Brother Innov-is NX600 User manual

Computerized Sewing Machine
Operation Manual
CPS5XV[Y
GETTING READY
SEWING BASICS
UTILITY STITCHES
APPENDIX

Cover A
Enclosed Accessories
After opening the box, check that the following accessories are enclosed. If any item is missing or
damaged, contact your retailer.
Accessories
The following items should also be enclosed in the box.
Note
(For U.S.A. only)
zFoot controller: Model N5V This foot controller can be
used on this machine model NX-600.
zScrew of the presser foot holder (Part code: XA4813-
051).
zOrganized accessory tray (Part code: XC4489-051)
1. 2. 3. 4. 5. 6. 7. 8. 9.
10. 11. 12. 13. 14. 15. 16. 17. 18. 19.*
20. 21. 22. 23. 24. 25. 26. 27. 28. 29.
30. 31. 32. 33. 34. 35.
*75/11 2 needles
90/14 2 needles
90/14 2 needles: Ball point needle (gold colored)
No. Part Name Part Code No. Part Name Part Code
U.S.A. Others U.S.A. Others
1 Buttonhole foot "A" XC2691-051 19 Needle set X58358-051
2 Overcasting foot "G" XC3098-051 20 Twin needle X59296-051
3 Monogramming foot "N" X53840-351 21 Cleaning brush X59476-051
4 Zipper foot "I" X59370-051 22 Eyelet punch 135793-001
5 Zigzag foot "J" (on machine) XC3021-051 23 Screwdriver (large) X55467-051
6 Blind stitch foot "R" X56409-051 24 Screwdriver (small) X55468-051
7 Button fitting foot "M" 130489-001 25 Spool cap (large) 130012-054
8 Walking foot SA140 F033N (XC2214-002) 26 Spool cap (medium)(2) X55260-153
9 Quilting foot SA129 F005N (XC1948-002) 27 Spool cap (small) 130013-154
10 Stitch guide foot "P" SA160 F035 (XA8839-002) 28 Extra spool pin XC4654-051
11 Adjustable zipper/piping foot SA161 F036N (XC1970-002) 29 Spool net XA5523-050
12 Non stick foot SA114 F007N (XC1949-002) 30 Foot controller XC1154-051
13 Open toe foot SA147 F027N (XC1964-002) 31 Grid sheet set SA527 GS4 (XC4549-051)
14 1/4 inch quilting foot SA125 F001N (XC1944-002) 32 Knee lifter XA6941-052
15SidecutterSA177F054(XC3879-002)33Operation manualXC5427-051
16QuiltingguideSA132F016N(XC2215-002)34Quick reference guideXC4546-151,
XC5434-051
17 Seam ripper X54243-001 35 Hard case XC2360-152
18 Bobbin (4) SA156 SFB (XA5539-151)

Cover B
GETTING READYCONTENTS SEWING BASICS UTILITY STITCHES APPENDIX INDEX
Names of Machine Parts and Their Functions
The names of the various parts of the sewing machine and their functions are described below. Before
using the sewing machine, carefully read these descriptions to learn the names of the machine parts.
Front view
aThread guide plate
bThread guide cover
Pass the thread around the thread guide plate when
threading the upper thread.
cSpool pin
Place the spool on the spool pin.
dThread guide for bobbin winding
Pass the thread around this thread guide when winding
the bobbin thread.
eUpper cover
Open the upper cover to place the spool of thread on
the spool pin.
fBobbin winder
Use the bobbin winder when winding the bobbin.
gOperation panel
Select a stitch from those that appear in the operation
panel. (page Cover E)
hSewing speed controller
Use the sewing speed controller to adjust the sewing
speed.
iKnee lifter mounting slot
Plug the knee lifter into the knee lifter mounting slot.
jOperation buttons
Use the operation buttons to start the sewing machine
and automatically cut the thread. (page Cover D)
kFlat bed attachment with accessory compartment
Store presser feet and bobbins in the accessory
compartment of the flat bed attachment. When sewing
cylindrical pieces, remove the flat bed attachment.
lThread cutter
Pass the threads through the thread cutter to cut them.
mNeedle threader lever
Use the needle threader to thread the needle.
5
3
4
6
2
1
7
0
8
C
B
A
9

