Briteq BTX-SUPREME HYBRID User manual

ENGLISH
USER MANUAL
BRITEQ® 1/24 BTX-SUPREME HYBRID
OPERATION MANUAL
Thank you for buying this Briteq®product. To take full advantage of all possibilities and for your own safety,
please read these operating instructions very carefully before you start using this unit.
FEATURES
•BTX-SUPREME HYBRID is an extremely bright hybrid moving head for big clubs, concert stages and rental!
•The OSRAM SIRIUS HRI 471W SN lamp (CCT: 7500K), combined with Hi-Q optics, make it incredibly bright:
•BEAM: 1,8° ~ 22°, max. 485’000 lux @ 10m
•SPOT: 3° ~ 42°, max. 132‘000 lux @ 10m
•The different effect wheels and filters create dazzling effects:
•Precise and fast CMY-color mixing
•1 color wheel with 13 carefully selected colors, including 3200K CTO-filter + white
•1 gobo wheel with 13 static gobos + open
•1 gobo wheel with 9 easily replaceable rotating/indexable glass gobos (OD: 17mm / IM: 12mm)
•2 Prism wheels, each with 4 rotating/indexable prisms, can be combined to create stunning effects!
•1 Rotating/indexable animation wheel that can be combined with different gobos
•1 light FROST-effect 0-100%
•1 heavy FROST-effect 0-100%
•1 Hi-CRI filter to improve the white light quality
•Motorized ZOOM + FOCUS with calibrated DMX-values
•Accurate Dimmer/shutter for linear dimming and variable strobe effects
•The 3-Phase stepper motors assure very fast 540°/270° PAN/TILT movements with 8 or 16bit precision.
•Selectable PAN range: 540° or 630°
•Modular setup for easy servicing and cleaning.
•Supported protocols: DMX512/RDM, Art-Net™, sACN
•Integrated wireless DMX module (W-DMX Sweden) with internal antenna to prevent antenna breakage.
•2 DMX channel modes (standard: 24ch & Extended: 35ch) for maximum flexibility
•2.8" Color touch screen with automatic display rotation for easy and intuitive menu navigation
•Rotary encoder for easy scrolling through the intuitive setup menu
•Factory & user defaults: easily save and recall your own preferred settings!
•Easy firmware updates via USB memory stick to keep your machine always up-to-date
•Remote lamp on/off control
•Remote FULL 471W / ECO 360W lamp control to extend the lifetime, up to 2’000 hours.
•Neutrik®3pin & 5pin XLR & RJ45 network in/outputs for maximum flexibility in a professional environment
•Neutrik®powerCON TRUE1 in/outputs: up to 12A can be daisy chained for easy installation
•Equipped with 2 omega brackets for fast installation.
•Power consumption: max. 800W
BEFORE USE
•Before you start using this unit, please check if there’s no transportation damage. Should there be any, do
not use the device and consult your dealer first.
•Important: This device left our factory in perfect condition and well packaged. It is absolutely necessary for
the user to strictly follow the safety instructions and warnings in this user manual. Any damage caused by
mishandling is not subject to warranty. The dealer will not accept responsibility for any resulting defects or
problems caused by disregarding this user manual.
•Keep this booklet in a safe place for future consultation. If you sell the fixture, be sure to add this user manual.
Check the contents:
Check that the carton contains the following items:
•1x BTX-SUPREME HYBRID
•2x Omega brackets
•1x Power cable
•1x Operating instructions

ENGLISH
USER MANUAL
BRITEQ® 2/24 BTX-SUPREME HYBRID
SAFETY INSTRUCTIONS:
•To protect the environment, please try to recycle the packing material as much as possible.
•To prevent fire or shock hazard, do not expose this appliance to rain or moisture.
•To avoid condensation to be formed inside, allow the unit to adapt to the surrounding temperatures when
bringing it into a warm room after transport. Condense sometimes prevents the unit from working at full
performance or may even cause damages.
•This unit is for indoor use only.
•Don’t place metal objects or spill liquid inside the unit. Electric shock or malfunction may result. If a foreign
object enters the unit, immediately disconnect the mains power.
•Locate the fixture in a well-ventilated spot, away from any flammable materials and/or liquids. The fixture
must be fixed at least 100cm from surrounding walls.
•Don’t cover any ventilation openings as this may result in overheating.
•Prevent use in dusty environments and clean the unit regularly.
•Keep the unit away from children.
•Inexperienced persons should not operate this device.
•Maximum safe ambient temperature is 40°C. Don’t use this unit at higher ambient temperatures.
•Make sure the area below the installation place is free from unwanted persons during rigging, de-rigging and
servicing.
•Allow the device about 10 minutes to cool down before to start servicing.
•Always unplug the unit when it is not used for a longer time or before to start servicing.
•The electrical installation should be carried out by qualified personal only, according to the regulations for
electrical and mechanical safety in your country.
•Check that the available voltage is not higher than the one stated on the unit.
•The power cord should always be in perfect condition. Switch the unit immediately off when the power cord
is squashed or damaged. It must be replaced by the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
•Never let the power-cord come into contact with other cables!
•This fixture must be earthed in order to comply with safety regulations.
•Don’t connect the unit to any dimmer pack.
•Always use an appropriate and certified safety cable when installing the unit.
•In order to prevent electric shock, do not open the cover. There are no user serviceable parts inside.
•Never repair a fuse or bypass the fuse holder. Always replace a damaged fuse with a fuse of the same type
and electrical specifications!
•In the event of serious operating problems, stop using the fixture and contact your dealer immediately.
•The housing and the lenses must be replaced if they are visibly damaged.
•Please use the original packing when the device is to be transported.
•Due to safety reasons, it is prohibited to make unauthorized modifications to the unit.
Important: Never look directly into the light source! Don’t use the effect in the presence of persons suffering
from epilepsy.
CAUTION: To reduce the risk of electric shock, do not remove
the top cover. No user-serviceable parts inside. Refer servicing
to qualified service personnel only.
The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the
use or the presence of un-insulated “dangerous voltage” within the product’s enclosure that may
be of sufficient magnitude to constitute a risk of electric shock.
The exclamation point within the equilateral triangle is intended to alert the user to the presence
of important operation and maintenance (servicing) instructions in the literature accompanying
this appliance.
This symbol means: indoor use only
This symbol means: Read instructions
The device is not suitable for direct mounting on normally flammable surfaces. (Suitable only for
mounting on non-combustible surfaces)

