Britex TP6R User manual

MELBOURNE
Britex Place Mirra Crt
Bundoora VIC 3083
t(03) 9466 9000
e[email protected]om.au
SYDNEY
16 Northumberland Drv
Taren Point NSW 2229
t(02) 9531 2100
[e-mail]
PERTH
Unit 1/8 Principal Link
Malaga WA 6090
t(08) 9249 5464
[e-mail]
BRISBANE
19 Manilla St
East Brisbane QLD 4169
t(07) 3363 2400
e[email protected]om.au
ADELAIDE
The Britex Group
SA State Office
t1300 764 744
e[email protected]om.au
Installation
Guide
TP6R &
TP6R-SS
Refrigerated Accessible
Drinking Trough
TP6R/TP6R-SS Installation Guide | QID 1.7 | Rev 1 | 22 Feb 2023
700 from FFL
To Comply With AS1428.2
Optional Bottle Filler
Chiller Unit
Pressure
Relief
Valve
Rear Fixing Holes
Offset Fixing Bracket
Pressure relief valve may discharge a small volume of water if excess pressure is relieved
A connection to the branch drain with the use of a tundish can be used to prevent any unwanted spillage
2000
500
207
290 210
50mm Waste Outlet
550 300
TP6R-SS
Installation
A3
SHEET 2 OF 2
SCALE:1:20
TITLE:
DO NOT SCALE DRAWING
DATE
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN MILLIMETERS
APPV'D
CHK'D
DRAWN
REVISION
Britex Metal Products Co. Pty Ltd.
ACN: 004 309 737
2 Mirra Ct, Bundoora Victoria 3083
P: 03 9466 9000 F: 03 9466 9044
britex.com.au [email protected]
Drawing:
AW
20/02/23
A
SD-6073.2

Australia’s Finest Stainless | britex.com.au
About
General Services
Preparation and Completion Notes
The BRITEX Accessible Drinking Trough is particularly suited to school and university
projects. The AS1428 compliant Drinking Troughs include pre-plumbed Drink Safe™ low
lead water efficient push button drink bubblers with bacteria and sunlight resistant rubber
compound mouth pieces for added safety in the event users are bumped whilst drinking. The
fully welded stainless steel troughs, rounded corners both internally and externally ensure
easy cleaning and provide added safety in high traffic areas. Accessible drinking stations can
be supplied at either the left or right-hand end. Available in refrigerated models. (TP6R)
1. Water supply (500 kPa Max) - Incorporating isolator valve, inline filter and pressure
reducing valve, (not Supplied), terminated with a M1/2” BSP to 10mm PE (push in) straight
adapvtor fitting (supplied).
2. Branch drain - required to receive a discharge pipe from a 50mm waste outlet.
3. Relief valve discharge – A pressure relief valve is located on the refrigerated chiller unit
that may discharge a small volume of volume of water, if excess pressure is relieved. A
connection to the branch drain with the use of a tundish can be provided to prevent any
unwanted spillage.
4. 220-240 V GPO – Required to receive a 10 amp male power cable plug from the
refrigerated chiller unit.
2
TP6R/TP6R-SS Installation Guide | QID 1.7 | Rev 1 | 22 Feb 2023
Contractors please note: Ideally, stainless steel troughs should be installed after all other
building activities that could cause contamination to the surface of the stainless steel have
been completed. These activities include: Using proprietary building mortar removers
containing hydrochloric acid. Welding, cutting and grinding that may ‘spray’ carbon steel and
iron particles onto the stainless steel surface.
1. Remove trough from box packaging and inspect for any damage before beginning
installation process. Do not remove the protective film from the stainless steel at this stage.
2. Confirm all requested details (trough length, waste position, tap holes etc.) are correct.
3. If trough is damaged in transit or if any details are not as requested, do not install the trough.
Notify Britex immediately.
Installation of this unit must be in accordance with AS/NZS 3500.1 and AS/NZS 3500.2
For further support and after-sales care, please contact Britex.
IMPORTANT
ALL SERVICE TO BE PERFORMED BY AN AUTHORISED SERVICE PERSON