Cover C
GETTING READYCONTENTS SEWING BASICS UTILITY STITCHES APPENDIX INDEX
Needle and presser foot
section
aButtonhole lever
Lower the buttonhole lever when sewing buttonholes
and bar tacks.
bThread guide discs
Pass the thread through the thread guide discs when
using the needle threader to thread the needle.
cNeedle bar thread hook
Pass the upper thread through the needle bar thread
hook.
dNeedle plate
The needle plate is marked with guides for sewing
straight seams.
eBobbin cover/Shuttle
Remove the bobbin cover, and then insert the bobbin
into the shuttle.
fFeed dogs
The feed dogs feed the fabric in the sewing direction.
gPresser foot
The presser foot applies pressure consistently on the
fabric as the sewing takes place. Attach the appropriate
presser foot for the selected stitching.
hPresser foot holder
The presser foot is installed onto the presser foot holder.
Right-side/rear view
aPresser foot dial
Use the presser foot dial to adjust the amount of
pressure that the presser foot applies to the fabric.
bHandle
Carry the sewing machine by its handle when
transporting the machine.
cBalance wheel
Turn the balance wheel toward you to raise and lower
the needle to sew one stitch.
dAir vent
The air vent allows the air surrounding the motor to be
exchanged. Do not cover the air vent while the sewing
machine is being used.
eMain power switch
Use the main power switch to turn the sewing machine
on and off.
fFoot controller jack
Insert the plug on the end of the foot controller cable
into the foot controller jack.
gPower supply jack
Insert the plug on the power supply cord into the power
supply jack.
hFeed dog position switch
Use the feed dog position switch to lower the feed dogs.
Memo
zRefer to Cover B, D or E pages while you are
learning to use your machine.
1
23
4
5
6
7
8
2
3
5
6
4
7
8
1

Cover D
GETTING READYCONTENTS SEWING BASICS UTILITY STITCHES APPENDIX INDEX
Operation buttons
The operation buttons help you to easily perform various basic sewing machine operations.
aStart/stop button
Press the start/stop button to start or stop sewing. The
machine sews at a slow speed at the beginning of
sewing while the button is depressed. When sewing is
stopped, the needle is lowered in the fabric. For details,
refer to "Starting to sew" (page 48).
The button lights up in green, red or orange, depending
on how the sewing machine is being operated.
bReverse/reinforcement stitch button
Press the reverse/reinforcement stitch button to sew
reverse stitches or reinforcement stitches. Reverse
stitches are sewn by keeping the button pressed down to
sew in the opposite direction. Reinforcement stitches
are sewn by sewing 3 to 5 stitches on top of each other.
For details, refer to "Securing the stitching" (page 50).
cNeedle position button
Press the needle position button to raise or lower the
needle. Pressing the button twice sews one stitch.
dThread cutter button
Press the thread cutter button after stopping sewing to
cut both the upper and the bobbin threads. For details,
refer to "Cutting the thread" (page 51).
eSewing speed controller
Slide the sewing speed controller to adjust the sewing
speed.
fPresser foot lever
Raise and lower the presser foot lever to raise and lower
the presser foot.
CAUTION
Note
zDo not press the thread cutter button if there
is no fabric under the presser foot or while
the machine is sewing, otherwise damage to
the machine may occur.
zWhen cutting thread thicker than #30, nylon
thread or other special threads, use the
thread cutter on the side of the machine. For
details, refer to "Cutting the thread" (page
51).
2
3
1
5
6
4
Green: When the machine is ready to start
sewing or while it is sewing
Red: When the machine is not ready to
start sewing
Orange: When the bobbin winder shaft is
moved to the right for winding the
bobbin thread onto the bobbin
●Do not press the thread cutter button
after the threads have already been cut,
otherwise the needle may break, the
threads may become tangled or damage
to the machine may occur.