ENGLISH
USER MANUAL
BRITEQ® 3/24 BTX-SUPREME HYBRID
OVERHEAD RIGGING
•Important: The installation must be carried out by qualified service personal only. Improper
installation can result in serious injuries and/or damage to property. Overhead rigging requires
extensive experience! Working load limits should be respected, certified installation materials
should be used, the installed device should be inspected regularly for safety.
•Make sure the area below the installation place is free from unwanted persons during rigging, de-rigging
and servicing.
•Locate the fixture in a well-ventilated spot, far away from any flammable materials and/or liquids. The fixture
must be fixed at least 50cm from surrounding walls.
•The device should be installed out of reach of people and outside areas where persons may walk by or be
seated.
•Before rigging make sure that the installation area can hold a minimum point load of 10times the device’s
weight.
•Always use a certified safety cable (number 3 on the
picture) that can hold 12 times the weight of the device
when installing the unit. This secondary safety
attachment should be installed in a way that no part of
the installation can drop more than 20cm if the main
attachment fails.
•The device should be well fixed; a free-swinging
mounting is dangerous and may not be considered!
•Don’t cover any ventilation openings as this may result
in overheating.
•The operator has to make sure that the safety-relating
and machine-technical installations are approved by an
expert before using them for the first time. The
installations should be inspected every year by a skilled
person to be sure that safety is still optimal.
Please note that the light beam of this projector can be very hot!
Therefore, it is not allowed to install this projector less than 1 meter from
highly flammable materials. We strongly recommend to keep a minimum
distance of 15m from the object to be illuminated.
Also make sure that the light beam never hits other projectors in the direct
surroundings (for example on the same truss), this can cause damage to the housing
of the illuminated projectors.

ENGLISH
USER MANUAL
BRITEQ® 4/24 BTX-SUPREME HYBRID
HOW TO SET UP THE UNIT
DESCRIPTION OF CONTROLS
1. DISPLAY: shows the various menus and the selected functions.
2. MENU / ESC button: Press to enter the setup menu or jump to the higher menu level.
Note: when the menu lock function is active: press the button until the countdown bar at the bottom of the
display is full.
3. JOG WHEEL: turn the wheel in both directions to browse the menu items. Press the wheel to select an
item.
4. MAINS FUSE: this fuse only protects the electronics of the projector, always use the prescribed fuse! The
mains in/outputs are not fused.
5. MAINS IN / OUTPUT: with PowerCON® TRUE1 connectors. Connect the supplied mains cable here, you
can daisy chain up to max. 6 units (240Vac) or max. 2 units (100Vac). Input and output are connected to
each other without any fuse.
Hint: Please check our website for special cable assemblies that contain both power (3x1.5mm² with
Neutrik PowerCON® TRUE1) and balanced signal (XLR 3pin or 5pin) in one cable. Different lengths are
available: 1.3m, 3m, 5m and 10m, very convenient!
6. ETHERNET IN/OUT: used to connect the projector to an Ethernet network, Art-Net / sACN protocol is
supported.
7. DMX IN/OUTPUTS: used for DMX512 linking, you can use good quality balanced signal cables with 3pin
or 5pin XLR-connectors.
8. USB-connector: you can download the firmware update files from our website and put these on a (FAT32
formatted) USB-memory. See the option “USB Update” in the next chapter.
Note: firmware updates can also be done using the DMX-input and (optional) FIRMWARE UPDATER 2+
(order code: B05019)
9. OMEGA BRACKET BASE: base with fixing points for the included omega brackets + safety cable, see
previous chapter “overhead rigging”
10. PAN / TILT LOCKS: locks and unlocks the pan and tilt movements every 45°. To be used during transport
and repair/cleaning work on the machine.
!!! IMPORTANT: must always be unlocked before operation !!! –
11. FILTER GRIDS: On both sides of the base are metal grids with magnetic closure. These can be opened
without tools to clean or replace the dust filter. To be cleaned at regular intervals.
12. LAMP COMPARTMENT: can be opened to change the lamp. See next chapter for more information.

