BT Big Button 100 User manual

BT Big Button 100
User Guide

If you need any assistance with your product, please visit www.bt.com/producthelp
nLarge buttons for easy dialling.
nHandsfree – make and receive calls using the
loudspeaker.
nOne-touch 1571 button dials your network
answering service.
nEasy grip handset.
nAdjustable earpiece and microphone volume .
n3one-touch buttons for easy dialling of your
most important numbers.
nStore up to 10 more numbers in the memory.
nLast number redial.
nSecrecy – stop your caller hearing you talk to
someone else in the room.
Welcome…
to your BT Big Button 100 phone

Section
If you need any assistance with your product, please visit www.bt.com/producthelp
This User Guide provides you with all
the information you need to get the
most from your phone.
Before you make your first call you will
need to set up your phone. Follow the
simple instructions in ‘Getting Started’,
on the next few pages.
nHearing aid friendly
The BT Big Button 100 is fitted with an inductive coupler
so it is compatible with hearing aids.
nNeed help?
If you have any problems setting up or using your
BT Big Button 100, please refer to the Help section
on page 19.Additional answers to Frequently Asked
Questions are also available from www.bt.com/producthelp
Got everything?
nBT Big Button 100
n4xAA batteries
nTelephone line cord
nDesk or wall mounting
plinth
nWall mounting plugs
and screws

Getting started
Location . . . . . . . . . . . . . . . . . . . . . . .5
Insert batteries . . . . . . . . . . . . . . . . . .5
Connect telephone line . . . . . . . . . . . .5
Connect plinth for desk mounting . . . .6
Getting to know your phone
Front . . . . . . . . . . . . . . . . . . . . . . . . . .7
Underside . . . . . . . . . . . . . . . . . . . . . .8
Using the phone
Making calls . . . . . . . . . . . . . . . . . . . .9
Receiving calls . . . . . . . . . . . . . . . . . . .9
Incoming/Outgoing handset volume . .9
Handsfree calls . . . . . . . . . . . . . . . . . .10
Adjust speaker volume . . . . . . . . . . . . .10
Redial . . . . . . . . . . . . . . . . . . . . . . . . .10
Secrecy . . . . . . . . . . . . . . . . . . . . . . . .10
1571 Message waiting . . . . . . . . . . . . .11
Ringer volume . . . . . . . . . . . . . . . . . . .12
Ringer tone . . . . . . . . . . . . . . . . . . . . .13
Recall .........................13
Enter a pause . . . . . . . . . . . . . . . . . . .13
Default settings . . . . . . . . . . . . . . . . . .14
One-touch memory buttons
Store a number . . . . . . . . . . . . . . . . . .15
Dial a number . . . . . . . . . . . . . . . . . . .15
Edit a number . . . . . . . . . . . . . . . . . . .15
Delete a number . . . . . . . . . . . . . . . . .16
10 Number memory
Store a number . . . . . . . . . . . . . . . . . .17
Dial a number . . . . . . . . . . . . . . . . . . .17
Edit a number . . . . . . . . . . . . . . . . . . .18
Delete a number . . . . . . . . . . . . . . . . .18
Help ..........................19
General information
Safety . . . . . . . . . . . . . . . . . . . . . . . . .20
Cleaning . . . . . . . . . . . . . . . . . . . . . . .20
Environmental . . . . . . . . . . . . . . . . . . .20
Guarantee . . . . . . . . . . . . . . . . . . . . . .21
Returning your phone . . . . . . . . . . . . .22
How many telephones can you have? . .22
For your records . . . . . . . . . . . . . . . . .23
Wall mounting ..................24
4 In this guide
If you need any assistance with your product, please visit www.bt.com/producthelp