Cover E
GETTING READYCONTENTS SEWING BASICS UTILITY STITCHES APPENDIX INDEX
Operation panel
The operation panel, located on the front at the right of the sewing machine, consists of the LCD (liquid crystal
display) and keys for specifying various sewing settings.
aLCD (liquid crystal display)
Settings for the selected stitch and error messages for
incorrect operations appear in the LCD. Use keys b
through i, described below, to display various items
and select the settings. For details, refer to
"Understanding the LCD Screens" (page 12).
bSewing machine help key
Press this key to display operation information. Simple
descriptions on threading the upper thread, installing
the bobbin, winding the bobbin and replacing the
presser foot can be displayed.
cStitch selection key
Press this key to select the desired type of stitch.
d+ key
Press this key to add a pattern when sewing
combinations of characters or decorative stitches.
eC key
Press this key to remove an added pattern when sewing
combinations of characters or decorative stitches.
fArrow keys
Use these keys to move in the indicated direction when
selecting an item displayed on the screen. In addition,
can be pressed to select a lower setting and
can be pressed to select a higher setting.
gOK key
Press this key to apply the selected item.
hBack key
Press this key to return to the previous screen.
iSettings key
Press this key to select sewing settings, such as for
automatic reverse/reinforcement stitching, or other
settings such as the operation beep.
jStitch keys
Use these keys to quickly select one of 12 of the most
often used stitches. For details, refer to "Selecting
Stitching" (page 66).
1
2
3
4
5
6
7
8
9
0

1
Optional Accessories
GETTING READYCONTENTS SEWING BASICS UTILITY STITCHES APPENDIX INDEX
Optional Accessories
The following are available as optional accessories.
1. Wide table
Part code: SA537, WT2 (XC4541-051)
Memo
zTo obtain optional accessories or parts, contact your sales representative or the nearest authorized
service center.
1.

2
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
GETTING READYCONTENTS SEWING BASICS UTILITY STITCHES APPENDIX INDEX
Introduction
Thank you for purchasing this sewing machine. Before using this sewing machine, carefully read the
"Important Safety Instructions" (page 6), and then study this manual for the correct operation of the various
functions. In addition, after you have finished reading this manual, store it where it can quickly be
accessed for future reference.
Sewing Machine Features
aEasy upper threading
Since the spool can be installed at the front of the sewing machine, the upper thread can easily be threaded. In addition,
the needle can be threaded with a simple operation. (page 24)
bFull auto upper thread tension
The thread tension is adjusted automatically.
cAutomatic thread-cutting
The sewing machine can be set to automatically cut the thread at the end of the stitching. (page 58)
dOne-touch lower threading
You can start sewing without pulling up the bobbin thread. (page 22)
eSimple bobbin-winding
The bobbin can quickly and easily be wound with thread. (page 18)
fBuilt-in stitches
You can select from the built-in stitches available, including utility stitches, character stitches and decorative stitches.
Twelve of the most often used utility stitches can quickly be selected with the stitch keys. (page 66)
gKnee lifter
Use the knee lifter to raise and lower the presser foot with your knee, leaving both hands free to handle the fabric. (page
61)
15
3
2
4
7
6

3
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
GETTING READYCONTENTS SEWING BASICS UTILITY STITCHES APPENDIX INDEX
Contents
Enclosed Accessories ............................................................................................... Cover A
Accessories ............................................................................................................................................ Cover A
Names of Machine Parts and Their Functions ......................................................... Cover B
Front view...............................................................................................................................................Cover B
Needle and presser foot
section .................................................................................................................................................. Cover C
Right-side/rear view .............................................................................................................................. Cover C
Operation buttons ..................................................................................................................................Cover D
Operation panel......................................................................................................................................Cover E
Optional Accessories...........................................................................................................1
Introduction ........................................................................................................................2
Sewing Machine Features....................................................................................................2
Important Safety Instructions ..............................................................................................6
GETTING READY 9
Turning the Machine On/Off.............................................................................................10
Power supply precautions ............................................................................................................................... 10
Turning on the machine ..................................................................................................................................11
Turning off the machine .................................................................................................................................. 11
Understanding the LCD Screens........................................................................................12
Checking machine operating procedures ........................................................................................................13
Changing the Machine Settings .........................................................................................14
Changing the settings ...................................................................................................................................... 14
Changing the needle stop position ..................................................................................................................16
Adjusting the brightness of the LCD ................................................................................................................ 16
Changing the screen language......................................................................................................................... 17
Winding/Installing the Bobbin...........................................................................................18
Bobbin precautions ......................................................................................................................................... 18
Winding the bobbin ........................................................................................................................................ 18
Installing the bobbin .......................................................................................................................................22
Upper Threading ...............................................................................................................24
Threading the upper thread ............................................................................................................................. 24
Threading the needle ...................................................................................................................................... 27
Using the twin needle .....................................................................................................................................28
Using thread that winds off quickly .................................................................................................................31
Pulling up the bobbin thread........................................................................................................................... 31
Replacing the Needle ........................................................................................................33
Needle precautions ......................................................................................................................................... 33
Needle types and their uses.............................................................................................................................34
Checking the needle .......................................................................................................................................35
Replacing the needle....................................................................................................................................... 35
Replacing the Presser Foot ................................................................................................37
Presser foot precautions .................................................................................................................................. 37
Replacing the presser foot ............................................................................................................................... 37
Adjusting the pressure of the presser foot ........................................................................................................ 39
Removing the presser foot holder .................................................................................................................... 39
Using the walking foot .................................................................................................................................... 40
Sewing Cylindrical or Large Pieces....................................................................................42
Stitching cylindrical pieces..............................................................................................................................42
Sewing large pieces of fabric........................................................................................................................... 42
SEWING BASICS 45
Sewing...............................................................................................................................46