ENGLISH
USER MANUAL
BRITEQ® 5/24 BTX-SUPREME HYBRID
LAMP (RE)PLACEMENT
In case of lamp replacement or maintenance, do not open the fixture within 10 minutes until
the unit has cooled down after being turned off. Always unplug the fixture before
performing maintenance! Always use the same type of spare parts (lamps, fuses, etc.)
When replacing parts, use only original spare parts.
Because of the high internal pressure, there is a risk that the discharge lamp will explode during use. The
lamp emits intense UV radiation that is harmful to the eyes and skin. The high intensity of the light arc can
cause serious damage to the retina if you look at the lamp up close.
To protect the lamp, always turn the lamp off first (via control panel or DMX controller) and let it run for at
least ten minutes to cool down before turning off the mains power. Never handle the lamp or fixture when it
is hot. Wear gloves, do not touch the lamp with bare hands. If this should happen, clean the lamp with
denatured alcohol and wipe it with a lint-free cloth before installing it. When ignited, the lamp operates under
high pressure and there is a slight risk of arc tube rupture. The risk increases with age, temperature and
improper handling of the lamp. Do not use the lamp longer than its prescribed lifetime.
Make sure the lamp is in the center of the reflector for best projection.
•Switch off the unit and unplug the mains cable.
•Wait for about 10 minutes until the unit has been cooled down.
•Use a screwdriver to unscrew the screws (A+B) to open the back cover of the fixture: turn the screws 90°
counterclockwise.
Inside you will find the OSRAM “Sirius HRI 471W SN” lamp
Attention: wear gloves, do not touch the bulb with bare hands. If this happens, clean
the lamp with denatured alcohol and wipe it with a lint free cloth before installation.
Not doing this will shorten the life of the new lamp!
•Remove the cables gently from the lamp terminals.
•No need to unscrew any more screws to remove the lamp, just grip the green lamp base
and turn is GENTLY counterclockwise over 45° (C).
•Once you feel the lamp comes loose: gently pull it out of the lamp
compartment (D)
•Hold the new lamp by its green base, rotate it over 45° so the 2 lamp
terminals are pointing to the bottom left, and insert it in the lamp
compartment.
•Rotate the lamp clockwise over 45° so the lamp terminals are now
pointing to the left.
•Connect the cables to the terminal of the new lamp.
Important: ONLY use an original OSRAM “Sirius HRI 471W SN”
(order code: 4052899581005), other lamps could result in less performance or even damage the unit.

ENGLISH
USER MANUAL
BRITEQ® 6/24 BTX-SUPREME HYBRID
•Switch the unit back on and use a DMX controller to point the open beam on a wall.
Attention: avoid looking at light coming directly from the lamp inside the unit, the UV-radiation of the
lamp is harmful for your eyes. (The light of the beam passes through a UV-filter first)
•You will see a hotspot in the beam projected on the wall. Adjust this
hotspot using the 2 screws (E) as shown on the picture. The hotspot
should be as much as possible in the center of the beam.
•When this is done: close the cover
•Done!
GENERAL MENU OPERATION:
The 2.8” LCD color touch display contains 2 parts:
•5 touch buttons on the left for direct access, 3 can be selected with
the jog wheel:
•SET CONFIG: access to most setup parameters
•INFORMATION: to check the status of different functions
•TEST: to access
In addition, there are 2 extra touch keys
•RETURN: same function as the MENU/ESC. button
•HOME: press this icon to quit the setup menu and return
immediately to the standard display.
•5 text lines on the right where the different functions are listed.
•Press the MENU/ESC button to enter the setup menu.
Note: when the menu lock function is active: press the button until the countdown bar at the bottom of the
display is full.
•Turn the jog wheel to browse the 3 main menus (or press the icons): / /
•Press the jog wheel to select the desired menu.
•Turn the jog wheel to browse the sub menus & items.
•Turn and press the jog wheel to select the desired menu item.
•Turn the jog wheel to change the parameters.
•Press the jog wheel to confirm the new parameters.
•Press the MENU/ESC button jump to a higher menu level.
SET CONFIG menu
ADDRESS Set
Submenu with DMX related functions.
DMX-Address
Used to set the DMX-starting address.
•Turn and press the jog wheel to select the desired menu item.
•Turn the jog wheel to change the parameters or press the touch buttons on the screen
to enter the address.
•Press the jog wheel to confirm.
IP-Address
Used to set the Ethernet IP-address.
•Turn and press the jog wheel to select the desired menu item.
•Turn the jog wheel to change the parameters or press the touch buttons on the screen
to enter the address.
•Press the jog wheel to confirm.

ENGLISH
USER MANUAL
BRITEQ® 7/24 BTX-SUPREME HYBRID
Note: options written in red color are the default values.