WARNING
Do not place your BT Big
Button 100 in the bathroom.
Battery low warning
When the batteries are due
to be replaced the 1571
message indicator light will
give a short flash every 2
seconds.
If the back-up batteries are
flat or not installed, your
BTBig Button 100 will retain
stored number information
for up to 5 minutes if
disconnected from the line.
Replacing the batteries
If you ever need to remove the
batteries, firstly ensure that
the phone is disconnected
from the telephone line, then
simply open the battery
compartment cover and pull
the ribbon away from the base
to release the batteries.
Location
You need to place your BT Big Button 100 within 2 metres
of the telephone socket so that the cable will reach.
You can also mount your BT Big Button 100 phone
on the wall using the screws and wall plugs provided.
For wall mounting instructions, see page 24.
1. Install 4 x AA back-up batteries
Place batteries on top of red ribbon. The back up
batteries will enable your loudspeaker, and 1571
indication to work and keep your stored one-touch and
10 memory numbers in the event of line disconnection.
2. Connect the telephone line
Plug the line cord into the BT Big Button 100 and the
other end into the telephone line wall socket.
Getting started 5
If you need any assistance with your product, please visit www.bt.com/producthelp
Ringer
Tone
R
R1
R2
R3
i
o
ff
ut
HANDSET
LINE
WALL WALL
D
Mode
TE
TB
B

6 Getting started
3. Connect the plinth for desk mounting
If you are going to place your product on a desk or table
then attach the plinth in the desk mounting position as
shown below.
Slide the plinth into the lugs marked DESK on the
underside of the product.
Lock/unlock
switch
Desk
mounting
lugs
Once correctly inserted, turn the switch to lock the plinth
into place.
Desk mounting
position
For wall mounting instructions, see page 24.
If you need any assistance with your product, please visit www.bt.com/producthelp

If you need any assistance with your product, please visit www.bt.com/producthelp
123
456
789
0
Memory
Redial
1571
Secrecy
R
Handsfree
V
o
l
u
m
e
V
o
l
u
m
e
BT Big Button 100
Messages
M1
M2
M3
M4
M5
M6
M7
M8
M9
M0
D
E
F
A
B
C
J
K
L
M
N
O
T
U
V
W
X
Y
Z
G
H
I
P
Q
R
S
Store
Store
(Button located
under the label.)
Used to store
numbers in the
memory, pages 15
and 17.
One-touch buttons
Dial a stored number
by pressing one
button. page 15.
Handsfree indicator
Comes on when the
speaker is switched
on.
Recall (R)
For use with
switchboards,
page 13.
Secrecy
Stops your caller
from hearing you.
Flashes when in use,
page 10.
Indicator light**
Flashes when you have
an incoming call.
Memory
Used to dial numbers
in the 10 number
memory, page 17.
Redial
Redial the last number
called, page 10.
Messages 1571*
Press to dial your
network answering
service. Flashes when
you have a message
or low battery power,
page 11.
Handsfree
Press to make and
receive using the
loudspeaker, page 10.
Front
Getting to know your phone
*Requires subscription to your network’s
answering or call minder service.
**Light may emit one very quick flash
every 30 minutes if you have subscribed
to a 1571 service; this is caused when
the telephone checks the line for
new messages.
Volume
Adjust the speaker volume, page 10.
Adjust the volume of your voice to
help your caller hear you, page 9.
7

If you need any assistance with your product, please visit www.bt.com/producthelp
Ringer
Tone
Ringer
Volume
Amplify
R1
R2
R3
Hi
Lo
Off
In
Out
WALL W
Mode
TE
TB
BATTERY LOCK
8 Getting to know your phone
Ringer tone
Lets you set the tone of the ringer,
High, Mid or Low.
Ringer volume
Set the ringer volume High, Low, Off.
Mode selector
Lets you interact with exchange
services. Normal setting is TB.
Incoming/Outgoing volume
switch
Lets you adjust the volume for
your caller’s voice or your voice,
page 9.
Ringer
Tone
Ringer
Volume
Amplify
R1
R2
R3
Hi
Lo
Off
In
Out
WALL W
Mode
TE
TB
BATTERY LOCK
Underside

Making calls
1. Lift the handset.
2. Dial the number you want. When the caller answers,
simply speak as normal.
3. To end a call, replace the handset.
Receiving calls
1. When the phone rings, lift the handset.
Incoming/Outgoing handset volume
Incoming –adjust the volume of your caller’s voice in
the earpiece.
Outgoing –adjust the volume of your voice for your
caller’s earpiece.
1. Set the switch on the underside of the base to Incoming
or Outgoing.
2. During a call, press Vol or to raise or lower
the volume.
V
o
l
u
m
e
V
o
l
u
m
e
V
o
l
u
m
e
V
o
l
u
m
e
Using the phone 9
If you need any assistance with your product, please visit www.bt.com/producthelp
Ringer
Tone
Ringer
Volume
Amplify
R1
R2
R3
Hi
Lo
Off
In
Out
Mode
TE
TB

