BSTY A1 Pro Black User manual

Scan the QR Code to
After-sales Phone: [phone]
After-sales Email： [e-mail]
After-sales Address: Smartai US Ltd 7757 Auburn RdUnit 4
Concord Township,OH,44077-9604
Website： www.bstyhome.com
access video tutorials
A1 Pro Black
After-sales Email：[e-mail]
Website：https://bstyhome.com
Scan the QR Code to
access video tutorials
User Manual
Mopping Robot Vacuum Cleaner

Welcome to use
* Please refer to the actual product. The company reserves the right to improve product.
Please read this manual carefully before using this product and keep it properly.
Thank you for purchasing Mopping Robot Vacuum Cleaner.
Please take a few moments to read this user manual which will guide
you to have a comprehensive understanding of the product and install it
quickly.It also provide you some important information regarding the use
and maintanance to ensure you get the most benefit from using it
A1 Pro Black
.
01

Content
1.2 Name of each part
1. Product Composition 03
04
1.1 Package Contents 03
17
2.1 App download
2.2 Notes
2.3 Preparations
2.4 Robot operation
2.5 Cleaning mode
2.6 Base station operation
2.7 Recharging
2. Operation instruction 07
07
08
09
12
14
16
3.1 Dust bin
3.2 Wastewater groove,wastewater tank
3.3 Other components
3.4 Base station
3.5 Frequency
3. Daily maintenance 18
18
19
20
24
27
5. Security Information 30
4. Trouble shooting 28
02
32
6. Product Specifications

User Manual x1Dust bag x2
（assembled,extra)
Cleaning brush x1
Filter box x2
(assembled,extra)
Power cord x1 Side brush x4
（assembled,extra)
Wastewater tank+
Clean water tank x1
Base station x1 Robot x1
03
Mop Roller x2
(assembled,extra)
*The illustrations in this user manual are for reference only . Please refer to the actual product.
1.Product Composition/1.1 Package Contents

04
Anti-collision
sensor window
Top Cover
Anti-collision
sensor window
Camera
Dust bin
Wi-Fi Re-set button
Wastewater tank
On/Off
Power switch
Clean water tank
Product Front
Top view
1.Product Composition/1.2 Name of each part

1.Product Composition/1.2 Name of each part
Univiersal wheels
Driving Wheels
Floating suction port
Charging contacts
Carpet detection sensor
Side brushes
Wastewater outlet
Dust suction port
Clean water inlet
Mop Roller
Wastewater groove
05
Bottom View Cliff sensors

06
1.Product Composition/1.2 Name of each part
Station Diagram
Station dust port
Waste water tank
Clean water tank
Charging contacts
Infared TX
Control panel
Station hot wind port
Power port
Dust bag cover

Scan the QR code as below or on the
robot to download and install the Home app.
07
Android
iOS
Amicro Smart
2.Operation instruction/2.1 App download
（1）
Press and hold the Wi-Fi button for three seconds
until the breath light is blue, and the voice says
"Wi-Fi reset" .After that, you can enter the Wi-Fi
password on the mobile app for internet access.
Search for "Amicro Smart" in the App Store or
Google Play to download and install the app.
3 seconds.
Before you start, make sure that:
• Your mobile phone is connected to a Wi-Fi network.
• The Wi-Fi indicator light on Robot is slowly flashing.
the breath light is blue, and
the voice says "Wi-Fi reset"
• The 2.4GHz band wireless signal is enabled on
your router.Don’t connect 5 GHz.
.
After that, you can enter the
Wi-Fi password on the mobile
app for internet access.
1. Long press Wi-Fi setting key for
2.

08
Tidy cables and loose items from the ground and move any unstable, fragile, precious, or dangerous,
objects to prevent personal injury or property damage due to items becoming tangled in, struck by, or knocked over by the robot.
2.Operation instruction/2.2 Notes
Note: When using the robot for the first time, follow it throughout its whole cleaning route and watch for major obstacles.
The robot will be able to clean by itself in future uses.
If using this robot in a raised area, always use a secure physical barrier to prevent accidental falls that may result in personal
injury or property damage.

Please check if there is any improper
installation of the cleanwater tank,wastewater tank,
wastewater groove, side brush, and dust box.
（2）（1）Remove the protective material located
on both sides of the robot.
09
2.Operation instruction/2.3Preparations

（1）
Fill up clean water tank with clean water and add
an appropriate amount of the cleaning liquid.
（4）Put a new dust bag in the dust bin.
Dump the wastewater.
（2）
10
2.Operation instruction/2.3Preparations
（3）Remove the magnetic dust cover
from the base station.