ENGLISH
USER MANUAL
BRITEQ® 8/24 BTX-SUPREME HYBRID
IP NetMask
Used to set the Net Mask of the projector while controlled using the Ethernet ports.
Based on the IP-address the correct netmask is already set, you can still change it if really needed:
•Turn and press the jog wheel to select the desired menu item.
•Turn the jog wheel to change the parameters:
•255.000.000.000
•255.255.000.000
•255.255.255.000
•Press the jog wheel to confirm.
DMX Universe
Used to set which DMX-universe should be used while controlled via the Ethernet ports.
•Turn and press the jog wheel to select the desired menu item.
•Turn the jog wheel to change the parameters: 000 → 255.
•Press the jog wheel to confirm.
IP Protocol
Used to select which Ethernet protocol you want to use for communication.
•Turn and press the jog wheel to select the desired menu item.
•Turn the jog wheel to change the parameters:
•Art-Net™
•sACN
•Press the jog wheel to confirm.
CHANNEL Mode
Used to set the desired channel setup mode.
•Turn and press the jog wheel to select the desired menu item.
•Turn the jog wheel to select the desired option:
•Standard (24CH)
•Extended (35CH)
•Press the jog wheel to confirm.
Wireless DMX
Menu with functions related to the internal wireless DMX.
W-DMX
Used to switch the wireless DMX module on/off
•Turn and press the jog wheel to select the desired menu item.
•Turn the jog wheel to select the desired option: ON / OFF
•Press the jog wheel to confirm.
Operating mode
Used to switch the wireless DMX module in receiver or transmitter mode
•Turn and press the jog wheel to select the desired menu item.
•Turn the jog wheel to select the desired option:
•Rx (Receiver Mode): The projector works on W-DMX signal and sends it also to the DMX XLR-output.
•Tx (Transmitter Mode): The projector sends the wired DMX-signal to other wireless units.
•Press the jog wheel to confirm.
Transmitting Mode
Used to switch the transmitted W-DMX signal between G3 and G4S
•Turn and press the jog wheel to select the desired menu item.
•Turn the jog wheel to select the desired option: G3 / G4S
•Press the jog wheel to confirm.
Note: Check the “Wireless Solution” website to learn more about G3 / G4S.
Tx: Receivers Link/UNLink
Used to Link / UNLink the connected W-DMX receivers
•Turn and press the jog wheel to select the desired menu item.
•Turn the jog wheel to select the desired option:

ENGLISH
USER MANUAL
BRITEQ® 9/24 BTX-SUPREME HYBRID
•Link: Link the W-DMX receivers that are ready to pair.
•UNLink: Break the existing link with all connected W-DMX receivers so they can be paired again.
•Press the jog wheel to confirm.
Rx: UNLink Sender
Used to break the current connection with a W-DMX transmitter
•Turn and press the jog wheel to select the desired menu item.
•Turn the jog wheel to select the desired option:
•No:Nothing happens, the existing link remains.
•Yes: The existing link with a transmitter is broken so the projector can be paired again.
•Press the jog wheel to confirm.
Fixture Settings
Menu with functions related to the overall settings of the fixtures.
No DMX
Used to set how the projector reacts when the DMX-signal disappears.
•Turn and press the jog wheel to select the desired menu item.
•Turn the jog wheel to select the desired option:
•Blackout: output turns black while no DMX is detected.
•Freeze: output based on the last valid DMX-signal is kept on the projector.
•Press the jog wheel to confirm.
PAN Invert
PAN movement can be inverted.
•Turn and press the jog wheel to select the desired menu item.
•Turn the jog wheel to select the desired option.
•On: PAN movements are inverted
•Off: PAN movements are NOT inverted
•Press the jog wheel to confirm.
TILT Invert
TILT movement can be inverted.
•Turn and press the jog wheel to select the desired menu item.
•Turn the jog wheel to select the desired option.
•On: TILT movements are inverted
•Off: TILT movements are NOT inverted
•Press the jog wheel to confirm.
PAN Range
Used to select the desired PAN range.
•Turn and press the jog wheel to select the desired menu item.
•Turn the jog wheel to select the desired range:
•540 (standard)
•630 (extended)
•Press the jog wheel to confirm.
STANDBY
To save energy the projector goes in sleep mode after a certain time when no DMX is detected.
•Turn and press the jog wheel to select the desired menu item.
•Turn the jog wheel to select the desired option:
•OFF Standby function not used
•0xxM The time (from 005 to 099 minutes) before the standby function is activated.
•Press the jog wheel to confirm.
FEEDBACK
This function corrects the PAN/TILT positions automatically if someone bumps into the machine.
•Turn and press the jog wheel to select the desired menu item.
•Turn the jog wheel to select the desired option: ON/OFF
•Press the jog wheel to confirm.

ENGLISH
USER MANUAL
BRITEQ® 10/24 BTX-SUPREME HYBRID
LAMP ON/OFF
Used to manually switch the discharge lamp on/off
•Turn and press the jog wheel to select the desired menu item.
•Turn the jog wheel to select the desired option: ON/OFF
•Press the jog wheel to confirm.
Note: the lamp can also be switched on/off using the DMX control channel
Temp C/F
Used to select if the Temperature is shown in degrees Celcius (°C) or Fahrenheit (F).
•Turn and press the jog wheel to select the desired menu item.
•Turn the jog wheel to select the desired option: Celcius / Fahrenheit
•Press the jog wheel to confirm.
Power Mode
Used to change the lamp power.
•Turn and press the jog wheel to select the desired menu item.
•Turn the jog wheel to select the desired range:
•FULL Mode: The lamp works at full power (470Watt) for max light output
•ECO Mode: The lamp works at reduced power (380Watt) for max lamp life (+/- 2000 hours)
•Press the jog wheel to confirm.
FANS
On some occasions fan noise should be reduced to a minimum. Therefore, you set 2 fan speed modes.
•Turn and press the jog wheel to select the desired menu item.
•Turn the jog wheel to select the desired option:
•Auto: the fan speed will be automatically adjusted to always have the best balance between fan noise
and performance (light output).
•High: the lamp will be well cooled so maximum light output can be guaranteed under all conditions.
However, this means that fan noise will be higher than usual. While used in discotheques and in hot
summertime conditions this should not be a problem.
•Press the jog wheel to confirm.
LCD Backlight
Determines how long the LCD is lit.
•Turn and press the jog wheel to select the desired menu item.
•Turn the jog wheel to select the desired option:
•Always On: the LCD-backlight is always lit.
•01~59m: the backlight turns dark after 01 to 59 minutes. (default = 1 minute)
•Press the jog wheel to confirm.
LCD Rotate
Used to flip the display 180° when the fixture is mounted upside-down
•Turn and press the jog wheel to select the desired menu item.
•Turn the jog wheel to select the desired option:
•Auto: the display position adapts automatically to the position of the projector
•180°:you can flip the display manually if you like.
•Press the jog wheel to confirm.
LCD Lock
Used to lock the setup menu against unwanted altering of the settings.
•Turn and press the jog wheel to select the desired menu item.
•Turn the jog wheel to select the desired option:
•Off:the setup menu is immediately available when you press the MENU/ESC. button
•On:to access the setup menu you have to press the MENU/ESC. button until the countdown bar is full.
•Press the jog wheel to confirm.