10
If you need any assistance with your product, please visit www.bt.com/producthelp
Using the phone
Handsfree calls
1. Press . You can hear the dial tone.
2. Dial the number. When the caller answers, speak close
to the phone.
Adjust speaker volume
1. During a handsfree call, press Vol or to raise
or lower the speaker volume.
Redial
You can redial the last number called.
1. Lift the handset or press , then to dial
the last number.
Secrecy
You can stop your caller hearing you so you can talk
privately to someone else close by.
1. During a call, press . The indicator light flashes.
2. Press again to resume your call.
Secrecy
Secrecy
Redial
Handsfree
V
o
l
u
m
e
V
o
l
u
m
e
V
o
l
u
m
e
V
o
l
u
m
e
Handsfree
The loudspeaker has 5
volume levels. The default
setting is 3.
The handset has five volume
levels to adjust the incoming
voice and three volume levels
to adjust the outgoing voice,
the default setting is
minimum.

Using the phone
1571 Message waiting
Providing you have subscribed to your network’s
answering service (e.g. BT Answer 1571 or Call Minder),
callers can record messages if you do not answer your
phone.
BT Answer 1571 and Call Minder are automated services
located at your local telephone exchange which will take
messages when you are out, engaged on another call or
on the Internet.
BT Answer 1571 is a basic answering service and is
completely free of charge to BT customers. To activate
the service, dial Freefone 0800 003 800.
For information on Call Minder, call BTon Freefone
0800 800 150.This is a chargeable service.
Your BTBig Button 100 has a quick access facility to
BT’s 1571 service.
11
If you need any assistance with your product, please visit www.bt.com/producthelp

12
If you need any assistance with your product, please visit www.bt.com/producthelp
To listen to your voice messages:
1. If you have new messages, the 1571 button on your
BT Big Button 100 flashes.
2. To listen to your messages, lift the handset or press
, then press .
Ringer volume
There are three settings, Hi,Mid or Off.
1. On the underside of your BTBig Button 100, set the
Ringer Volume switch to the setting you want.
Messages
Handsfree
Using the phone
Ringer
Tone
Ringer
Volume
A
R1
R2
R3
Hi
Lo
Off
In
Out
TE
TB
123
456
789
0
Memory
Redial
1571
Secrecy
R
Handsfree
V
o
l
u
m
e
V
o
l
u
m
e
BT Big Button 100
Messages
M1
M2
M3
M4
M5
M6
M7
M8
M9
M0
D
E
F
A
B
C
J
K
L
M
N
O
T
U
V
W
X
Y
Z
G
H
I
P
Q
R
S
Store
1571 Indicator light

Using the phone
Ringer tone
There are three settings, R1,R2 or R3.
1. On the underside of your BT Big Button 100, set the
Ringer tone switch to the setting you want.
Recall
The button is used to access a range of switchboard
services, for example, to transfer calls and with some
BTCalling Features or services available via your network
provider.
Enter a pause
If your BTBig Button 100 phone is connected to a
switchboard, you may need to enter a Pause in a stored
number after the switchboard access code in order to
give your phone time to get an outside line.
1. When storing a number press where you want to
enter a pause. This will put a delay of 2.5 seconds in the
number to be dialled.
Redial
R
Apause can be stored in the
3one-touch and 10 memory
phone numbers.
Ringer
Tone
Ringer
Volume
Amplify
R1
R2
R3
Hi
Lo
Off
In
Out
Mode
TE
TB
13
If you need any assistance with your product, please visit www.bt.com/producthelp

14
If you need any assistance with your product, please visit www.bt.com/producthelp
Default settings
Using the phone
Feature Default settings
Ringer volume High
Ringer tone R1
Speaker volume Level 3 (of 5)
Handset amplifier Level 1 (minimum)

