BRITISH RECYCLED PLASTIC BRADSHAW PICNIC TABLE User manual

Unit 8C, Top Land Country Business Park
Cragg Road, Mytholmroyd, Hebden Bridge,
West Yorkshire, HX7 5RW
Phone: [phone]
Mail: [email protected]
BRADSHAW PICNIC TABLE
Please contact us if you need any further
help or information.
22-10-2021
BEGIN ASSEMBLY WITH TABLETOP
TURNED UPSIDE-DOWN.
FIX A-FRMAES TO TABLETOP USING 70mm SCREWS
THROUGH PRE-DRILLED HOLES IN FIXING BARS.
BEFORE FULLY TIGHTENING ALL SCREWS, CHECK
THAT THE SEATS ARE SQUARE BY MEASURING
ACROSS THE DIAGONALS. BOTH DIAGONAL
MEASUREMENTS SHOULD BE EQUAL.
ENSURE END A-FRAMES HAVE
THE SEAT FIXING BLOCKS FACING
INWARDS, AS SHOWN. ENSURE
ALSO THAT THE CROSS-BAR OF
THE MIDDLE A-FRAME IS FACING
THE CROSS-BAR OF THE
NEAREST END A-FRAME.

Unit 8C, Top Land Country Business Park
Cragg Road, Mytholmroyd, Hebden Bridge,
West Yorkshire, HX7 5RW
Phone: [phone]
Mail: [email protected]
BRADSHAW PICNIC TABLE
Please contact us if you need any further
help or information.
22-10-2021
TURN PICNIC TABLE OVER ONTO FEET AND FIX
PRE-ASSEMBLED SEATS USING 70mm SCREWS
THROUGH PRE-DRILLED HOLES IN SEAT FIXING BLOCKS.
ENSURE CHAMFERED ENDS OF
THE SEAT FIXING BLOCKS ARE
FACING OUTWARDS, AS SHOWN.
BEFORE FULLY TIGHTENING ALL SCREWS, CHECK THAT THE
SEATS ARE SQUARE BY MEASURING ACROSS THE DIAGONALS.
BOTH DIAGONAL MEASUREMENTS SHOULD BE EQUAL.