ENGLISH
USER MANUAL
BRITEQ® 11/24 BTX-SUPREME HYBRID
LCD Error warning
Used to select if the display must show error messages or not.
•Turn and press the jog wheel to select the desired menu item.
•Turn the jog wheel to select the desired option: ON/OFF
•Press the jog wheel to confirm.
Defaults
Menu with functions related to the default settings.
FACTORY Load?
Most common settings while controlled by DMX lighting controller.
•Turn and press the jog wheel to select the desired menu item.
•Turn the jog wheel to select the desired option:
•NO nothing happens
•YES the Factory settings are loaded.
•Press the jog wheel to confirm.
USER Load / Save?
Makes it possible to save / load your own preferred default settings.
•Turn and press the jog wheel to select the desired menu item.
•Turn the jog wheel to select the desired option:
•USER Load? All previously saved personal parameters are loaded.
•USER Save?All current parameters from the default settings table are saved to memory.
•Press the jog wheel to confirm.
INFORMATION menu
TIME info
Shows TIME-related information
•Turn and press the jog wheel to select the desired menu item.
•Turn the jog wheel to select the desired option:
•TOTAL Time: the total time the projector was used. (no reset possible)
•LAST JOB Time: used to check how long the projector was used on the last job. (reset possible)
•LAMP Time: used to check the hours the lamp already served (reset when replacing the lamp)
TEMP info
Shows temperature-related information
•Turn and press the jog wheel to select the desired menu item.
•Turn the jog wheel to select the desired option: BASE / HEAD temperature
FAN speed
Shows speed of the different fans
•Turn and press the jog wheel to select the desired menu item.
•Turn the jog wheel to select the desired option: Speed of the different FANs is listed.
Error Info
Shows Error information
•Turn and press the jog wheel to select the desired menu item.
•Turn the jog wheel to select the desired option: If any errors occur, they will be listed here.
Software V.
Information on the software versions
•Turn and press the jog wheel to select the desired menu item.
•Turn the jog wheel to select the desired option: different software versions of the 8 processors are listed.
USB Update
The USB-connector is used to update the firmware of the projector.
•Format a USB memory stick in FAT32
•Create a subdirectory named SUPREME in the root
•Put 1 or more update files (.CKF format) in the SUPREME folder

ENGLISH
USER MANUAL
BRITEQ® 12/24 BTX-SUPREME HYBRID
Update at startup:
A. Switch the projector OFF
B. Insert the USB-stick in the USB-connector on the front.
C. Switch the projector ON
D. The display shows the contents of the memory stick (only the first 8 characters are shown)
E. Turn the jog wheel to select the SUPREME directory and press to confirm
F. The display shows OFF
G. Turn the jog wheel to select ON and press to confirm
→ The projector will be updated with all files in the directory, followed by a complete reset of the unit.
Update without switching the projector off:
A. Insert the USB-stick in the USB-connector on the front.
B. Turn and press the jog wheel to select USB Update in the INFORMATION menu.
C. Select YES and press the jog wheel to confirm.
D. Continue with step “D” of the above “Update at startup” instructions.
TEST menu
Menu with all kinds of test, manual control, reset and calibration functions.
RESET Motors
Used to force a full or partial reset of the unit.
•Turn and press the jog wheel to select the desired menu item.
•Turn the jog wheel to select the desired option.
•Press the jog wheel to confirm.
Note: you can do a full reset (Reset ALL) or only reset certain parts of the unit. Resets can also be done using
the DMX control channel.
TEST Functions
Used to easily test all functions individually.
•Turn and press the jog wheel to select the desired menu item.
•Turn the jog wheel to select the desired option.
•Press the jog wheel to confirm.
MANUAL Control
Used to control the projector manually, without the need of an external DMX-controller.
•Turn and press the jog wheel to select the desired menu item.
•Turn the jog wheel to select the desired option.
•Press the jog wheel to confirm.
•Set the desired parameter: 000 to 255
•Press the jog wheel to confirm.
•Repeat these actions until you get the desired result.
CALIBRATE
Used to calibrate all functions of the projector.
•Turn and press the jog wheel to select the desired menu item.
•Turn the jog wheel to select the desired option.
•Press the jog wheel to confirm.
•Set the desired parameter: 000 to 255
•Press the jog wheel to confirm.
•Repeat these actions until all calibrations are done.
Attention: to prevent unwanted altering of the calibrations, this menu is password protected.
Without setting the right password (PW= 050) access to all settings is denied.
➔Don’t forget to set the password back to 000 when the calibrations are done! 

