BT MULTIJET 3000 User manual

BT MultiJet 3000
Printer, copier and scanner
Key features
At a glance
Introduction
Safety information
Setting up
Installing your BT MultiJet 3000
Installing your PC Software
nabling fax/email after installation
Upgrading your software
Uninstalling your software
Copying
Operating the copier
Setting up from your PC
Printing
Setting up and using your printer
Paper options
Scanning
Setting up from your PC
Scanning from the control panel
Scanning from your PC
mail, fax & OCR
Help
General information
Technical Specification
Software Licence
Index

Key features
PC printer
Connected to your PC, the BT MultiJet 3000 acts as a
colour and mono printer giving you crisp, clear inkjet
images.
Copier
Make up to copies of a document or photograph in
colour or black and white. You can adjust the settings
and operate your machine from its control panel or from
your PC.
Scanner
Scan documents and images direct to your PC.
The preview feature lets you select and scan a specific
part of an image. You can convert a scanned document
to text ready for editing.
Fax
Using your PC modem and the software provided you can
send and receive faxed documents.
Email
Using your PC modem and email account, you can attach
scanned images to outgoing messages.
Range of papers
Use your BT MultiJet 3000 to print on envelopes,
transparencies, card and the full range of inkjet paper
types.
Photo cartridge option
If you print photographs, you can use a special photo
cartridge to give you the best results on glossy
photographic paper.
Removable cover for
copying or scanning
If you want to scan or copy bulky items such as books,
you can remove the scanner cover enabling you to lay
the item flat on the scanner glass.

At a glance - front view
Paper width guide
Front compartment door
Open to access the ink
cartridges and scanner lock.
Scanner cover
Open to scan.
Control panel
Paper tray catches
Press down on the catches to open the
paper tray so you can adjust paper width,
load envelops or clear paper jams.
Printed document tray
Extend the tray to hold printed pages.
Paper tray
Holds up to 100 sheets
of A4 paper.

Copy Quality
Colour/Black Paper Size
Form Feed
Power Scan Number of Copies
Adjust
oom
Contrast
Paper type No
S
T
O
P
Yes
S
T
A
R
T
BT MultiJet 3000
At a glance - control panel
Power
Switch on or off.
Form Feed
Press to restart
printing after adding
paper in the paper
tray. Press to eject
paper if paper is not
ejected automatically
after printing.
STOP No
Provides the
option to stop
any action in
progress.
Answers NO to
questions asked
in the display.
START Yes
Starts a copy or
scan job. Answers
YES to questions
asked in the display.
Scan
Press to
determine the
destination of the
scanned image.
Press and hold
to align or clean
inkjet cartridges.
Colour Black
Selects colour
(CLR) or black
(BLK) copying
LCD Display
Displays current copy
information and menu options.
e.g. [CLR - NORML - A4 - 1]
Colour/Black – Quality – Paper
Size – Number of Copies
Copy Quality
Sets the copy
resolution:
Normal, Fine
or Quick
Paper Size
Set paper size
to be scanned A4,
B5 or Letter (LTR)
Zoom, Contrast,
Paper type
Press to select Zoom,
Contrast and Paper type.
Use the Adjust buttons to
change the settings.
Number of
Copies Adjust
Sets the number of
copies and used to
change the settings

At a glance - back view
USB socket
Connects the USB cable to your PC
Power input socket

Introduction
Unpacking
When you unpack your BT MultiJet 3000
you should have:
• BT MultiJet 3000
• User Guide and PC software on CD
• Colour Ink Cartridge
• Black Ink Cartridge
• Mains cable
• Power Supply Adapter
• USB cable
For your records
It may help to record the following information in case
you need to contact the Helpline
Date of purchase
Place of purchase
Serial number (on rear of unit)
(Proof of purchase is required for guarantee purposes,
so please keep your receipt)

Safety information
General
Only use the power supply adaptor included with your
product. Using an other power supply will invalidate
your warranty and may damage the machine.
Never put foreign bodies into the machine. Their
accidental contact with powered parts may cause a fire or
electric shocks.
Disconnect the machine before you clean it.
Do not use liquid or aerosol cleaners to clean
the machine.
Do not attempt to service the machine or lubricate
moving parts yourself.
Do not expose to direct sunlight.
Do not stand your machine on carpets or other surfaces
which generate fibres, or place it in locations preventing
free flow of air over its surfaces.
Do not use your machine near water or spill liquid of any
kind into it. Do not use it in damp or humid conditions
such as bathrooms.
Do not expose your machine to fire, explosive or other
hazardous conditions.
When the top cover is open, do not look directly at the
scanner light in operation.

Setting up
Planning the location of your BT MultiJet 3000
Place your BT MultiJet 3000 on a stable and flat surface.
DO NOT CONNECT TO THE POWER
SUPPLY YET.
1 Unlock the scanner.
The scanner is locked to prevent damage during
shipping. Before connecting to the power supply it must
be unlocked.
Open the front compartment. In the upper left hand side
there is a sliding lever. To unlock the scanner, push the
lever inward until it stops.
Please Note
If you do not unlock the scanner before the power is
turned on you will get an audible warning and the
message UNLOCK SCANNER. You must turn the
power off before unlocking the scanner.
2 Connect the mains power and USB cable
to the BT MultiJet 3000
If the BT MultiJet 3000 does not autostart press the
Power button.
3 Load paper
You can load up to 100 sheets of 75gsm A4 paper.
To set the paper width, press the paper tray catches and
open the paper tray.
Paper Tray Catches
Load the paper into the tray. Squeeze the paper width
guide and slide it to the edge of the paper.
Paper width guide
Lift the paper tray and press it against the back of your
BT MultiJet 3000. Make sure both catches are securely in
place to avoid mis-feeds or paper jams.
Once the paper width guide is set, you can load paper
simply by sliding it into the paper tray.
USB socket
Mains power socket

4. Install the ink cartridges:
Make sure the Power is On (the LCD display
is not blank).
Lower the front compartment cover. The ink cartridge
carrier moves to the centre loading position.
Take the black cartridge. Remove the sticker and the
tape. Insert it into the right hand compartment and push
back firmly on the cartridge until it snaps securely into
place.
Warning
DO NOT touch the gold contact area of
the print cartridge.
Repeat the procedure with the colour cartridge, placing it
on the left-hand side.
Close the front compartment cover.
5 Align the cartridges.
Your BT MultiJet 3000 automatically prints
an alignment page.
Under each group – A B C D - on the page, select the
alignment number for the pattern that comes closest to
forming a straight line. You can now set these numbers
on your machine.
The display shows the first group letter A.
Press the Adjust buttons to select the alignment
number you want for group A.
Press Start Yes to confirm selection and to
display B.
Use the Adjust buttons to select the alignment
number for group B.
Press Start Yes to confirm selection
Repeat for groups C and D.
The cartridges are now aligned.
Adjust
Yes
S
T
A
R
T
Adjust
Yes
S
T
A
R
T

6 Connect to your PC
Connect the USB cable to your PC’s USB port (the PC
can be on or off).
Important
For proper software installation, you MUST cancel
the “Add New Hardware wizard” !
7 Install the BT MultiJet 3000 software
on your PC.
Features include:
• Print from your PC.
• Scan images to your PC.
• Scan documents to email or word
processing programs.
• Scan pictures for the Internet.
• Send or receive faxes.
The CD contains:
• Printer Driver – enables your PC to work with your
BT MultiJet 3000 for printing.
• Scanner Driver - enables your PC work with your
BT MultiJet 3000 for scanning.
• Unimessage Pro – manages your fax and
email messages.