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
4
GETTING READYCONTENTS SEWING BASICS UTILITY STITCHES APPENDIX INDEX
General sewing procedure ..............................................................................................................................46
Positioning the fabric ...................................................................................................................................... 47
Starting to sew.................................................................................................................................................48
Securing the stitching ...................................................................................................................................... 50
Cutting the thread ........................................................................................................................................... 51
Adjusting the Thread Tension ............................................................................................53
Thread tension ................................................................................................................................................ 53
Changing the tension of the upper thread........................................................................................................ 54
Adjusting the Stitch Width and Length ..............................................................................55
Adjusting the stitch width................................................................................................................................55
Adjusting the stitch length ............................................................................................................................... 56
Useful Functions................................................................................................................57
Automatically sewing reverse/reinforcement stitches ....................................................................................... 57
Automatically cutting the thread ..................................................................................................................... 58
Saving stitch settings ....................................................................................................................................... 60
Hands-free raising and lifting of the presser foot .............................................................................................. 61
Useful Sewing Tips ............................................................................................................62
Trial sewing ....................................................................................................................................................62
Changing the sewing direction ........................................................................................................................62
Sewing curves .................................................................................................................................................62
Sewing thick fabrics ........................................................................................................................................63
Sewing thin fabrics..........................................................................................................................................63
Sewing stretch fabrics......................................................................................................................................63
Sewing leathers or vinyl fabrics ....................................................................................................................... 64
Sewing an even seam allowance.....................................................................................................................64
UTILITY STITCHES 65
Selecting Stitching.............................................................................................................66
Stitch types...................................................................................................................................................... 66
Selecting stitching ........................................................................................................................................... 66
Overcasting Stitches..........................................................................................................68
Sewing overcasting stitches using overcasting foot "G" .................................................................................... 68
Sewing overcasting stitches using zigzag foot "J" .............................................................................................69
Sewing overcasting stitches using the side cutter ............................................................................................. 70
Basic Stitching ...................................................................................................................72
Basting ............................................................................................................................................................72
Basic stitching .................................................................................................................................................73
Blind Hem Stitching ..........................................................................................................74
Buttonhole Stitching..........................................................................................................76
Buttonhole sewing .......................................................................................................................................... 77
Button sewing ................................................................................................................................................. 81
Zipper Insertion.................................................................................................................83
Inserting a centered zipper .............................................................................................................................. 83
Inserting a side zipper ..................................................................................................................................... 85
Zipper/piping Insertion .....................................................................................................88
Inserting a centered zipper .............................................................................................................................. 88
Inserting a piping ............................................................................................................................................ 89
Sewing Stretch Fabrics and Elastic Tape............................................................................90
Stretch stitching...............................................................................................................................................90
Elastic attaching .............................................................................................................................................. 90
Appliqué, Patchwork and Quilt Stitching ..........................................................................92
Appliqué stitching ...........................................................................................................................................93
Patchwork (crazy quilt) stitching ..................................................................................................................... 94
Piecing ............................................................................................................................................................ 94
Quilting ..........................................................................................................................................................96
Free-motion quilting........................................................................................................................................ 97
Satin stitching..................................................................................................................................................98
Reinforcement Stitching ..................................................................................................100
Triple stretch stitching ...................................................................................................................................100