Australia’s Finest Stainless | britex.com.au
TP6R and TP6R-SS Drawing
3
TP6R/TP6R-SS Installation Guide | QID 1.7 | Rev 1 | 22 Feb 2023
700 from FFL
To Comply With AS1428.2
Optional Bottle Filler
Chiller Unit
Pressure
Relief
Valve
Rear Fixing Holes
Offset Fixing Bracket
Pressure relief valve may discharge a small volume of water if excess pressure is relieved
A connection to the branch drain with the use of a tundish can be used to prevent any unwanted spillage
(Recommended
Plumbing Not Included)
-Pressure Limiting Valve
-Strainer
-Stop Valve
290 210
209
500
50mm Waste Outlet
550 300
TP6R-SS
Installation
A3
SHEET 2 OF 5
SCALE:1:20
TITLE:
DO NOT SCALE DRAWING
DATE
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN MILLIMETERS
APPV'D
CHK'D
DRAWN
REVISION
Britex Metal Products Co. Pty Ltd.
ACN: 004 309 737
2 Mirra Ct, Bundoora Victoria 3083
P: 03 9466 9000 F: 03 9466 9044
britex.com.au [email protected]
Drawing:
AW
20/02/23
A
SD-6073.2
700 from FFL
To Comply With AS1428.2
Optional Bottle Filler
Chiller Unit
Pressure
Relief
Valve
Rear Fixing Holes
Offset Fixing Bracket
Pressure relief valve may discharge a small volume of water if excess pressure is relieved
A connection to the branch drain with the use of a tundish can be used to prevent any unwanted spillage
2000
500
207
290 210
50mm Waste Outlet
550 300
TP6R-SS
Installation
A3
SHEET 2 OF 2
SCALE:1:20
TITLE:
DO NOT SCALE DRAWING
DATE
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN MILLIMETERS
APPV'D
CHK'D
DRAWN
REVISION
Britex Metal Products Co. Pty Ltd.
ACN: 004 309 737
2 Mirra Ct, Bundoora Victoria 3083
P: 03 9466 9000 F: 03 9466 9044
britex.com.au [email protected]
Drawing:
AW
20/02/23
A
SD-6073.2
Accessible Drinking Trough Parts
Joggle Strip 1.
Drinking Trough 2.
Left Hand Panel 3.
Right Hand Panel 4.
Front Panel Frame
5.
Refrigerated Chiller Unit
6.
Removable Front Panel
7.
1
2
3
4
5
6
7
TP6R
Installation
A3
SHEET 1 OF 5
SCALE:1:20
TITLE:
DO NOT SCALE DRAWING
DATE
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN MILLIMETERS
APPV'D
CHK'D
DRAWN
REVISION
Britex Metal Products Co. Pty Ltd.
ACN: 004 309 737
2 Mirra Ct, Bundoora Victoria 3083
P: 03 9466 9000 F: 03 9466 9044
britex.com.au [email protected]
Drawing:
AW
20/02/23
A
SD-6073.1
TP6R and TP6R-SS parts:
1. Joggle Strip
2. Drinking Trough
3. Left Hand Panel
4. Right Hand Panel
5. Front Panel Frame
6. Refrigerated Chiller Unit
7. Removable Front Panel

Australia’s Finest Stainless | britex.com.au
Installation Instructions
4
TP6R/TP6R-SS Installation Guide | QID 1.7 | Rev 1 | 22 Feb 2023
Steps 1-4
Step 5
Steps 6-7
TP6R
Installation
A3
SHEET 3 OF 5
SCALE:1:20
TITLE:
DO NOT SCALE DRAWING
DATE
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN MILLIMETERS
APPV'D
CHK'D
DRAWN
REVISION
Britex Metal Products Co. Pty Ltd.
ACN: 004 309 737
2 Mirra Ct, Bundoora Victoria 3083
P: 03 9466 9000 F: 03 9466 9044
britex.com.au [email protected]
Drawing:
AW
24/02/23
A
SD-6073.3
Steps 1-4
Step 5
Steps 6-7
TP6R
Installation
A3
SHEET 3 OF 5
SCALE:1:20
TITLE:
DO NOT SCALE DRAWING
DATE
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN MILLIMETERS
APPV'D
CHK'D
DRAWN
REVISION
Britex Metal Products Co. Pty Ltd.
ACN: 004 309 737
2 Mirra Ct, Bundoora Victoria 3083
P: 03 9466 9000 F: 03 9466 9044
britex.com.au [email protected]
Drawing:
AW
24/02/23
A
SD-6073.3
1. Mark vertical centreline on wall where
trough is to be installed.
2. Mark a level horizontal line 295mm
(for 300mm splash back model) above
desired trough height from FFL.
E.G. to comply with AS1428, operable
trough height from finished floor level
must be 700mm, making horizontal line
to be marked at 995mm from finished
floor level.
3. Line top of joggle strip (1) up with the
horizontal line and mark fixing points.
Insert appropriate wall fixings and
secure joggle to wall.
4. Place trough (2) onto wall, hooking
rear trough fold onto the joggle,
suspending it from wall.
5. Assemble L/R end panels (4),(5) to underside of
trough using supplied fixing screws.
1
2

Australia’s Finest Stainless | britex.com.au
Installation Instructions
5
TP6R/TP6R-SS Installation Guide | QID 1.7 | Rev 1 | 22 Feb 2023
Steps 1-4
Step 5
Steps 6-7
TP6R
Installation
A3
SHEET 3 OF 5
SCALE:1:20
TITLE:
DO NOT SCALE DRAWING
DATE
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN MILLIMETERS
APPV'D
CHK'D
DRAWN
REVISION
Britex Metal Products Co. Pty Ltd.
ACN: 004 309 737
2 Mirra Ct, Bundoora Victoria 3083
P: 03 9466 9000 F: 03 9466 9044
britex.com.au [email protected]
Drawing:
AW
24/02/23
A
SD-6073.3
6. Assemble front panel frame
(5) between end panels using
supplied fixing screws.
7. Ensure parts are flush and
square. Appropriate wall
fixings can now be used to
secure end panels to wall.
3
Step 8
Step 15
TP6R
Installation
A3
SHEET 4 OF 5
SCALE:1:20
TITLE:
DO NOT SCALE DRAWING
DATE
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN MILLIMETERS
APPV'D
CHK'D
DRAWN
REVISION
Britex Metal Products Co. Pty Ltd.
ACN: 004 309 737
2 Mirra Ct, Bundoora Victoria 3083
P: 03 9466 9000 F: 03 9466 9044
britex.com.au [email protected]
Drawing:
AW
24/02/23
A
SD-6073.4
8. The CWU-4 refrigerated
chiller unit (6) can now be
installed within the confines
of the trough shroud. Secure
brackets to wall using
appropriate wall fixings then
place unit on brackets and
secure using supplied fixing
screws.
Steps 9-14: Installing
Refrigeration Unit
4