BroaMan DiViNe Route 66 User manual

DiViNe – Digital Video Network
Operating Manual
Rev. 1.2
Operating Manual for
DiViNe Route 66
Digital Video Network device with Optocore and SANE
© Copyright 2017 All rights reserved
BROAMAN GmbH
Lohenstr. 8
82166 Munich-Gräfelfing
Germany

DiViNe Route 66 2 / 18 rev. 1.2
Important Safety Instructions
•Please read this manual carefully.
•Please keep this operating manual in a safe place.
•Heed all warnings.
•Follow all instructions.
•This device may only be used in accordance to the information provided in this operating
manual. Ensure that all recommendations, especially the safety recommendations as detailed
in this operating manual, are followed before and during the usage of the device.
•Do not use this device near water, for example, in humid or damp rooms.
•Clean only with a dry cloth.
•Do not block or cover any ventilation slits. Install the device in accordance with the operating
manual.
•Do not install or place the device near any heat source such as radiators, power-amplifiers, or
any other heat producing equipment.
•Protect the power cord from being stepped on, crushed, pinched or damaged in any other
way. Pay special attention to plugs and sockets of the device.
•Do not place this device on an unstable table, tripod, cart, etc. The device may fall, causing
serious damage to the device.
•The device can be disconnected from the power supply by pulling the plug. These must be
freely accessible at all times. The device should be disconnected during lightening storms or
when unused for long periods of time.
•The device must be grounded; any disconnection of the grounding is not permitted.
•The internal components of the switched-mode power supplies operate at very high voltages.
Coming into contact with them can lead to considerable electric shock, which may result in
death.
•Only use attachments specified by the manufacturer.
•This device contains no user serviceable parts: only refer to authorised, qualified service
personnel for any servicing.
•Your warranty will be voided if you tamper with the internal components.

DiViNe Route 66 3 / 18 rev. 1.2
Purchaser Information
•Operating Manual
Please read this manual – if you call for technical support, we will assume that you have already done
so. Study the operating manual carefully in order to familiarise yourself with the device and its
operation. It contains vast amounts of information and tips for the proper use of the device.
It cannot be excluded that this operation manual may show typographical mistakes or misprints; it is
however regularly revised.
Modifications, which serve the purpose of technical improvement of the device, may be carried out
without prior notification.
•Transport and Shipping
Always ensure the careful handling of the device. If possible, transport or shipping should always
occur in special, shock-absorbing transport cases. If these are not available, we recommend well-
padded packaging such as the coated carton in which the device was delivered.
We strongly advise against the use of simple flight-cases without rack-in-rack mounting.
•Environments
This device can be used in E1, E2, E3, E4, or E5 environments (as listed below) according to the
harmonised European standards EN55103-1 and EN55103-2 “Electromagnetic compatibility –
Product family standard for audio, video and audio-visual and entertainment lighting control apparatus
for professional use”
E1-Residental
E2-Commercial and light industrial
E3-Urban outdoors
E4-Controlled EMC environment e.g. broadcast and TV-studio
E5-Heavy industry
The product is intended for use in moderate climates.
•Ventilation
Do not block or cover any ventilation slits. Install the device in accordance with the operating manual.
Leave sufficient ventilation space around the units (at least approx. 200 mm ≡7,87" free space
behind the rear-panel) and care to allow free air movement near the ventilation-slits on both sides of
the device. Keep the rear of the rack open during operation. Do not set up the device close to
equipment producing a lot of heat, for example power-amplifiers. Leave enough space (minimum
½RU) to any heat emitting device in the same rack. A Route 66 device may be placed on top or
beneath other BroaMan products, without additional space.
•Water and Moisture etc.
To prevent fire or shock hazard do not expose the device to the effects of direct sunlight, dust, water,
or rain during operation or storage.
•Cleaning
Only use a dry linen cloth to clean the device. If the unit is very dirty, moisten a cloth using a little
water and a small amount of household detergent. Never use cleansing agents containing solvents to
clean the device.
•Operating and Storage Temperature
Operating temperature: -20°C …50°C ≡-4°F …122°F; ensure proper ventilation
Storage temperature: -20°C …60°C ≡-4°F …140°F

