Bunn PTD 4 Quick reference guide

USE & CARE INSTRUCTIONS
INTRODUCTION
This server allows portable dispensing of up to 4-gallons of iced tea. It should be placed either on a Bunn Iced
Tea brewer or on a PTD 4 stand.
CLEANING
CAUTION - CLEAN AND SANITIZE YOUR ICED TEA DISPENSER DAILY
1. Twist the faucet wing nut(12) in a clockwise direction and remove the faucet(5) from the dispenser.
2. Thoroughly clean the entire inside surface of the dispenser and the faucet shank(13) using the #00674.0000
brush using a mild detergent and water solution. Rinse the dispenser and shank with warm water.
3. Disassemble the faucet(5). The faucet cleaning procedure requires a 3-compartment sink. Thoroughly wash
all faucet parts in a mild detergent and water solution in the first sink. Rinse the parts in hot water in the second
sink. Sanitize the parts for one minute in 75°warm chlorine solution (at least 50 ppm) in the third sink.
Reassemble the faucet and attach it to the dispenser.
4. Sanitize all exposed surfaces of the dispenser with a 75°warm chlorine solution (at least 100 ppm). Empty
the dispenser and thoroughly rinse everything.
5. Wash the entire outside surface of the dispenser with a clean damp cloth.
CAUTION - DO NOT KEEP BREWED ICED TEA OVERNIGHT.
PTD 4
BUNN-O-MATIC CORPORATION
POST OFFICE BOX 3227
SPRINGFIELD, ILLINOIS 62708-3227
PHONE: [phone] FAX: [phone]
www.bunnomatic.com
10291.0000 6/03 ©1988 Bunn-O-Matic

2
gal
gal
1 1
22
33
BUNN
BUNN
®PTD4
1
2
3
4
8
9
10
11
12
13
5
6
25
24
23
22
19 18 21 20 17 16 15 14 P1742
ICED TEA SERVER REPLACEMENT PARTS
7
10291 111598

3
ITEM PART NO. QTY. DESCRIPTION
1 03733.0000 1 Handle Assy, Bail - Brown
03733.0001 1 Handle Assy, Bail - Black
01326.0002 4 Screw, Truss Head #10-32 x .31"
203285.0000 1 Bushing, Lid 1.17" Dia
03285.0002 1 Bushing, Lid 1.98" Dia
303709.0000 1 Lid, Reservoir (Brew-thru 1.17" Dia Hole) (Includes item 2 and 00778.0000
Bunn Decal. Not illustrated)
03255.0002 1 Lid, Reservoir (Brew-thru 1.98" Dia Hole) (Includes item 2) (Shown)
03255.0000 1 Lid, Reservoir (Solid) (Includes 00778.0000 Bunn Decal. Not illustrated)
00778.0000 1 Decal, BUNN (Not illustrated)
403078.1002 1 Reservoir
01364.0000 2 Screw, pan head #6 x .312" (self-tapping)
5-- - - - - - - 1 Housing (Not available)
603043.0002 1 Decal, Fresh Brewed Iced Tea
703260.0000 1 Faucet Assy, Brown (Includes items 8 thru 13)
03260.0001 1 Faucet Assy, Black (Includes items 8 thru 13)
03260.0002 1 Faucet Assy, Black (Sweet / Unsweeted) (Includes items 8 thru 13)
829163.0000 1 Faucet Handle, Brown
29163.0001 1 Faucet Handle, Black
29163.0003 1 Faucet Handle, Black (Sweet / Unsweeted)
929165.0000 1 Faucet Bonnet, Brown
29165.0001 1 Faucet Bonnet, Black
10 00601.0000 1 Faucet Spring
11 29164.0000 1 Faucet Stem
12 00600.0000 1 Faucet Cup
13 - - - - - - - - 1 Faucet Body (Not available order item7)
14 03747.0000 1 Guard, Faucet
01326.0002 4 Screw, Truss Head #10-32 x .31"
15 03093.0000 1 Faucet Wing Nut, Brown
03093.0002 1 Faucet Wing Nut, Black
16 03362.0002 1 Faucet Shank, Brown
03362.0004 1 Faucet Shank, Black
17 03092.0000 1 Nut, flanged - Brown
03092.0001 1 Nut, flanged - Black
18 00958.0000 2 Nut, hex brass .50"-14 NPSM
19 03099.0000 1 Gasket
20 03754.0000 1 Gauge, Sight W/Markings - Brown
03754.0002 1 Gauge, Sight W/Markings - Black
21 00651.0000 1 Decal, BUNN
ICED TEA SERVER REPLACEMENT PARTS
(Continued)
10291 061303