5
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
GETTING READYCONTENTS SEWING BASICS UTILITY STITCHES APPENDIX INDEX
Bar tack stitching........................................................................................................................................... 100
Darning......................................................................................................................................................... 102
Eyelet Stitching................................................................................................................104
Horizontal Stitching ........................................................................................................105
Decorative Stitching........................................................................................................107
Fagoting ........................................................................................................................................................ 108
Scallop stitching............................................................................................................................................ 109
Smocking ...................................................................................................................................................... 109
Shell tuck stitching ........................................................................................................................................ 110
Joining .......................................................................................................................................................... 111
Heirloom stitching ........................................................................................................................................112
Sewing the Various Built-In Decorative Patterns.............................................................115
Sewing beautiful patterns .............................................................................................................................. 115
Sewing patterns............................................................................................................................................. 115
Combining patterns....................................................................................................................................... 116
Repeat sewing patterns.................................................................................................................................. 117
Checking the selected pattern ....................................................................................................................... 118
Changing the pattern size..............................................................................................................................119
Changing the stitch density ........................................................................................................................... 120
Changing the pattern length ..........................................................................................................................120
Shifting patterns ............................................................................................................................................ 121
Mirror imaging the pattern ............................................................................................................................122
Storing a pattern............................................................................................................................................ 123
Realigning the pattern ...................................................................................................................................124
Designing a Pattern .........................................................................................................126
Drawing a sketch of the pattern..................................................................................................................... 126
Entering the pattern data ...............................................................................................................................127
Examples of designs ......................................................................................................................................129
APPENDIX 131
Stitch Settings..................................................................................................................132
Utility stitches ...............................................................................................................................................132
Other stitches................................................................................................................................................ 137
Maintenance....................................................................................................................140
Cleaning the machine surface ....................................................................................................................... 140
Cleaning the shuttle ...................................................................................................................................... 140
Troubleshooting ..............................................................................................................142
Error messages .............................................................................................................................................. 146
Nothing appears in the LCD..........................................................................................................................147
Easily adjusting the thread tension................................................................................................................. 147
Operation beep ............................................................................................................................................. 148
Cancelling the operation beep ......................................................................................................................148
Removing the upper cover ............................................................................................................................149
Index ................................................................................................................................150

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
6
GETTING READYCONTENTS SEWING BASICS UTILITY STITCHES APPENDIX INDEX
Important Safety Instructions
When using this machine, basic safety precautions should always be taken, including the following:
Read all instructions before using.
DANGER - To reduce the risk of electric shock:
1. The machine should never be left unattended while plugged in. Always unplug the machine from
the electrical outlet immediately after using and before cleaning.
WARNING - To reduce the risk of burns, fire, electric shock, or injury to persons:
1. Do not allow this machine to be used as a toy. Close attention is necessary when the machine is
used by or near children.
2. Use this machine only for its intended use as described in this manual. Use only accessories
recommended by the manufacturer as contained in this manual.
3. Never operate this machine if it has a damaged cord or plug, if it is not working properly, if it has
been dropped or damaged, or dropped into water. Return the machine to the nearest authorized
dealer or service center for examination, repair, electrical or mechanical adjustment.
4. Never operate the machine with any air openings blocked. Keep ventilation openings of the
machine and foot control free from the accumulation of lint, dust, and loose cloth.
5. Never drop or insert any object into any opening.
6. Do not use outdoors.
7. Do not operate where aerosol (spray) products are being used or where oxygen is being
administered.
8. To disconnect, turn the main switch to the symbol " " position which represents off, then
remove plug from outlet.
9. Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
10.Keep fingers away from all moving parts. Special care is required around the machine needle.
11.Always use the proper needle plate. The wrong plate can cause the needle to break.
12.Do not use bent needles.
13.Do not pull or push fabric while stitching. It may deflect the needle causing it to break.
14.Switch the machine to the symbol " " position when making any adjustments in the needle
area, such as threading needle, changing needle, threading bobbin, or changing presser foot, and
the like.
15.Always unplug the machine from the electrical outlet when removing covers, lubricating, or
when making any other user servicing adjustments mentioned in the instruction manual.
16.This sewing machine is not intended for use by young children or infirm persons without
supervision.
17.Young children should be supervised to ensure that they do not play with this machine.
18.If the Light unit is damaged, it must be replaced by authorized dealer.
SAVE THESE INSTRUCTIONS
This machine is intended for household use.