DiViNe Route 66 4 / 18 rev. 1.2
•Power Supply
The device can be disconnected from the power supply by pulling the plug. These must be freely
accessible at all times. The device should be disconnected during lightning storms or when unused
for long periods of time. The switched-mode power supplies operate with very high voltages. Coming
into contact with them can lead to considerable electric shock, which may result in death.
Never disconnect the main plug by pulling the cable, always pull the plug itself.
Power-supply cords should be routed in such a way that they are not likely to be walked on, crushed,
pinched, or damaged in any other way. Pay special attention to the plugs and the sockets of the
device.
Replace a damaged power cable immediately.
The device must be grounded; any disconnection of the grounding is not permitted. Always ensure
the correct grounding of the device via the main plug. Never cover the grounding terminal of the plug
by means of insulation material!
•Fuse
There exists no fuse inside the device. The power supplies are protected for overload conditions due
to their circuitry.
•Lightning
For additional protection of this device during lightning storms, or when it is left unattended and
unused for a long period of time, unplug the power cord. This will prevent damage to the device due
to lightning and power line surges. Disconnection from the mains power supply can only be achieved
by removing the plug from the mains socket.
•Interference by means of external objects and/or liquids with the device
Never push objects of any kind into the device through openings in the casing. They may come into
contact with dangerous voltage points or short out parts that could result in a fire or electric shock.
Never spill liquid of any kind on the device.
•Cables and Accessories
Only use attachments specified by the manufacturer.
Only use high quality cable to connect the device. For the optical data connection, you should
exclusively use the specified optical waveguide cables. If not in use, ensure that the optical
connectors of both the device and waveguide are covered with the provided caps.
Do not place this device on an unstable table, tripod, cart, etc. The device may fall, which can cause
injury and serious damage to the device. Any mounting of the device should follow the manufacturer’s
instructions, and should use mounting accessories recommended by the manufacturer.
•Servicing
Do not attempt to service this device yourself.
This device contains no user serviceable parts: only refer to authorised, qualified service personnel
for any servicing.
The opening of the device is not required for operation as there are no user serviceable components
located inside the device. The operation of an opened device is not permitted. It can lead to damage
of components due to the absence of required ventilation. The device may not be serviced, altered or
modified without authorisation from BroaMan or an BroaMan authorised distributor / dealer. Only
qualified service personnel may carry out repair and maintenance work. The warranty will be voided if
unauthorised maintenance has occurred.

DiViNe Route 66 5 / 18 rev. 1.2
CE/FCC Conformity
This document confirms that the product Route66 bearing the CE (Communauté Européenne)label meets all
requirements in the EMC directive 2004/108/EG laid down by the Member States Council for adjustment of legal
requirements. Furthermore the product complies with the rules and regulations of the low-voltage directive
2006/95/EG and the Restriction of Hazardous Substances Recast Directive 2011/65/EU (RoHS 2). This product
bearing the CE label complies with the following standards, ratified by CENELEC (Comité Européen de
Normalisation Electrotechnique):
Electromagnetic compatibility – Product family standard for audio, video, audio-visual and
entertainment lighting control apparatus for professional use
EN 55103-1, Emission
EN 55103-2, Immunity
EN 60065, Safety requirements
FCC notice
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communication. Operation of this equipment in a residential area is likely to
cause harmful interference, in which case you will be required to correct the interference at his own expense.
Changes or modifications not expressly approved by Broadcast Manufactur GmbH and Clear-Com, LLC, an HME
company could void the user’s authority to operate this equipment.
Industry Canada Compliance Statement
This Class[A] digital device complies with Canadian ICES-003.
Avis de conformité à la réglementation d'Industrie Canada
Cet appareil numérique de la class[A] est conforme à la norme NMB-003 du Canada.
The authorised declaration and compatibility certification lies with the manufacturer and can be viewed on
request. Responsible as manufacturer is:
Broadcast Manufactur GmbH, Lohenstr. 8, 82166 Munich-Gräfelfing, Germany
Represented by Marc Brunke, Technical Director
N.B. The awarding of the CE label confirms the compliance with legal directives issued for the manufacture and
marketing of electronic and electrical devices. As such the CE label is not a "seal of quality" but rather proof that
the device bearing the CE label is conform with the electromagnetic compatibility standards laid down in the
above named testing regulations.
Munich, 05.06.2014
Marc Brunke

