Buffalo GF239 User manual

Induction Cooker
Instruction manual
Model: GF239
Any questions? Contact us at
www.eventservicesgroup.co.uk
Telephone: [phone]

1
UK
Safety Tips
• Position on a flat, stable surface.
• A service agent/qualified technician should carry out installation and any repairs if required. Do not
remove any components on this product.
• Consult Local and National Standards to comply with the following:
• Health and Safety at Work Legislation
• BS EN Codes of Practice
• Fire Precautions
• IEE Wiring Regulations
• Building Regulations
• DO NOT immerse the appliance in water.
• DO NOT leave the appliance unattended during operation.
• DO NOT move the appliance during cooking or with hot cookware on top of it.
•DONOTusecookwarewithadiameter less than 12cm.
• DO NOT place empty cookware on the appliance.
• DO NOT place any magnetic objects on the glass surface during operation.
• DO NOT place metal objects/utensils on the appliance as they may become hot during operation.
• People with a pacemaker fitted should not use the appliance and keep a minimum of 60cm from the
appliance during operation.
• Always switch off and isolate the power supply to the appliance when not in use.
• Not suitable for outdoor use.
• If the glass surface is cracked isolate from the power supply and consult your Buffalo agent or
recommended qualified technician.
• Keep all packaging away from children. Dispose of the packaging in accordance to the regulations of
local authorities.
• If the power cord is damaged, it must be replaced by an BUFFALO agent or a recommended qualified
technician in order to avoid a hazard.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge, unless they have been given supervision
or instruction concerning use of the apliance by a person reponsible for their safety.
Introduction
Please take a few moments to carefully read through this manual. Correct maintenance and operation of
this machine will provide the best possible performance from your BUFFALO product.
Pack Contents
The following is included:
•BUFFALOInductionCooker
Any questions? Contact us at www.eventservicesgroup.co.uk
Telephone: [phone]

2
UK
Telephone Helpline: 0845 146 2887 (United Kingdom)
Installation
Maintain a distance of 15cm (6 inches) between the appliance and walls or other objects. Installation
must be carried out by a qualified technician.
Operation
Cookware
Suitable cookware includes:
• All magnetic pans
• Mild steel or plain steel (black iron) pans
• Enamelled/non-enamelled cast iron and iron pans
Unsuitable cookware includes:
• Cookware with a diameter of less than 12cm
• Ceramic or glass cookware
• Stainless steel, aluminium, bronze or copper cookware unless marked as suitable for induction cooking
• Cookware with feet
• Cookware with a rounded bottom (e.g. wok)
Induction Cooking
Induction cooking is a very efficient method of cooking as it reduces heat loss between the pan and the
atmosphere by as much as 40%. This makes it extremely energy efficient, as well as offering immediate
heat-up, unlike traditional heating methods which require time to get to temperature.
The Induction cooker works by creating a magnetic field within suitable cookware, which causes an instant
build-up of heat to cook the food.
Operation
1. Connect the appliance to the mains power supply.
2. Place suitable cookware on to the centre of the glass plate.
3. Turn the dial to the desired power as indicated on the display.
4. If the pan is removed or the wrong type of pan is used, the appliance will make a beeping noise and
switch off after approximately 60 seconds.
Note: Never place empty
cookware on the appliance.
Any questions? Contact us at www.eventservicesgroup.co.uk
Telephone: [phone]

3
UK
Cleaning, Care & Maintenance
• Isolate the power supply and allow the appliance to cool before cleaning.
• Use warm, soapy water and a damp cloth to clean the appliance.
• DO NOT use abrasive cleaners or pads.
•Drythoroughlyafter cleaning.
• A BUFFALO dealer or qualified technician should carry out repairs if required.
Troubleshootin g
If your BUFFALO appliance develops a fault, please check the following table before making a call to the
Helpline.
Technical Specifications
Electrical Wiring
This appliance must be installed by a qualified technician.
The plug is to be connected to a suitable mains socket.
This appliance is wired as follows:
• Live wire (coloured brown) to terminal marked L
•Neutral wire (coloured blue) to terminal marked N
•Earth wire (coloured green/yellow) to terminal marked E
Error Message Cause Solution
Unit Beeps No pan or pan not suitable
for induction cooking
Use pan suitable for induction cooking such as
Vogue Stainless Steel Range
E01 Unit has over heated Ensure ventilation filter (located underneath
unit) is clean and unblocked. Allow unit to
cool. If error code still appears after unit has
cooled contact a Buffalo agent or qualified
engineer.
E02 Pan being heated is empty,
temperature of pan is too
high
Remove pan from unit. Allow unit to cool.
Ensure pan contains product to be heated. If
error code still appears after unit has cooled
contact a Buffalo agent or qualified engineer.
E03 Power input has risen/fallen
below units operating limits.
Switch off unit. Allow unit to cool. If error code
still appears after unit has cooled contact a
Buffalo agent or qualified engineer.
Model Voltage Power
(max.) Current Power range (per ring)
Dimensions
(h x w x d) mm
Weight
(kg)
GF239 230V 50Hz 7000W 29.2A 500 - 3500W 130 x 360 x 690 15
Any questions? Contact us at www.eventservicesgroup.co.uk
Telephone: [phone]