ENGLISH
USER MANUAL
BRITEQ® 13/24 BTX-SUPREME HYBRID
ELECTRICAL INSTALLATION
Important: The electrical installation should be carried out by qualified personal only,
according to the regulations for electrical and mechanical safety in your country.
Mains power is the same for all units but there are different possibilities to connect the data cabling:
ELECTRICAL INSTALLATION FOR TWO OR MORE UNITS IN WIRED DMX-MODE:
Use this function when you want to control the projectors by any DMX controller.
•Connect the projectors as shown in the drawing below.
•First put the projectors in the desired DMX-mode: see the different DMX-charts and choose the one that
suits you best.
•Give all projectors a start address: each projector shows its start + end address, make sure that the
addresses do not overlap!
Some general information on DMX:
•The DMX-protocol is a widely used high speed signal to control intelligent light equipment. You need to
“daisy chain” your DMX controller and all the connected units with a balanced cable of good quality.
•Both XLR-3pin and XLR-5pin connectors are used, however XLR-3pin is more popular because these
cables are compatible with balanced audio cables.
•Pin layout XLR-3pin: Pin1 = GND ~ Pin2 = Negative signal (-) ~ Pin3 = Positive signal (+)
•Pin layout XLR-5pin: Pin1 = GND ~ Pin2 = Negative signal (-) ~ Pin3 = Positive signal (+) ~ Pins4+5
not used.
•To prevent strange behavior of the light effects, due to interferences, you must use a
90Ω to 120Ω terminator at the end of the chain. Never use Y-splitter cables, this
simply won’t work!
•Make sure that all units are connected to the mains.
•Each light effect in the chain needs to have its proper starting address so it knows which commands from
the controller it has to decode.
ELECTRICAL INSTALLATION VIA WIRED ETHERNET IN/OUT:
Art-Net is nothing more than a protocol for transmitting DMX512 over an Ethernet network, developed by
Artistic Licence Engineering (UK) Ltd. Thanks to the much bigger bandwidth it is possible to send more than
256 DMX-universes in one time.
This projector can be connected in such Ethernet network using routers, switches etc. The network topology
is exactly the same as for a normal PC-network. However, IP-addresses cannot be obtained via DHCP: see
the explanations in the chapter “setup menu” on how to manually setup the IP-address, Net Mask and choose
the desired DMX-universe. Also the sACN protocol is supported.
IMPORTANT NOTE: this projector has both Ethernet input and output so you can daisy chain several units.
However the number of units in one chain should be limited to ±10 units to avoid unwanted signal delays. In
bigger installations you should use the “STAR-topology” using Ethernet switches (or a combination of both).

ENGLISH
USER MANUAL
BRITEQ® 14/24 BTX-SUPREME HYBRID
•Internally the selected DMX-universe is treated as a normal DMX-signal so further setup of the DMX-
address, channel mode etc. should be done as usual.
•Thanks to the internal Art-Net node all 512 channels of the selected DMX-universe are automatically
converted from Art-Net to the DMX-output: they can be used to control other DMX-equipment:
ELECTRICAL INSTALLATION USING WIRELESS DMX:
Here we also have different options.
OPTION 1: completely wireless
See the previous chapter to learn how to setup the wireless DMX functions. In this case the W-DMX transmitter
send the wireless DMX signal to all the projectors.
OPTION 2: combined wireless + wired DMX
See the previous chapter to learn how to set up the wireless DMX functions. In this case, a W-DMX transmitter
sends the wireless DMX signal to the first device. This device is the first in a wired DMX chain and acts as a
wireless DMX receiver to transfer the entire DMX universe to the other DMX units.

ENGLISH
USER MANUAL
BRITEQ® 15/24 BTX-SUPREME HYBRID
DMX CHARTS
Two different DMX channels modes are available: ST. (Standard) + EX. (Extended)
ST
EX.
Function
Values
REMARKS
1
1
Pan
000
-
255
Pan Movement(540/630)
2
2
Pan fine
000
-
255
Pan Fine
3
3
Tilt
000
-
255
Tilt Movement(270)
4
4
Tilt fine
000
-
255
Tilt Fine
5
Pan/Tilt Speed
000
-
255
Pan/Tilt Fast -> Slow
5
6
Dimmer
000
-
255
Intensity 0 to 100%
7
Dimmer Fine
000
-
255
Dimmer Intensity Fine
6
8
Strobe functions
Shutter / Strobe：
000
-
005
shutter closed
006
-
010
shutter open
011
-
087
Slow to fast strobe
088
-
090
shutter open
091
-
167
Slow to fast random strobe
168
-
170
shutter open
171
-
247
Slow to fast pulse effect
248
-
255
shutter open
7
9
Cyan
0
-
255
0% to 100%
10
Cyan Fine
0
-
255
0% to 100%
8
11
Magenta
0
-
255
0% to 100%
12
Magenta Fine
0
-
255
0% to 100%
9
13
Yellow
0
-
255
0% to 100%
14
Yellow Fine
0
-
255
0% to 100%
10
15
Colour Wheel 1
Color Wheel：
000
-
005
White
PROPORTIONAL positioning of the
colors.
Channel "Colour Wheel Fine" used
to tune the positions.
009
Deep Red
018
Deep Blue
027
Yellow
036
Magenta
045
Green
054
Lavender
063
Cyan
072
Amber
081
Mint
090
Pink
099
Orange
108
CTO 3200K
117
Congo Blue
118
-
120
White
FULL colors shown
121
-
124
Deep Red
125
-
128
Deep Blue
129
-
132
Yellow
133
-
136
Magenta
137
-
140
Green
141
-
144
Lavender
145
-
148
Cyan
149
-
152
Amber
153
-
156
Mint
157
-
160
Pink
161
-
164
Orange
165
-
168
CTO 3200K
169
-
172
Congo Blue
173
-
176
White
177
-
215
Color Wheel rot. FAST → SLOW, CW
216
-
216
Color Wheel rot. Stop
217
-
255
Color Wheel rot. SLOW → FAST, CCW