7
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
GETTING READYCONTENTS SEWING BASICS UTILITY STITCHES APPENDIX INDEX
FOR USERS IN THE UK, EIRE, MALTA AND CYPRUS ONLY
If this machine is fitted with a three-pin non-rewireable BS plug then please read the following.
IMPORTANT
If the available socket outlet is not suitable for the plug supplied with this equipment, it should be cut
off and an appropriate three-pin plug fitted. With alternative plugs an approved fuse must be fitted in
the plug.
NOTE
The plug served from the main lead must be destroyed as a plug with bared flexible cords is
hazardous if engaged in a live socket outlet. In the event of replacing the plug fuse, use a fuse
approved by ASTA to BS 1362, i.e. carrying the mark, rating as marked on plug.
Always replace the fuse cover, never use plugs with the fuse cover omitted.
WARNING
DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL WHICH IS MARKED WITH THE
LETTER ‘E’, BY THE EARTH SYMBOL OR COLOURED GREEN OR GREEN AND YELLOW.
The wires in this main lead are colored in accordance with the following code:
As the colors of the wiring in the main lead of this appliance may not correspond with the colored
markings identifying the terminals in your plug, proceed as follows.
The wire which is colored blue must be connected to the terminal which is marked with the letter
‘N’ or colored black or blue.
The wire which is colored brown must be connected to the terminal which is marked with the letter
‘L’ or colored red or brown.
Blue Neutral
Brown Live

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
8
GETTING READYCONTENTS SEWING BASICS UTILITY STITCHES APPENDIX INDEX
CONGRATULATIONS ON CHOOSING OUR MACHINE
Your machine is one of the most advanced computerized household sewing machines. To fully
enjoy all the features, we suggest that you study the manual before using the machine.
PLEASE READ BEFORE USING THIS MACHINE
For safe operation
1. Be sure to keep your eye on the needle while sewing. Do not touch the hand wheel, thread take-
up lever, needle, or other moving parts.
2. Remember to turn off the power switch and unplug the cord when:
• Operation is completed
• Replacing or removing the needle or any other parts
• A power failure occurs during use
• Maintaining the machine
• Leaving the machine unattended
3. Do not store anything on the foot controller.
4. Plug the machine directly into the wall. Do not use extension cords.
For a longer service life
1. When storing this machine, avoid direct sunlight and high humidity locations. Do not use or store
the machine near a space heater, iron, halogen lamp, or other hot objects.
2. Use only neutral soaps or detergents to clean the case. Benzene, thinner, and scouring powders
can damage the case and machine, and should never be used.
3. Do not drop or hit the machine.
4. Always consult the operation manual when replacing or installing any assemblies, the presser
feet, needle, or other parts to assure correct installation.
For repair or adjustment
In the event a malfunction occurs or adjustment is required, first follow the troubleshooting table in
the back of the operation manual to inspect and adjust the machine yourself. If the problem persists,
please consult your local authorized Brother dealer.
For additional product information and updates, visit our web site at www.brother.com

GETTING READYCONTENTS SEWING BASICS UTILITY STITCHES APPENDIX INDEX
1 GETTING READY
The various preparations required before starting to sew are described in this chapter.
Turning the Machine On/Off ..................................................................................10
Understanding the LCD Screens..............................................................................12
Changing the Machine Settings ...............................................................................14
Winding/Installing the Bobbin.................................................................................18
Upper Threading .....................................................................................................24
Replacing the Needle ..............................................................................................33
Replacing the Presser Foot ......................................................................................37
Sewing Cylindrical or Large Pieces..........................................................................42

GETTING READY — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
10
GETTING READYCONTENTS SEWING BASICS UTILITY STITCHES APPENDIX INDEX
Turning the Machine On/Off
This section explains how to turn the sewing machine on and off.
Power supply precautions
Be sure to observe the following precautions concerning the power supply.
WARNING
CAUTION
●Use only regular household electricity for the power source. Using other power sources may
result in fire, electric shock, or damage to the machine.
●Turn off the main power and remove the plug in the following circumstances:
• When you are away from the machine
• After using the machine
• When the power fails during use
• When the machine does not operate correctly due to a bad connection or a disconnection
• During electrical storms
●Do not use extension cords or multi-plug adapters with many other appliances plugged in to
them. Fire or electric shock may result.
●Do not touch the plug with wet hands. Electric shock may result.
●When unplugging the machine, always turn off the main power first. Always grasp the plug to
remove it from the outlet. Pulling on the cord may damage the cord, or lead to fire or electric
shock.
●Do not allow the power cord to be cut, damaged, modified, forcefully bent, pulled, twisted,
or bundled. Do not place heavy objects on the cord. Do not subject the cord to heat. These
things may damage the cord and cause fire or electric shock. If the cord or plug is damaged,
take the machine to your authorized dealer for repairs before continuing use.
●Unplug the power cord if the machine is not to be used for a long period of time. Otherwise a
fire may result.

