BulletHD PRO 4 User manual

Welcome
•Thanks for purchasing this BulletHD PRO4
•Please read this instruction manual to ensure correct use of
the product prior to use.
•Please keep this instruction manual in a safe place.
•Please ensure that the sales store fills out the warranty with
the date of purchase and the name of the store.
•The warranty does not cover any damage that may occur
during a sport activity. It is the users responsibility to
secure the action cam securely to any sport equipment.
www.e-vilka.ru

Contents
What’s in the Box
How to use
BulletHD Overview
Initial Set Up
Charging The Battery
Power on/off Your BulletHD
Date & Time Setting
Micro SD card Storage Chart
Take a Video
Take Still Pictures
Playback on your computer
On a Mac
LED Status Table
Removing/Installation Battery
Repairs
Webcam Function
Technical Specifications
Warranty
Warning
Warranty Card
www.e-vilka.ru

What’s In The Box
1. Camcorder with Sound Cap (water resistant)
2. Camcorder Mount
3. Universal Mount
4. Roll Bar Mount
5. Curved Mount
6. Battery
7. USB Cable
8. Adhesive Stickers 5pcs
9. Magic Tape 2pcs
10. Hand Safety Strap
11. User Manual
12. Waterproof Cap
13. Rubber O-ring 6pcs
14. Silicon Grease
www.e-vilka.ru

How to use
1. Camera on handlebar
2. Camera on vented helmet
3. Camera on top of helmet / any curved surface
4.!Camera on any flat surface / tripod
www.e-vilka.ru

BulletHD OVERVIEW
①LED ②Power / Shutter ③Rear Cap ④Mode Switch
⑤USB ⑥Micro SD Card Slot ⑦Battery ⑧Microphone
⑨!1080P / 720P Mode Switch
Initial Set Up
1. Make sure the BulletHD is OFF before adding or removing the
memory card!
2. Screw out the rear cap (open) located at the back of the BulletHD ③.
3. Install a micro SD memory card (max up to 64GB(FAT32)) into the
rear slot. To insert the micro SD card, slide the micro SD card into the
card slot on the back of the BulletHD with the card label facing down.
The micro SD card will click into place once it is inserted past flush with
the BulletHD. Use your fingernail to do this. Then screw in the rear cap
till is complete lock.
4. If no micro SD memory is inserted in the BulletHD, the LED on top of
the camera will blink red and blue.
5. When using a micro SD memory card in the BulletHD, there should
be no data from other devices on the card. If you are using a micro SD
memory card for the first time in the BulletHD, first you should format
the card in your computer.
www.e-vilka.ru

Using BulletHD for Water Sports
Remind you to put some silicon grease to the rubber O-ring from time to
time, especially before using underwater. Make sure the rear cap ③was
closed tight.
Charging The Battery
Screw out the rear cap located at the rear of the camera ③and Plug the USB charger to
the camera. The green light is on while charging, goes off when the battery is fully charged.
On the first use charge the battery 10 hours before use! You can record up to 90 minutes
with one charge.
Power on/off Your BulletHD
Turn BulletHD On
Turn on the BulletHD by pressing the Power/Shutter
button ②for at least 3 seconds until the blue LED turns
on. The camera will vibrate once long. After releasing the
button the red LED flashes and beep three times,
indicating that the BulletHD is in standby mode.
Turn BulletHD Off
Turn the BulletHD off by pressing the Power/Shutter
button ②in standby mode until the red LED flashes. The
BulletHD will short vibrate twice and beep 6 times and
will switch off.
Remember to insert a micro SD card before you start taking videos or pictures!
www.e-vilka.ru

Date & Time Setting
Open the file “time.txt” and change the date & time as follows:
(1) YYYY.MM.DD hh:mm:ss
Y = year h = hour
M = month m = minutes
D = day s = second
(2) Video Segmentation
The default setting is 5min. You may choose
10min/15min/20min/30min.
(3) Y/N?
Y = show the date & time stamp on videos and photos
N = do not show the date & time stamp on videos and photos
(4) Loop
The default setting is OFF. You may turn on the LOOP function.
(Remarks: Only compatible with 5min and 15min)
Then copy the file to memory card! Now you can take a photo or
video to test it!
www.e-vilka.ru

Take a Video
To take videos with the BulletHD, make sure that the Video/Photo
switch ④is set in the video mode. Then, choose 1080p/720p by
switching 1080P/720P switch ⑨. Turn on the BulletHD by pressing
the Power button ②.
Press the Power/Shutter button ②, it will beep once and vibrate
once to start a video recording. The red LED will blink while the
video is recording. Press the Power/Shutter button ②again, it will
beep twice and vibrate once to stop recording.
Take Still Pictures
To take still pictures with the BulletHD, make sure that the
Video/Photo switch ④is set to the left for photo mode. You may
choose 5MP/12MP by switching 1080P/720P switch ⑨
(1080P=5MP / 720P=12MP). Turn on the BulletHD by pressing the
Power button ②.
Press the Power/Shutter ②button to start taking photos, the red
LED will blink and it will beep once. Press the Power/Shutter button
②again and it will beep twice to stop taking photos and to go back
to the standby mode.
In photo mode the BulletHD will take sequentially photos every 3
seconds. It stops automatically if the battery is empty or if the micro
SD card is full.
Alert: Please note that the camera can be stopped only when red
LED is ON. When green LED is ON, it indicates that the file is
saved onto the micro SD card and hence cannot be stopped at this
stage.
www.e-vilka.ru

Playback On Your Computer
Screw the rear cap ③, set the1080P/720P switch ⑨to 720P. Then,
power on the BulletHD and connect with your computer via USB
cable from the USB port ⑤. The camera will be recognized
automatically as USB Device. Or you can take out the micro SD
card and use your own card reader to connect with your computer
too.
The device must be power on while connected with
computer for data download. Don’t remove the
battery! The camera will be recognized as a storage
device on PC only when mode switch is set to video.
When you remove the battery while the video is
playing, damage to your video data could occur!
On a MAC
Simply plug the BulletHD into your MAC with the included USB
cable, turn your BulletHD on, and the MAC OS will recognize the
BulletHD as an external hard drive. Ensure that the camera is set to
video mode before connection to MAC.
www.e-vilka.ru

IMPORTANT TIP FOR MAC USERS
When deleting files from your Micro SD cards you must empty the
trash before removing it or unplugging the BulletHD. If you do not
empty your trash the photos and videos files will not be completely
erased from your cards.
REMARKS:
THE SPECIFICATION IS SUBJECT TO CHANGE WITHOUT NOTICE.
Removing/Installation Battery
The battery is designed to have a very tight fix to maximize
reliability in high vibration activities. To remove the battery, pull it
out with the battery holder.
It is intentionally not easy to do, but the battery will come out.
www.e-vilka.ru