You can store up to three numbers using the one-touch
buttons.
Each stored phone number can be up to 32 digits long.
Store a number in the one-touch memory
1. Remove the one-touch memory label as the store button
is located underneath. Lift the handset or press .
2. Press then press the one-touch button, you will hear
abutton press confirmation tone throughout the process.
3. Enter the number you want to store.
4. Press . You hear a longer confirmation beep.
The number is stored.
Dial a number in the one-touch memory
1. Lift the handset or press .
2. Press the one-touch button. The number stored for that
button is dialled.
Edit a number in the one-touch memory
1. To change a one-touch dial number, simply store a new
one. This will overwrite any existing stored number.
Handsfree
Store
Store
Handsfree
One-touch memory buttons 15
If you need any assistance with your product, please visit www.bt.com/producthelp
You may hear an exchange
announcement, during or
after the storing sequence,
suggesting that there has
been an error, or that you
should redial the number.
This is normal and does not
mean that the storing
sequence is in error.
You can make a note of your
one-touch numbers on the
label above the store button.
There is also an enlarged
label at the back of this
guide if you prefer.

16
If you need any assistance with your product, please visit www.bt.com/producthelp
Delete a number in the one-touch memory
1. Lift the handset or press .
2. Press then the one-touch button.
3. Press to confirm. You hear a confirmation beep.
4. Replace the handset or press .
Handsfree
Store
Store
Handsfree
One-touch memory buttons

You can use the -buttons on the keypad to store
and dial a total of 10 phone numbers. Each stored phone
number can be up to 32 digits long.
Store a number in the 10 number memory
Remove the one-touch number memory label to reveal
the button.
1. Lift the handset or press .
2. Press .
3. Press the -button you want to use as the memory
location.
4. Enter the phone number you want (up to 32 digits).
5. Press to confirm. You hear a confirmation beep.
The number is stored.
Dial a number in the 10 number memory
1. Lift the handset or press .
2. Press then press the -button you want.
The stored phone number is dialled.
Memory
Handsfree
Store
Store
Handsfree
Store
Tocancel storing a number,
replace the handset.
You can make a note of your
memory numbers on the
label underneath the
handset. There is also an
enlarged label at the back
of this guide if you prefer.
10 Number memory 17
If you need any assistance with your product, please visit www.bt.com/producthelp
You may hear an exchange
announcement, during or
after the storing sequence,
suggesting that there has
been an error, or that you
should redial the number.
This is normal and does not
mean that the storing
sequence is in error.

18
If you need any assistance with your product, please visit www.bt.com/producthelp
Edit a number in the 10 number memory
1. To change a stored number, simply store a new one.
This will overwrite any existing stored number.
Delete a number in the 10 number memory
1. Lift the handset or press .
2. Press then the -memory location you want
to delete.
3. Press to confirm. You hear a confirmation beep.
4. Replace the handset or press .
Handsfree
Store
Store
Handsfree
10 Number memory

Help
Flashing 1571 button, but no messages
nThe batteries may be dead. Replace the batteries.
No dial tone
nCheck that the telephone line cord is plugged into the phone socket, see page 5.
Phone does not ring
nCheck that the Ringer Volume is not set to Off?, see page 12.
nYou may have too many phones, fax machines and/or answering machines plugged in which
might be overloading the sockets. See ‘Technical Information’, page 22.
One-touch buttons and Quick dial number have disappeared
nReplace batteries and re-enter numbers, see pages 5, 15 and 17.
Cannot hear the phone ring
nSet ringer volume to Hi and change the ringer tone settings, see pages 12-13.
19
If you need any assistance with your product, please visit www.bt.com/producthelp

This product is intended for connection to analogue public switched telephone networks
and private switchboards in the United Kingdom.
Safety
nDo not open the BT Big Button 100 phone. This could expose you to high voltages or
other risks.
nNever dispose of batteries in a fire. There is a serious risk of explosion and/or the release
of highly toxic chemicals.
Cleaning
Simply clean your BTBig Button 100 with a damp (not wet) cloth, or an anti-static wipe.
Never use household polish as this may damage the product. Never use a dry cloth as this
may cause a static shock.
Environmental
nDo not stand your BTBig Button 100 on carpets or other surfaces which generate fibres,
or place it in locations preventing the free flow of air over its surface.
nDo not submerge any part of your product in water.
nDo not expose your product to fire, explosive or other hazardous conditions.
nThere is a slight chance that your phone could be damaged by an electrical storm.
Werecommend that you unplug the telephone line cord for the duration of the storm.
General information 20
If you need any assistance with your product, please visit www.bt.com/producthelp