GETTING READYCONTENTS SEWING BASICS UTILITY STITCHES APPENDIX INDEX
Turning the Machine On/Off 11
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Turning on the machine
aMake sure that the sewing machine is turned
off (the main power switch is set to " "), and
then plug the power supply cord into the
power supply jack on the right side of the
machine.
bInsert the plug of the power supply cord into a
household electrical outlet.
aPower supply jack
cPress the right side of the main power switch
on the right side of the machine (set it to "|").
XThe sewing lamp and the LCD come on
when the machine is turned on.
Turning off the machine
When you are finished using the sewing machine,
turn it off. In addition, before transporting the sewing
machine to another location, be sure to turn it off.
aMake sure that the machine is not sewing.
bPress the left side of the main power switch on
the right side of the machine (set it to " ").
XThe sewing lamp goes off when the machine
is turned off.
cUnplug the power supply cord from the
electrical outlet.
Grasp the plug when unplugging the power
supply cord.
dUnplug the power supply cord from the power
supply jack.
Note
zWhen the sewing machine is turned off, all
stitch settings are cancelled.
zIf a power outage occurs while the sewing
machine is being operated, turn off the
sewing machine and unplug the power
supply cord. When restarting the sewing
machine, follow the necessary procedure to
correctly operate the machine.
(For U.S.A. only)
zThis appliance has a polarized plug (one
blade wider than the other). To reduce the
risk of electrical shock, this plug is intended
to fit in a polarized outlet only one way. If
the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact
a qualified electrician to install the proper
outlet. Do not modify the plug in any way.
1

GETTING READY — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
12
GETTING READYCONTENTS SEWING BASICS UTILITY STITCHES APPENDIX INDEX
Understanding the LCD Screens
The LCD screen, located on the front at the right of the sewing machine, displays the settings for the
selected stitch and error messages if operations are performed incorrectly.When the sewing machine is
turned on, the LCD comes on and the following screen appears.
aPresser foot that should be used
bSingle or twin needle
cSelected stitch
dStitch length (mm)
eStitch width (mm)
fUpper thread tension
Memo
zFor details on the error messages that appear when an operation is performed incorrectly, refer to "Error
messages" (page 146).
1
2
5
6
4
3

GETTING READYCONTENTS SEWING BASICS UTILITY STITCHES APPENDIX INDEX
Understanding the LCD Screens 13
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Checking machine operating
procedures
Simple descriptions on replacing the presser foot,
threading the upper thread, winding the bobbin and
installing the bobbin can be displayed in the LCD.
aTurn on the sewing machine.
XThe LCD comes on.
bPress (Sewing machine help key) in the
operation panel.
XThe sewing machine help screen appears.
cPress , , and (Arrow keys) until the
image illustrating desired topic is selected.
aReplacing the presser foot
bThreading the upper thread
cWinding the bobbin
dInstalling the bobbin
dPress (OK key).
XThe first screen describing the procedure for
the selected topic appears.
eTo display the next screen, press . To return
to the previous screen, press .
Example: Upper threading
fWhen you are finished with the help screen,
press (OK key).
XThe initial stitch screen appears again.
Note
zFor details on each topic, refer to the
corresponding page in this Operation
Manual.
1
34
2

GETTING READY — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
14
GETTING READYCONTENTS SEWING BASICS UTILITY STITCHES APPENDIX INDEX
Changing the Machine Settings
Various sewing machine operations and sewing settings can be changed.
Changing the settings
The general procedure for changing machine settings
is described below.
aTurn on the sewing machine.
XThe LCD comes on.
bPress (Settings key) in the operation panel.
XThe settings screen appears.
cPress , , and (Arrow keys) until the
stitch or machine attribute that you wish to set
is selected.
dPress (OK key).
XA screen containing settings for the selected
attribute appears.
ePress , , and (Arrow keys) until the
desired setting is selected.
XThe setting is changed.
fPress (OK key).
XThe initial stitch screen appears again.