DiViNe Route 66 6 / 18 rev. 1.2
DiViNe Route 66 – Digital Video Network with Optocore and SANE
Table of Contents
Important Safety Instructions.....................................................................................................................................2!
Purchaser Information ...............................................................................................................................................3!
Device Description.....................................................................................................................................................7!
Front Panel ................................................................................................................................................................8!
2RU frame......................................................................................................................................................8!
Rear Panel – 2RU frame .........................................................................................................................................10!
Device Details..........................................................................................................................................................11!
Video BNC Ports ..........................................................................................................................................11!
Video Fiber Ports..........................................................................................................................................11!
Optocore Fiber Optic Connection.................................................................................................................11!
SANE Ports ..................................................................................................................................................11!
RS485 Auxiliary Ports ..................................................................................................................................11!
Word Clock...................................................................................................................................................11!
Transmission Delay......................................................................................................................................11!
Power Supply ...............................................................................................................................................11!
Control .....................................................................................................................................................................12!
Connectors and Cables ...........................................................................................................................................12!
Optical Connection.......................................................................................................................................12!
SD/HD/3G Ports...........................................................................................................................................12!
SANE Ports ..................................................................................................................................................12!
Auxiliary Ports ..............................................................................................................................................12!
RS232-Connection.......................................................................................................................................12!
Connector Hood Quality...............................................................................................................................12!
USB-Connection...........................................................................................................................................12!
LAN-Connection...........................................................................................................................................12!
Word Clock-Connection ...............................................................................................................................12!
Mains-Connection ........................................................................................................................................12!
Connection Example ...............................................................................................................................................13!
Connection Tables...................................................................................................................................................14!
Technical Specifications ..........................................................................................................................................15!
Dimensions and Weight...........................................................................................................................................16!
Warranty and Liability ..............................................................................................................................................17!
Shipping Contents ...................................................................................................................................................17!
Printed version of User Manual is available on a special demand. Please contact [email protected]
if printed version is required. ...................................................................................................................................17!
Company Information ..............................................................................................................................................18!

DiViNe Route 66 7 / 18 rev. 1.2
Device Description
Congratulations on your purchase of a DiViNe Route 66 - SD/HD/3G to fiber Video Router with Optocore and
SANE. The Route 66 series manual will quickly demonstrate its advantages and help to ease your day to day
workload in a professional audio visual environment.
DiViNe stands for Digital Video Network. It enables routing, repeating and transport of multiple professional video
signals over fiber infrastructure. DiViNe enables also multiplexing and demultiplexing video – distributing high
number of video channels through one cable.
DiViNe Route 66 is a customised product tailored to every single customer and project, which enables to send,
receive, multiplex, demultiplex and convert professional video signal. Additionally Route 66 offers interfaces for
well known Optocore and SANE audio and data networks. The device is configured by the manufacturer. Router
offers routing, repeating and converts the signal from electrical (BNC) to optical (fiber). Every single Route 66
product is different and customised to meet even the most sophisticated requirements.
Route board is capable of handling up to 66 video channels.
Each Route66 is being delivered in 2RU frame which is equipped with up to 24 BNC ports for SD/HD/3G video,
20 duplex LC fiber ports, and additionally up to 36 simplex LC fiber ports..
Additionally Route 66 is equipped with standard FX board, known from Optocore R-Series product range. It
enables transport of up to 1024 audio inputs (unlimited number of outputs) by redundant fiber LC links, 64 audio
channels on Cat5-based SANE network, 4 RS485/422 channels, two LAN ports and synchronisation with the
external devices by Word Clock input and output.
Route 66 can be also used as Optocore router, enabling a star topology for the ring-based Optocore concept.
Front panel remains the same for every single hardware configuration of the Route 66 product; however the back
panel differs depending on the requirements. The concept layout remains the same for every use, but number of
interfaces may be changed. Following chapter describes the meaning of all LEDs on front panel and the layout of
interfaces in the back.

