BUTTON FUNCTIONS
Power button: hold for 8 seconds to power on the headphones
and begin Bluetooth®pairing. Hold for 4 seconds to power off.
Press once to play/pause or answer/end calls. Double press
to redial the last dialled phone number. Hold for 1-2 seconds
to reject an incoming call.
Volume down/Previous track: press to decrease volume, hold
to skip to the previous track.
Volume up/Next track: press to increase volume, hold to skip
to the next track.
Active noise cancelling on/off: Press to turn Noise Cancelling on/off.
The green Noise Cancelling LED indicator will light up when Noise
Cancelling is on.
CHARGING
1. Connect the micro-USB end of the charging cable with the
micro-USB port on the right earcup of the headphones and connect
the USB end to your computer or USB charger.
2. The LED indicator will light up red during charging.
3. When the headphones are fully charged the LED indicator will
change to blue.
Note: charge time is approximately 2 hours.
BLUETOOTH®PAIRING
1. Hold the Power button for approximately 8 seconds to turn on.
2. The headphones will sound “power on”. The LED indicator light
will alternate red and blue when the headphones are ready to pair.
3. Open Bluetooth®settings on your smartphone, tablet, computer,
ensure Bluetooth®is on and search for devices.
4. Select “BD-NCHBT-1” from the list of available devices.
The LED indicator will light up red when the headphones are
successfully paired.
5. Once paired, the headphones will automatically connect to
the last device they were connected to if it is on and in range.
Note: headphones will automatically turn off after 10 minutes
of inactivity to save battery.
PLAYING MUSIC
Once the headphones are turned on and connected, open your
favourite music app and press play.
Control your music and volume via your device or the on headphone
controls.
All audio, including music, games, videos and notifications will play
through the headphones.
TROUBLESHOOTING
Headphones
won’t turn on
Music will not play
via Bluetooth®
Bluetooth®device
will not connect
to headphones
TECHNICAL SPECIFICATIONS
Bluetooth: V5.0, 10m range
Battery: 300mAh
Charge time: 2 hours
Play time: 18 hours
Charging: micro-USB
Driver: 2x40mm
Frequency response: 20-20,000Hz
Sensitivity: 110dB +/-3dB
Impedance: 32Ohm S.P.L. (at 1KHz)
Active noise cancelling: -18dB
Recharge your headphones using
the included micro-USB charging cable
Ensure your device and headphones
are both on and paired. Restart your
headphones to reconnect your device.
Open Bluetooth®settings on your device,
select BD-NCHBT-1 and tap Forget.
Follow the steps above to reconnect
your device.