ENGLISH
USER MANUAL
BRITEQ® 16/24 BTX-SUPREME HYBRID
16
Colour Wheel Fine
000
-
255
fine positioning for proportional colors
Works only for color wheel set to
values 000→117
11
17
GoboWheel 1
(fixed)
GoboWheel 1：FIXED GOBOS
Standard GOBOs: see further
000
-
005
Open
006
-
011
Gobo 1
012
-
017
Gobo 2
018
-
023
Gobo 3
024
-
029
Gobo 4
030
-
035
Gobo 5
036
-
041
Gobo 6
042
-
047
Gobo 7
048
-
053
Gobo 8
054
-
059
Gobo 9
060
-
065
Gobo 10
066
-
071
Gobo 11
072
-
077
Gobo 12
078
-
083
Gobo 13
084
-
095
Open
096
-
101
Gobo 1 shake (slow-fast)
102
-
107
Gobo 2 shake (slow-fast)
108
-
113
Gobo 3 shake (slow-fast)
114
-
119
Gobo 4 shake (slow-fast)
120
-
125
Gobo 5 shake (slow-fast)
126
-
131
Gobo 6 shake (slow-fast)
132
-
137
Gobo 7 shake (slow-fast)
138
-
143
Gobo 8 shake (slow-fast)
144
-
149
Gobo 9 shake (slow-fast)
150
-
155
Gobo 10 shake (slow-fast)
156
-
161
Gobo 11 shake (slow-fast)
162
-
167
Gobo 12 shake (slow-fast)
168
-
173
Gobo 13 shake (slow-fast)
174
-
192
Open
193
-
223
Gobo Wheel rot. FAST → SLOW CW
224
-
224
Gobo Wheel rot. Stop
225
-
255
Gobo Wheel rot. SLOW → FAST CCW
12
18
GoboWheel 2
(rotating)
GoboWheel 2：ROTATING GOBOS
Standard GOBOs: see further
000
-
002
Beam Mode
003
-
004
Spot Mode
005
-
006
Gobo 1 - Index
007
-
008
Gobo 2 - Index
009
-
010
Gobo 3 - Index
011
-
012
Gobo 4 - Index
013
-
014
Gobo 5 - Index
015
-
016
Gobo 6 - Index
017
-
018
Gobo 7 - Index
019
-
020
Gobo 8 - Index
021
-
022
Gobo 9 - Index
023
-
024
Open - no gobo
025
-
026
Gobo 1 - Rotation
027
-
028
Gobo 2 - Rotation
029
-
030
Gobo 3 - Rotation
031
-
032
Gobo 4 - Rotation
033
-
034
Gobo 5 - Rotation
035
-
036
Gobo 6 - Rotation
037
-
038
Gobo 7 - Rotation
039
-
040
Gobo 8 - Rotation
041
-
042
Gobo 9 - Rotation
043
-
044
Open - no gobo
045
-
052
Gobo 1 shake (slow-fast) - Index
053
-
060
Gobo 2 shake (slow-fast) - Index
061
-
068
Gobo 3 shake (slow-fast) - Index
069
-
076
Gobo 4 shake (slow-fast) - Index

