BSi iCLAX User manual

1
Headquarters : Konutkent Mah. 3029 Cad. No:3/91 06810 Çankaya Ankara/TURKEY Phone : [phone] Fax : [phone] Email : [email protected]
iCLAX INSTALLATION GUIDE
PRODUCT FEATURES:
iClax is a high output LED floodlight with perfect beam control.
Glare free and available with narrow, medium and wide beam optics.
Ideally suited as a spotlight for accent light from a large distance or as a floodlight
for the illumination of large building facades and sculptures.
Designed to last in extremely harsh environments.
Monochrome, RGB, RGBW, DMX and DALI controllable, easy to install with the
integrated universal power supply and connect via combined power and data connectors
RECOMMENDATIONS FOR THE USER:
1)Before the installation, make sure that there is no voltage.
2)Do not touch the fitting when it is working on / switched on
3)Do not look at the fitting directly or from a short distance.
4)Disconnect / switch off the fitting before changing the lamps
NOTES:
-Technical amendments are reserved.
-CE – Conformity mark
-The manufacturer is then discharged from liability when damage is caused by improper
use or installation.
-Clean luminaire regularly with solvent-free cleansers from dirt and deposits. Do not use
high pressure cleaners.

2
Headquarters : Konutkent Mah. 3029 Cad. No:3/91 06810 Çankaya Ankara/TURKEY Phone : [phone] Fax : [phone] Email : [email protected]
1) The mounting platform is removed by loosening
the setscrews on the luminaire foot.
3) Electrical connection of the luminaire is done.(Page 3)
The luminaire is placed on the mounting plate.
Tighten the setscrews with desired
direction by turning right or left.
iCLAX INSTALLATION GUIDE
Mounting Surface
2) Drill holes on the mounting surface and install
the fixing plugs.
The mounting plate is screwed onto the
mounting surface.
Setscrew
4) Keyed head bolt on the back side of the
luminaire are loosened to the desired angle and the
tightened again.
Incoming
energy
cable
Incoming
energy
cable
Luminaire
cable

3
Headquarters : Konutkent Mah. 3029 Cad. No:3/91 06810 Çankaya Ankara/TURKEY Phone : [phone] Fax : [phone] Email : [email protected]
- iClax Mono Electrical Connection
IP 68 Terminal
Block
*Page 4
IP 68 Plug
Connector
*Page 5
or or
IP 68 Socket
When connecting the
luminaires, make sure that the
same color cables are
matching. (+) Brown
( ) Yellow - Green
(-) Blue
- iClax Mono Multi Electrical Connection
The incoming power line.
- iClax RGB-RGBW Electrical Connection
220VAC
When connecting the
luminaires, make sure that the
same color cables are
matching.
*Please contact us for cables if in different colors.
When connecting the
luminaires, make sure that
the same color cables are
matching.
*Please contact us for cables if in different colors.
DATA
(+) White
( ) Green
(-) Brown
- iClax RGB-RGBW Multi Electrical Connection
*Install the luminaires according to the order in numbers. The cable from main controller should first be connected to the luminaire number 1.
(+) Brown
( ) Yellow - Green
(-) Blue
iCLAX INSTALLATION GUIDE
The incoming
power line.
220VAC
OUT
220VAC
IN
Input Data
Input Electric
220VAC
DATA
Input Electric
Input Data
22
220VAC
DATA
220VAC
DATA
220VAC
DATA
220VAC
DATA
220VAC
OUT IN
DATA
OUT IN
IP 68 Terminal Block IP 68 Plug Connector IP 68 Socket
RESIN
At the outlet of AC output RESIN cable end of
the final luminaire, the component is tightened
as a filled material or protected by resin.
DMX Main
Controller
and
Fuse Box
220VAC
OUT
DATA
OUT
Max 5mt Cable Max 5mt Cable
Max 22 Piece
220VAC
OUT
220VAC
IN
220VAC
OUT
220VAC
IN
2
220VAC
OUT IN
DATA
OUT IN
1
220VAC
OUT IN
DATA
OUT IN

4
Headquarters : Konutkent Mah. 3029 Cad. No:3/91 06810 Çankaya Ankara/TURKEY Phone : [phone] Fax : [phone] Email : [email protected]
iCLAX INSTALLATION GUIDE

5
Headquarters : Konutkent Mah. 3029 Cad. No:3/91 06810 Çankaya Ankara/TURKEY Phone : [phone] Fax : [phone] Email : [email protected]
iCLAX INSTALLATION GUIDE

6
Headquarters : Konutkent Mah. 3029 Cad. No:3/91 06810 Çankaya Ankara/TURKEY Phone : [phone] Fax : [phone] Email : [email protected]
Considerations
- Do not cut-off or damage the cables of the products supplied as sockets.
Otherwise, water may enter to the luminaire through cable and damage the electronic
parts inside.
- If you make the electrical connection, except for IP.68 Terminal Block - IP.68 Plug connector
- IP.68 socket; the connections must be under IP protection. Otherwise, water may enter to the
luminaire through cable and damage the electronic parts inside.
- The IP68 Connecting kits must be assembled in accordance with the installation instructions.
Otherwise, water may enter to the luminaire through cable and damage the electronic parts inside.
- The luminaire should not be opened and screws should not be loosened. If you want to open the
luminaire, please contact our company.
Out of Warranty Situations
- Opening the product or loosening the screws.
- Product last output cable is not protected IP67-IP68.
- Faulty electrical connection.
- Wrong IP68 socket-terminal block- plug connector connection.
(Wrong opening of the cable length, fauly tightening the screws etc.)
- If the IP68 Connecting kits are under water.
iCLAX INSTALLATION GUIDE