BuckEye Cam X Series Operating and maintenance instructions

X-Series PC Base Quick Start Guide
Install X-Series Network Attach antenna to PC Base. Connect PC Base to the
Manager and Modem river computer with USB cable.
Use the supplied installation disk
or download the software from
www.buckeyecam.com
Start X-Series Network Click the Connect button. Click the one button.
Manager and click the
PCBase icon.

X-Series PC Base Quick Start Guide
Attach antenna to camera. Install UB1270 battery Connect battery pack to
into battery pack. camera with the supplied
(Red wire is +) cable.
(Female end to camera)
Open the camera Click on Add/Remove evice. rag and drop the camera icon
enclosure. Into the network view.
Wait for the following message
to appear on the display.
Repeat steps 7 through 11
for all of the cameras that you have.
Software video tutorials are available at www.buckeyecam.com