（2）Open lid and fill up with clean water.
11
2.Operation instruction/2.3Preparations
（3）Install clean water tank and start sweeping and mopping.
Hold the handle of the clean water tank and
lift upwards to remove it.
（1）

（1）Main power switch(On/Off): Push the button
to"I" to turn on the machine.
Note: It will be unable to turn on when insufficient power,
please put the robot back to the base station to recharge.
It takes about 6 hours to fully charge the battery.
Note: I=ON, O=OFF
（2）The robot will return to the base station and recharge when battery
capacity is less than 15%. You can also use the station botton to
direct robot to recharge.
12
2.Operation instruction/2.4 Robot operation

Starting up:White light breath state bright.
Standby:White light bright all the time.
Working:White light bright all the time.
Charging:Green light breath state bright.
Fully charged:Green light bright all the time.
Fault time:Red light flicks.
Wi-Fi:When the robot enters the connection mode,
the blue light is on. During the connection process,
the blue light flashes. If the connection fails,
the red light is on. If the connection is successful,
the white light is on.
Machine Indicator Light State
On/Off
13
2.Operation instruction/2.4 Robot operation
Pause/Start: Press briefly the and buttons on the robot,
and the base for a short time to pause or start cleaning.

1. In this mode, the robot will turn off the mopping function
and only start the sweeping and vacuum functions.
2. Press the Robot Power button/App Pause/base pause,
the robot suspended.
14
(APP control optional)
4. ppi g modeMo n
(APP control optional)
3.Local dry sweep
(APP control optional )
2.Dry sweep mode
1.Intelligent mode
(Main button/APP control)
1. In this mode, the robot will start the dry sweeping and
mopping functions to clean the whole house automatically.
2. Press the Robot Power button/App Pause/base pause,
the robot suspended.
2.Product use/2.5 cleaning mode
1. In this mode, the robot turns off the dust suction function and
starts the mopping function.
2. Press the Robot Power button/App Pause/base pause,
the robot suspended.
1. In this mode, the robot will turn off the mopping function and
only start the sweeping and vacuum functions.
2. After choose this mode on the app, the robot runs to the
selected area and starts to dry sweep at local fixed points in the
1.0mx1.0m area.
Press the Robot Power button/App Pause/base pause,
the robot suspended.
3.

15
2.Product use/2.5 cleaning mode
1. Choose out adaptive mopping for hard plank floor. In this mode,
the dust suction fan has two adjustable gears on APP.
2. Press the Robot Power button/App Pause/base pause,
the robot suspended.
1. Choose out adaptive mopping for the balcony floor, and start the
vacuum fan in this mode.
2. Press the Robot Power button/App Pause/base pause,
the robot suspended.
1. Choose out adaptive mopping for the marble floor, and turn off
the vacuum fan in this mode.
2. Press the Robot Power button/App Pause/base pause,
the robot suspended.
1. Select this mode Robot turn off the sweeping and vacuum function
and start the mopping function.
2. After choose the mode on the app, the robot runs to the selected
area and starts to mop at local fixed points in the 1.0mx1.0m area.
3. Press the Robot Power button/App Pause/base pause,
the robot suspended.
1. In this mode, the machine turns off the dust suction function and
turns on the efficient mopping performance.
2. Press the Robot Power button/App Pause/base pause,
the robot suspended.
5.Local mopping mode
(APP control optional)
6. Deep mopping mode
(APP control optional)
7.Marble mopping mode
(APP control optional)
8.Balcony sweeping mode
(APP control optional)
9.Plank mopping mode
(APP control optional)

16
2.Operation instruction/2.6 Base station operation
Dust bag not installed
/Replaced
Robot Error
Start/Pause
Dust collection
Return to base station
Mop roller Cleaning process
Child lock
(Operate by App）
Programming bar
Clean water tank not installed
Wastewater tank not installed

17
>1.0m
>1.0m
>1.5m
2.Operation instruction/2.7 Recharging
* If there are reflective objects such as mirrors and reflective skirting lines near the station, the bottom
14cm of that should be covered. Do not place the base station under direct sunlight.
The base station is placed against the wall and is to be placed on a flat ground.
Remove any objects that are closer than 1.5 m from the front and 1.0 m from either side of the base.

18
3.Daily maintenance/3.1Dust bin
Nylon mesh
Sponge
HEPA filter
Dust bin
Note: Air-dry for at least 24h before reuse
Open top cover and remove dust bin.
（1）
Rinse dust bin with clean water.
（2）
Open the lid and empty dust bin. （3）
Note: Please use the cleaning brush to clean HEPA.
Don’t use fingers to clean HEPA.

19
Wastewater tank Wastewater groove
3.Daily maintenance/3.2 Wastewater groove,wastewater tank
Lift out to remove the wastewater tank.
（2） Rinse the wastewater tank with clean water
and use the cleaning brush to clean the dirt.
（2） Rinse the wastewater groove with clean water
and use the cleaning brush to clean the dirt.
（1）Wash the wastwater tank with clean water.
Note: Please wipe surface after cleaning the wastewater tank and then install
in the robot until there will be a voice prompt "Wastewater tank installed".
Note: The wastewater groove can only be removed after wastewater tank
being removed. (The wastewater groove is under the wastewater tank)
（1）