4
ITEM PART NO. QTY. DESCRIPTION
22 00754.0001 4 Foot/Locator
23700.0000 4 Nut, Keps .25"-20 x .312"
23 00752.0000 4 Cover
24 03710.0000 2 Handle, Brown
03710.0002 2 Handle, Black
02325.0000 4 Screw, pan head .25"-20 x .312"
25 27294.0000 1 Decal, Reservoir Cleaning
26 00674.0000 1 Brush, cleaning (Not illustrated)
27 03362.1002 - Faucet Shank Kit, Brown (Not illustrated, Includes items 15 thru 19)
03362.1002 - Faucet Shank Kit, Black (Not illustrated, Includes items 15 thru 19)
28 29166.0000 - Faucet Repair Kit, Brown (Includes items 8, 10, 11 & 12)
29166.0001 - Faucet Repair Kit, Black (Includes items 8, 10, 11 & 12)
29166.0002 - Faucet Repair Kit, Black (Sweet / Unsweetend) (Includes items 8, 10, 11 & 12)
ICED TEA SERVER REPLACEMENT PARTS
10291 061303
BUNN-O-MATIC COMMERCIAL PRODUCT WARRANTY
Bunn-O-Matic Corp. (“BUNN”) warrants equipment manufactured by it as follows:
1) All equipment other than as specified below: 2 years parts and 1 year labor.
2) Electronic circuit and/or control boards: parts and labor for 3 years.
3) Compressors on refrigeration equipment: 5 years parts and 1 year labor.
4) Grinding burrs on coffee grinding equipment to grind coffee to meet original factory screen sieve analysis: parts and labor
for 3 years or 30,000 pounds of coffee, whichever comes first.
These warranty periods run from the date of installation BUNN warrants that the equipment manufactured by it will be
commercially free of defects in material and workmanship existing at the time of manufacture and appearing within the
applicable warranty period. This warranty does not apply to any equipment, component or part that was not manufactured
by BUNN or that, in BUNN’s judgment, has been affected by misuse, neglect, alteration, improper installation or operation,
improper maintenance or repair, damage or casualty. This warranty is conditioned on the Buyer 1) giving BUNN prompt
notice of any claim to be made under this warranty by telephone at [phone] or by writing to Post Office Box 3227,
Springfield, Illinois 62708-3227; 2) if requested by BUNN, shipping the defective equipment prepaid to an authorized BUNN
service location; and 3) receiving prior authorization from BUNN that the defective equipment is under warranty.
THE FOREGOING WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER WARRANTY, WRITTEN OR ORAL, EXPRESS
OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF EITHER MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE. The agents, dealers or employees of BUNN are not authorized to make modifications to
this warranty or to make additional warranties that are binding on BUNN. Accordingly, statements by such individuals,
whether oral or written, do not constitute warranties and should not be relied upon.
If BUNN determines in its sole discretion that the equipment does not conform to the warranty, BUNN, at its exclusive option
while the equipment is under warranty, shall either 1) provide at no charge replacement parts and/or labor (during the
applicable parts and labor warranty periods specified above) to repair the defective components, provided that this repair
is done by a BUNN Authorized Service Representative; or 2) shall replace the equipment or refund the purchase price for
the equipment.
THE BUYER’S REMEDY AGAINST BUNN FOR THE BREACH OF ANY OBLIGATION ARISING OUT OF THE SALE OF THIS
EQUIPMENT, WHETHER DERIVED FROM WARRANTY OR OTHERWISE, SHALL BE LIMITED, AT BUNN’S SOLE OPTION
AS SPECIFIED HEREIN, TO REPAIR, REPLACEMENT OR REFUND.
In no event shall BUNN be liable for any other damage or loss, including, but not limited to, lost profits, lost sales, loss of
use of equipment, claims of Buyer’s customers, cost of capital, cost of down time, cost of substitute equipment, facilities
or services, or any other special, incidental or consequential damages.