon hose. Place the cap over the aerator and screw it tight.
Make sure that the gasket in the cap is seated correctly. When
installed correctly there should not be any leaks whilst running hot,
cold or BRITA filtered water.
If you want to replace the aerator with a new one, you can order
it from BRITA. You can find the contact details for your BRITA
customer service team next to your country code on the back of
this booklet.
(fig. 10)

10ENGLISH
9Important notes
Protect the P 1000 water filter cartridge from direct sunlight and
mechanical damage. Do not assemble near sources of heat and
open flames. A stop valve must be installed before the filter sys-
tem intake hose. The BRITA 3-Way Water Filter Dispenser System
is only suitable for domestic use.
Only water of drinking water quality may be used as intake water
for the BRITA water filter system. The BRITA water filter cartridge
is only suitable for cold water use within the supply water tem-
perature stated in chapter 7. No microbiologically impaired water
or water of unknown quality may be used without appropriate
disinfection.
The system cannot be installed with a low pressure boiler.
Irrespective of the water used, you should use stainless steel
utensils or kettles with stainless steel heating elements. This is of
particular importance to people who are sensitive to nickel.
In the event: filter first, and then boil
If there are official instructions to boil tap water, the filter system
must be decommissioned. When the requirement to boil water
comes to an end, the filter cartridge must be replaced and the con-
nections cleaned.
Ultimate hygiene
• For hygiene reasons, the filter material of the cartridge is
subjected to a special treatment with silver. A small quantity
of silver, which is harmless to health, may be released into the
water. This is in compliance with the World Health Organisation
(WHO) recommendations for drinking water.
• It is generally recommended to boil tap water for certain groups
of people (e.g. people with weak immune systems, babies). This
also applies to filtered water.
• Note for people with kidney disease or dialysis patients: The fil-
tering process can cause a small rise in the levels of potassium.
• The water filtrate is classified in Category 2 according to
EN 1717.
Optimum use
• BRITA recommends that the filter system is not left unused
for a long period. If the BRITA 3-Way Water Filter Dispenser is
not used for several days (2–3 days), we recommend that the
filter system be flushed with the flushing volume X indicated in
the table below. After stagnation periods of over 4 weeks, the
filter should be flushed with flushing volume Y or else replaced.
Please also note the maximum usage period of the filter car-
tridge is 6 months.
Flushing volume X after 2–3 days stagnation Flushing volume
P 1000 2 Litres
Flushing volume Y after 4 weeks stagnation Flushing volume
P 1000 20 Litres
• The filter kit must not be opened or dismantled during operation.
The filter cartridge must not be opened. The filter kit is designed
for a service life of 5 years counted from the date of installation.
BRITA filtered water is designed for human consumption. Use it
within 1–2 days.
Sensitive to potassium?
The filtering process can cause a small rise in the levels of potas-
sium. However, one litre of BRITA filtered water contains less
potassium than an apple, for example. If you have kidney disease
and/or have to observe a special potassium diet, we recommend
that you consult your doctor before using the water filter.
Natural traces
As with every natural product, the P 1000 parts can be subject
to natural fluctuations. This can lead to a slight abrasion of small
carbon particles into your filtered water, noticeable as black bits.
These particles have no negative health effects. If ingested, they
will not harm the human body. In case you observe carbon parti-
cles, BRITA recommends flushing out the P 1000 filter cartridge
until the black bits disappear.
III. Important notes

ENGLISH 11
Correct disposal of the BRITA cartridge
exchange indicator
Every BRITA cartridge exchange indicator has a
useful life of approx. 5 years. At the end of the
useful life of the cartridge exchange indicator,
remember that it must be disposed of according
to the applicable regulations and statutory require-
ments.
Exclusion of liability
BRITA shall not be held liable for any damage, including subsequent
damage, arising from the incorrect use of the product.
100% satisfaction: the BRITA guarantee
We are confident that this BRITA product will
meet your demands in terms of quality and
performance. If this product does not meet your
expectations, we will accept its return within
30 days of the date of purchase and reimburse
the purchase price. Just send the product with
your proof of purchase (receipt) and the grounds
for your dissatisfaction, your phone number and
bank details to the customer service address for
your country (on the back of this booklet).
BRITA recycling: for our environment
To work together in taking responsibility for our
environment, you can return your P 1000 filter
cartridges to a number of BRITA dealers.
More about BRITA: For details on recycling,
please see www.brita.net.
The BRITA service hotline cares
Do you have any questions about your BRITA product? Or on the sub-
ject of water filtration? Give us a call! You can find the contact details
for your BRITA customer service team next to your country code on
the back of this booklet.
The best side of water: www.brita.net
Are you looking for your nearest BRITA retailer? Do you want more
detailed information about BRITA products? Or about the BRITA com-
pany? Want to make the most of one of BRITA’s service offers? Up-
to-date information, consumer tips, seasonal competitions, delicious
coffee and tea recipes can be found around the clock at www.brita.net
Registering your product online
Benefit from registering your product online. For more information on
this and your registration code, see the leaflet in your BRITA 3-Way
Water Filter Dispenser Starter Kit.
IV. BRITA®, quality and satisfaction guaranteed

Contactadres / adresse de contact:
BRITA GmbH Belgium
Boomsesteenweg 690
2610 Wilrijk
Tel.: [phone]
Tel.: [phone]
www.brita.be
BRITA Wasser-Filter-Systeme AG
Gassmatt 6
CH-6025 Neudorf/LU
Verbraucherservice/Téléphone client/
Servizio di assistenza ai consumatori:
Tel.: [phone]
www.brita.ch
BRITA GmbH
Heinrich-Hertz-Str. 4
D-65232 Taunusstein
Verbraucherservice:
Tel.: [phone]
www.brita.de
BRITA Iberia S.L.U.,
Rambla Cataluña, 18 - 4º Izq.
08007 - Barcelona
Tel.: [phone]
www.brita.es
BRITA France
Parc Technologique
16 rue du Bois Chaland
91090 Lisses
E-Mail: [email protected]
N° AZUR: 0810 73 15 45
www.brita.fr
BRITA Water Filter Systems Ltd.
BRITA House
9 Granville Way
Bicester, Oxfordshire, OX26 4JT, UK
BRITACare:
Tel.: [phone]
www.brita.co.uk
BRITA ITALIA S.r.l.
Viale Kennedy, 21
I-24066 Pedrengo (BG)
Tel.: [phone]
Tel.: [phone]
Numero Verde: 800 913 716
Fax: [phone]
E-Mail: [email protected]
www.brita.it
Contactadres:
BRITA GmbH Netherlands
Kanaaldijk Noord 109G
5642 JA Eindhoven
Tel.: [phone]
Tel.: [phone]
www.brita.nl
BRITA Polska Sp.z o.o.
Ołtarzew, ul. Domaniewska 6
05-850 Ożarów Mazowiecki, Polska
Tel.: [phone]
Faks: [phone]
www.brita.pl
BRITA Iberia S.L.U.,
Rambla Cataluña, 18 - 4º Izq.
08007 - Barcelona
Tel.: [phone]
www.brita.pt
BRITA GmbH
Heinrich-Hertz-Str. 4
D-65232 Taunusstein
Verbraucherservice:
Tel.: [phone]
www.brita.at
1010534-000 GA 3-Way Filter Dispenser Set CE