DiViNe Route 66 8 / 18 rev. 1.2
Front Panel
2RU frame
Word Clock LED: Indicates the selected word clock source:
INT: Internal word clock
BNC: External via BNC Input
AES: External via AES
Router status LED: Indicates that the device is set to work as:
Repeat33: 33 video channel repeater
Repeat66: 66 video channel repeater
Route33: 33 video channel router
Route66: 66 video channel router
ACT LED Signal status of channels 1-40:
LED ON: Signal is present
LED OFF: No signal is present
AUDIO LINK:
SL1: Communication is established via SANE 1 (rear panel)
SL2: Communication is established via SANE 2 (rear panel)
OL1: Communication is established via Optocore LINK 1 (rear panel)
OL2: Communication is established via Optocore LINK 2 (rear panel)
Master LED: Indicates the master unit
OPTO LED: Optocore communication is established
SANE LED: SANE communication is established
Device ID Display: Indicates the identification number of the device
HEALTH LED: Green: Power supply is correctly working, temperature is below the limit
PWR 1 LED: Power supply 1 is working correctly
PWR 2 LED: Power supply 2 is working correctly
USB plug and LED: USB connection for remote control via PC
Green: Indicates data activity

DiViNe Route 66 9 / 18 rev. 1.2
RS232 plug: D-Sub-9 RS232 connection for remote control and update via PC
LAN LINK:
S1: Ethernet communication is established via SANE 1 (rear panel)
S2: Ethernet communication is established via SANE 2 (rear panel)
UP: There is other device with physical Ethernet port enabled on the network
L1: Ethernet communication is established via LAN 1 (rear panel)
L2: Ethernet communication is established via LAN 2 (rear panel)
POWER / MUTE Mic Card Phantom Power / Output Card Mute
Sample rate LED: Yellow: 44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz

DiViNe Route 66 10 / 18 rev. 1.2
Rear Panel – 2RU frame
Video ports 1-12:Up to 12 SD/HD/3G Video ports configured by manufacturer as inputs or
outputs
Fiber ports 21-56:Up to 36 fiber ports with TX or RX. Each port can be configured by
manufacturer as transmitter/receiver of Video Link or Optocore Link for
Optocore Router
Video ports 13-24:Up to 12 SD/HD/3G Video ports configured by manufacturer as inputs or
outputs
POWER 1: Mains input for power supply 1 (100 …240 V)
POWER 2: Mains input for power supply 2 (100 …240 V)
Fiber SFP ports 1-20:Up to 20 user-changeable SFP fiber ports with TX and RX. Each port can be
configured by manufacturer as Video Link or Optocore Link for Optocore
Router
Word Clock IN: BNC Word clock input allows synchronization of Optocore devices to an
external word clock source
Word Clock OUT: BNC Word clock output for synchronization of external devices
SANE 1: SANE RJ-45 interface for data transmission + 100 Mbit Ethernet
SANE 2: SANE RJ-45 interface for data transmission + 100 Mbit Ethernet
LINK 1: Full-duplex, full bandwidth LC-type optical interface for data transmission
LINK 2: Full-duplex, full bandwidth LC-type optical interface for data transmission
RS485/GPIO plug: D-Sub-9 RS485 AUXILIARY PORT for data transmission
LAN 1: 100 Mbit RJ-45 Ethernet interface
LAN 2: 100 Mbit RJ-45 Ethernet interface