Brute Force OPERATOR User manual

Breathable
Aerospacer Mesh
interior panels
OPERATOR WEIGHTED
TRAINING VEST
TM
[:
SPECS
:]
WEIGHT:
Loadable from 10 to 40lbs.
Sand Capacity 16lbs.
MATERIALS:
Outer Shell constructed with heavy
duty, 1000D Mil-Spec Cordura and
an inner fillers made of tear proof
Ballistic Nylon.
AVAILABLE COLORS:
FEATURES:
100% USA Made from water-resistant
1000D Cordura, unique 12 pocket de-
sign, distributable weight options,
body conforming fit, unique filling
system, velcro chest patch location
: MIL-SPEC: 721-104
MADE IN THE U.S.A. • BUILT TO LAST • BACKED BY THE BRUTE FORCE SHIELD WARRANTY!
Unique Weight
Distributing
Fillers
1000D
Mil-Spec
Cordura
Velcro
Chest Patch
Location
Threaded Velcro
Closure
Double
Stitched
Construction
Adjustable Fit
Waist Straps
Body Contouring
Form Fit
UNSTABLE LOAD TRAINING:
The ability to unconventionally move or lift an
odd object or unstable, or uneven load eciently
and eectively. We are all about Unstable Load
Training because it provides a much more dynamic
and challenging training experience. The unstable
nature of a sandbag forces you to engage your
body’s stabilizer muscles, building coordinated
strength and balance throughout your body.

Avoid extended exposure to moisture, Cordura is water
resistant but not water proof, and over time this could
potentially degrade the stitching of your bag. Feel free
however to wash your sandbag as needed by hand or in a
washing machine on a gentle cycle; air dry only.
Do not set your bag on re for any reason. If you nd this
too tempting, be sure to capture it on video so we can
post it on YouTube. Be aware, this will certainly void your
warranty.
Do not use the desert camo sandbag in the desert.
Do not use the black sandbag in the dark.
Do not use the neon sandbag at a rave.
Do not use the coyote tan sandbag near coyotes.
If you are a guy, know that it is ok to use the hot pink
sandbag; there is great honor in lifting heavy pink objects.
Finally, do not let your friends borrow your Brute Force
Sandbag, you will not get it back. Instead refer them to
www.bruteforcetraining.com so they can get their own.
ADDITIONAL PRODUCTS AVAILABLE AT BRUTEFORCETRAINING.COM
SANDBAG INSTRUCTIONS & CARE
Your Operator Weight Vest is made tough and designed to be abused!
[:
STEP 1
:] FILL INSERTS
[:
STEP 2
:]LOAD SHELL
[: STEP 3
:] ADJUST
[:
STEP 4
:]TRAIN ACCORDINGLY
[:
CONFIGURATION
:]
Open up the 12 inner llers included with your vest by pulling apart each velcro strip. Pour the sand directly inside each ller one by
one, lling each to 1/4 inch below the lowermost velcro strip. This will ensure that there is enough room for the ller to close and for
sand to move within the ller as intended. Make sure that the velcro on each ller is free of sand! Once the velcro is clear, use your
ngers to press inch by inch along the length of the lowermost velcro strip (the one around the inside of the ller) until it is sealed
tightly and evenly. There should be no gaps between any part of the velcro. Once the lower velcro is sealed, fold over the topmost velcro
strips so that they are connected, and once again press your ngers along the length of each until evenly and tightly sealed.
Now that all of your inner llers are lled and sealed, place each ller into the pockets around the outside of your vest. Make sure you
ll pockets with even weight on both the left and right sides, as well as the front and back. Once you have all desired llers placed into
the pockets on your vest, seal the pockets just and you did the inner llers, by connecting the velcro and pressing along its length with
your ngers.
Your weight vest is adjustable at both the shoulders and the hips. Try it on and experiment with dierent lengths at each point to get the
t you prefer. Get your vest on and o of your torso by releasing all adjustment points and sliding it over your head or dropping it down
to your feet and stepping out of it.
Download the
FREE Brute Force
Mobile App for
killer sandbag
workouts.