Brunswick ConsolePlus User manual

October 18, 2021 Public Health New Brunswick
Page 1of 7
ConsolePlus Datalogger Instructions
1. Quick start Guide
•All new products from EVT/CVT will be supported by ConsolePlus. Software has built-in auto
update feature, when a new release is available it will prompt user to upgrade to newest
version. And with one click it will beupdated.
2. Dependences
•ConsolePlus can be installed on following platforms: Windows XP, Windows 7 and 8
•Adobe reader (latest Version) must be installed on the computer. If not, user may encounter
error
3. Accessories
For all iMINI (yellow case) data loggers Type A to Mini-B USB cable is required to connect data
logger to the workstation.
4. Installation
Setup file can be downloaded from https://www.cryopakdigital.com/software/
for free File name: ConsolePlusSetupid.exe / ConsolePlusSetup.zip
a. When you get started you should try to install the following applicationfile:
b. Once you have double clicked ConsolePlusSetup.exe file you will get the following Step
through Wizard: Note: Version no. *.** is being updatedregularly
c. Browse to select the location of installation if necessary or leave as default. Then, click NEXT
when prompted twice.
d. Click INSTALL to install the necessary drivers
e. Click INSTALL and then click FINISH to complete the installationprocess.
f. ConsolePlus icon is created and placed on desktop after the installation iscompleted.

October 18, 2021 Public Health New Brunswick
Page 2of 7
5. Main Menu + Icons
Most of the functions are disabled initially and will be highlighted or available depending on if
the data logger is plugged in or a file is open. User can select ‘options’ any time and change
the fields

October 18, 2021 Public Health New Brunswick
Page 3of 7
6. How to program the logger
a) Plugin USB mini port to iMINI and connect the USB port into an available USB slot on
workstation. (USB 5pin Mini cable toUSB)
b) ConsolePlus application will recognize the iMINI and will be available on left hand Logger
/ File List pane
c) ConsolePlus application will display the serial number of iMINI and the alarm status. In
functions tab it will reach to GRAPH tab bydefault.
d) If the function tabs are greyed out, click ‘download’ icon from thetop
e) Select PROGRAM tab. All the previous program information of connected logger is
displayed.
f) If logger has only one sensor or other sensor combination, the respected tabs are greyed
out by default. Software auto-detects the type of logger and display existing information
Loggerwith external sensor only (MX-OE-S-8-L) will appear on 1st tab and titlewill appear
int/ext temp. (NTC) Instead of Int. Temp (NTC)

October 18, 2021 Public Health New Brunswick
Page 4of 7
NOTE: Logger can be started by TIME / START button (immediate start or with delay) or with
both options enabled. Please select these settings carefully

October 18, 2021 Public Health New Brunswick
Page 5of 7

October 18, 2021 Public Health New Brunswick
Page 6of 7
And hit PROGRAM icon
g) A confirmation dialogue will appear for the final approval. ClickOK
h) After acceptance bottom left corner progress bar will progress and display100%
i) ‘READY’ will be on the LCD display ofiMINI. Logger is ready to start logging, according
to setting (timer or button) logger will start measuring and recording the data.
7. How to download the DATA
a) Plug iMINI into the USB mini port and run the USB port into an available USB slot on
workstation.
b) ConsolePlus will auto download (if checked inoptions)
c) Or user can always force the software to download by clicking thisicon:
d) A progress bar will appear (left bottomcorner)
e) Currently captured data or data of previous trip (if logger is displaying STOPPED) willbe
downloaded and will render the graph immediately of thedata
f) Download is also possible even if there is no data in the logger or new mission/trip has
not started and device isdisplaying READY. In some events previous trip data isavailable.
This helps if logger is accidently programmed and hasn’t yet started, user has a chance to
recover the data.
g) Download option will be disabled if logger is password protected and Allow RD isdisabled.
8. Options to view data
Recorded data can be viewed as a graph, histogram, table, or as a summary by selecting the
appropriate tab.

October 18, 2021 Public Health New Brunswick
Page 7of 7
Under Table, all the data from the logger (from START to FINISH of the current/last trip) can be
viewed here. Scroll down to view all the data of the logger. Readings are in colored fonts according
to alarm settings triggered to make them easier to understand and detect.
9. Additional resources
For further instructions, please refer to ESCORT ConsolePlus User Manual
A video is also available on YouTube, reviewing the steps to program and operate the device.