ENGLISH
USER MANUAL
BRITEQ® 17/24 BTX-SUPREME HYBRID
077
-
084
Gobo 5 shake (slow-fast) - Index
085
-
092
Gobo 6 shake (slow-fast) - Index
093
-
100
Gobo 7 shake (slow-fast) - Index
101
-
108
Gobo 8 shake (slow-fast) - Index
109
-
116
Gobo 9 shake (slow-fast) - Index
117
-
119
Open - no gobo
120
-
127
Gobo 1 shake (slow-fast) - Rotation
128
-
135
Gobo 2 shake (slow-fast) - Rotation
136
-
143
Gobo 3 shake (slow-fast) - Rotation
144
-
151
Gobo 4 shake (slow-fast) - Rotation
152
-
159
Gobo 5 shake (slow-fast) - Rotation
160
-
167
Gobo 6 shake (slow-fast) - Rotation
168
-
175
Gobo 7 shake (slow-fast) - Rotation
176
-
183
Gobo 8 shake (slow-fast) - Rotation
184
-
191
Gobo 9 shake (slow-fast) - Rotation
192
-
194
Open - no gobo
195
-
224
Gobo Wheel rot. FAST → SLOW, CW
225
-
225
Gobo Wheel rot. Stop
226
-
255
Gobo Wheel rot. SLOW → FAST, CCW
13
19
Gobo 2 Rotation /
Index
000
-
255
Gobo2 Index position
used while GoboWheel2 is set to:
005→022 & 045→116
000
-
002
Gobo2 Rot. Off
used while GoboWheel2 is set to:
025→042 & 120→191
003
-
128
Gobo2 Rotation, FAST → SLOW, CW
129
129
Gobo2 Rotation Stop
130
-
255
Gobo2 Rotation, SLOW → FAST, CCW
14
20
Gobo 2 Rotation /
Index fine
0
-
255
Gobo2 Rotation / Index fine
15
21
Animation
Animation:
000
-
002
Wheel Rot. Off
003
-
128
Wheel Position 0 → 540°
129
-
191
Wheel rot. FAST → SLOW, CW
192
-
192
Wheel rot. Stop
193
-
255
Wheel rot. SLOW → FAST, CCW
22
Animation Fine
000
-
255
0% to 100%
16
23
PrismWheel1
PrismWheel1:
000
-
007
no Prism
008
-
038
Prism A: rotating cylindrical prism
039
-
069
Prism B: rotating 6-facet circular prism
070
-
100
Prism C: rotating 4-facet linear prism
101
-
131
Prism D: rotating 4-facet circular prism
132
-
162
Prism A: indexed cylindrical prism
163
-
193
Prism B: indexed 6-facet circular prism
194
-
224
Prism C: indexed 4-facet linear prism
225
-
255
Prism D: indexed 4-facet circular prism
17
24
Prism1
rotation/index
Prism1 rotation / indexing：
000
-
127
Prism Rotation, FAST → SLOW, CW
used while Prism wheel1 is set to
values 008 → 131
128
-
128
Prism Rotation Stop
129
-
255
Prism Rotation, SLOW → FAST, CCW
000
-
255
Prism Position 0 ... 540°
used while Prism wheel1 is set to
values 132 → 255
25
Prism1
rotation/index fine
000
-
255
0% to 100%
18
26
PrismWheel2
PrismWheel2:
000
-
007
no Prism
008
-
038
Prism E: rotating 6-facet linear prism
039
-
069
Prism F: rotating 8-facet circular prism
070
-
100
Prism G: rotating 16-facet circular prism
101
-
131
Prism H: rotating 32-facet circular prism
132
-
162
Prism E: indexed 6-facet linear prism
163
-
193
Prism F: indexed 8-facet circular prism
194
-
224
Prism G: indexed 16-facet circular prism
225
-
255
Prism H: indexed 32-facet circular prism

ENGLISH
USER MANUAL
BRITEQ® 18/24 BTX-SUPREME HYBRID
19
27
Prism2
rotation/index
Prism2 rotation / indexing：
000
-
127
Prism Rotation, FAST → SLOW, CW
used while Prism wheel1 is set to
values 008 → 131
128
-
128
Prism Rotation Stop
129
-
255
Prism Rotation, SLOW → FAST, CCW
000
-
255
Prism Position 0 ... 540°
used while Prism wheel1 is set to
values 132 → 255
28
Prism2
rotation/index fine
000
-
255
0% to 100%
20
29
Zoom
000
-
255
narrow to wide
30
Zoom fine
000
-
255
narrow to wide
21
31
Focus
000
-
255
0% to 100%
32
Focus fine
000
-
255
0% to 100%
22
33
Frost 1
000
-
255
0% to 100%
23
34
Frost 2
000
-
255
0% to 100%
24
35
Control channel
Device settings：
DMX settings override the
settings in the setup menu !
000
-
105
No function
106
-
110
Blackout while Moving on
Hold 3s
111
-
115
Blackout while Moving off
Hold 5s
116
-
120
Display On
Hold 3s + strobe channel closed,
value set to 000-005
121
-
125
Display Off
Hold 3s + strobe channel closed,
value set to 000-005
126
-
130
Fan Mode = auto
Hold 3s
131
-
135
Fan Mode = full
Hold 3s
136
-
140
Standard CRI
Hold 3s + strobe channel closed,
value set to 000-005
141
-
145
High CRI
Hold 3s + strobe channel closed,
value set to 000-005
146
-
150
Lamp On
Hold 3s
151
-
155
Lamp Off
Hold 5s
156
-
160
FULL: lamp @ 470W
Hold 3s + strobe channel closed,
value set to 000-005
161
-
165
ECO: lamp @360W
Hold 3s + strobe channel closed,
value set to 000-005
166
-
170
Reset Pan/Tilt
Hold 3s
171
-
175
Reset Color wheel
Hold 3s
176
-
180
Reset CMY
Hold 3s
181
-
185
Reset Gobo + Animation wheels
Hold 3s
186
-
190
Reset Dimmer + Shutter
Hold 3s
191
-
195
Reset Prisms + Focus + Frost
Hold 3s
196
-
200
Reset All Functions
Hold 3s
201
-
255
No function
Note (*): by default function delay (is set to 3seconds: the selected function will only be active while the
corresponding DMX-value is received during at least 3seconds.