BulletHD LITE2 User manual

Welcome
•Thanks for purchasing this BulletHD LITE2
•Please read this instruction manual to ensure correct use of the product prior to use.
•Please keep this instruction manual in a safe place.
•Please ensure that the sales store fills out the warranty with the date of purchase and
the name of the store.
•The warranty does not cover any damage that may occur during a sport activity. It is
the users responsibility to secure the action cam securely to any sport equipment.

Table of Contents
What’s in the Box
How to use
BulletHD Overview
Initial Set Up
Charging The Battery
Power on/off Your BulletHD
Date & Time Setting
MicroSD card Storage Chart
Take a Video
Take Still Pictures
Playback on your computer
On a Mac
LED Status Table
Removing/Installation Battery
Repairs
Webcam Function
Technical Specifications
Warranty
Warning
Warranty Card
What’s In The Box
1. Camcorder with Sound Cap (water resistant)
2. Camcorder Mount
3. Universal Mount
4. Roll Bar Mount
5. Battery
6. Adhesive stickers 2pcs
7. USB Cable
8. Hand Safety Strap
9. User Manual
10. Waterproof Cap

11. Rubber O-ring 6pcs
12. Silicon Grease
How to use
1.Camcorder on Handlebar
2. .Camcorder on Non-vented Helmet
Using BulletHD for Water Sports
Remind you to put some silicon grease to the rubber O-rings from time
to time, especially before using underwater. Make sure the rear cap ③
was closed tight.

BulletHD Overview
①LED ②Power / Shutter ③Rear Cap ④Mode Switch
⑤USB ⑥MicroSD Card Slot ⑦Battery ⑧Microphone
Initial Set Up
1. Make sure the BulletHD is OFF before adding or removing the memory card!
2. Screw out the rear cap (open) located at the back of the BulletHD ③.
3. Install a micro SD memory card (max up to 32GB) into the rear slot. To insert the
microSDcard, slide the micro SD card into the card slot on the back of the
BulletHD with the card label facing down. The micro SD card will click into place
once it is inserted past flush with the Bullet HD. Use your fingernail to do this. Then
screw in the rear cap till is complete lock.
4. If no micro SD memory is inserted in the Bullet HD, the LED on top of the camera
willblink red and green.
5. When using a micro SD memory card in the Bullet HD, there should be no data
from other devices on the card. If you are using a micro SD memory card for the
first time in the Bullet HD, first you should format the card in your computer.
Charging The Battery
Screw out the rear cap located at the rear of the camera ③andplug the USB
charger to the camera. The blue light is on while charging, goes off when the battery
is fully charged. On the first use charge the battery 10 hours before use! You can
record up to 125 minutes with one charge.

Power on/off Your BulletHD
Turn BulletHD
On
Turn on the BulletHD lite2 by pressing the Power/Shutter button
②forat least 3 seconds until the green LED turns on. After
releasing the button the red LED flashes twice, indicating that the
BulletHD lite2 is in standby mode.
Turn BulletHD
Off
Turn the BulletHD lite2 off by pressing the Power/Shutter button
②instandbymode until the red LED flashes. The BulletHD lite2
will switch off.
Date & Time Setting
Download the “time.txt” file from www.Bullethd.us -Support –Date & Time Quick
Setup for LITE2 720p
Open the file “time.txt” and change the date & time as follows:
YYYY.MM.DD hh:mm:ss
Y = year h=hour
M = month m = minutes
D = day s = second
Then copy the file to memory card! Now you can take a photo or video to test it!
Remember to place an optional MicroSD card before your recordings!

Take a Video
To take videos with the Bullet HD, make sure that the Video/Photo switch ④is set to
the right for video mode. Turn on the Bullet HD by pressing the Power button ②.
Press the Power/Shutter button ②shortly to start a video recording. The red LED
will blink while the video is recording. Press the Power/Shutter button ②again to
stop recording.
Take Still Pictures
To take still pictures with the Bullet HD, make sure that the Video/Photo switch ④is
set to the left for photo mode. Turn on the Bullet HD by pressing the Power button ②.
Press the Power/Shutter ②button to start taking photos, the red LED will blink.
Press the Power/Shutter button ②againtostoptakingphotosandtogobacktothe
standby mode.
In photo mode the Bullet HD will take sequentially photos every 3 seconds. It stops
automatically if the battery is empty or if the micro SD card is full.
Playback On Your Computer
Screw the rear cap ③, power on the BulletHD, connect with your computer via USB
cable from the USB port ⑤. The camera will be recognized automatically as USB
Device. Or you can take out the micro SD card and use your own card reader to
connect with your computer too.

The device must be power on while connected with computer for data
download. Don’t remove the battery!
When you remove the battery while the video is playing, damage to your
video data could occur!
On a MAC
Simply plug the BulletHD into your MAC with the included USB cable, turn your
BulletHD on, and the MAC OS will recognize the BulletHD as an external hard drive.
IMPORTANT TIP FOR MAC USERS
When deleting files from your MicroSD cards you must empty the trash before
removing it or unplugging the BulletHD. If you do not empty your trash the photos
and videos files will not be completely erased from your cards.
REMARKS: THE SPECIFICATION IS SUBJECT TO CHANGE WITHOUT NOTICE.

Removing/Installation Battery
The battery is designed to have a very tight fix to maximize reliability in high vibration
activities. To remove the battery, pull it out with the battery holder.
It is intentionally not easy to do, but the battery will come out.
Additional batteries and mount packages are available at www.BulletHD.us
Repairs
Since most helmet cameras are used for recording extreme sports or outdoors
activity. Like this and you will probably end up with a broken camera which warranty
does not cover any damage that may occur during a sport activity.
Check with us before giving up on your BulletHD!
http://www.BulletHD.us/repairs/
You might be able to fix your BulletHD even if you think they are broken and beyond
hope. We're the great problem-solvers, and you are able to fix at home whatever is
possible to repair your BulletHD with your hands.
We want to help you get the full value from your camcorder; there are tutorial videos
to show you how to repair your cam at our YouTube channel,
http://www.youtube.com/bulletHDcam
This is easy and simply! We are users too!
Webcam Function
This is not necessary to install the driver to view videos or pictures. The driver is only
necessary to install when using the BulletHD as a webcam which is available for
Windows OS system only.
For details information at www.bullethd.us -Support –Webcam Drivers

Technical Specifications:
Optics:
• WIDE ANGLE view
• f/2.4, fixed focus glass lens
Video:
• HD Resolution Settings: 720p: 1280x 720 @30fps
• Sensor Type: 1 / 4” HD CMOS
• Light Sensitivity: 1.4 V/lux-sec (550nm)
• Video Format: MJPG codec, .AVI file format
• Exposure Control : Auto
• White Balance: Auto
Audio:
• Built-in microphone
Photo:
• Resolution: 2560 x 1920
• Camera: 5.0 Mega Pixels
• Format: JPEG
• Capture mode: Auto snapshot every 3 seconds
Storage:
• Memory: Micro SD card, support Max up to 32GB capacity
(recommendedClass6orabove)
• Avg. Record Time: 10~15min/GB
Product size: 84 x 30 x 30 mm
Weight: 84g
Operating System (for USB drive): Win ME, 2000, XP, Vista, 7; Mac OS X 10.6+

Warranty:
Your BulletHD Wearable Sports Camcorder is covered by a 365 days Limited
Warranty on parts and labor from the date of original purchase, and purchases must
be made through an authorized dealer. The warranty covers defects in workmanship
and materials. The warranty does not apply to units, which have been damaged or
abused intentionally or unintentionally. Purchase from individuals or unauthorized
internet sites voids the warranty. The warranty does not apply to units where the rear
cap was incorrect closed.
Tampering with or altering the unit will void the warranty. Any unauthorized service
will void the warranty. Original sales receipt must be produced for any warranty
service and a return authorization must be obtained from our customer service points.
The warranty does not cover any damage that may occur during a sport activity. It is
the users responsibility to secure the BulletHD securely to any sport equipment.
Warning:
The form and functions of BULLETHD, accessories, logos, and all graphics are the
patented, protected property of Silver Creation International Ltd. Any attempt by
anyone other than our authorized dealers to copy or reproduce any of the above
without permission of SCi will be met with legal action. SCi products are available for
purchase only from authorized dealers.

Technical changes and mistakes reserved!
Due to rapid technical development, products are under constant changes / improvements
-please check www.BulletHD.us for current updates.

Environmental friendly
Let’s do something for our planet!!
Please download the drivers & software
fromourofficialwebpage.