Burco REDIRACKS PR Series Installation guide

PR-2018-2.19 (18” Mast Height) 20-Lite Capacity and overall dimensions of
45”(L) x 32”(W) x 35”(H)
ASSEMBLY & INSTRUCTION MANUAL
Technical Assembly Required.
Save these instructions for future use.
The Burco® PR-Series includes the following models:
BURCOINC.COM
Page 1 of 5
©2019 Burco, Inc.

BURCOINC.COM
RACK ASSEMBLY
RAIL HARDWARE
CASTER HARDWARE
CASTER ASSEMBLY
X1 X2
X2
X16
X12
X28
X24
X16 X12
X12
X2
Bolt 3/8x1-1/4
Bolt 3/8x1-1/4
Washer 5/16 Flat
Washer 5/16 Flat
Washer 3/8 Lock Nut 3/8
Nut 3/8 Nyloc
BURCOINC.COM
Page 2 of 5
©2019 Burco, Inc.

RACK ASSEMBLY
THREADED
(NO NUT)
ONE PLACE
THREADED
(NO NUT)
ONE PLACE
THREE
PLACES
ONE PLACE
THREE PLACES
ONE PLACE
THREE
PLACES
THREE
PLACES
BURCOINC.COM
STEP 1: Ax one swiveling and one xed caster onto the longest side of the base assembly using (16) Bolts
3/8x 1-1/4 , (16) lock washers 3/8, (28) at washers 5/16, and (12) nut 3/8. Repeat with other side of base.
Page 3 of 5
©2019 Burco, Inc.

RACK ASSEMBLY
STEP 2:
THREE PLACES
THREE PLACES
THREE PLACES
THREE PLACES
BURCOINC.COM
2
24
12
Page 4 of 5
©2019 Burco, Inc.

REPLACEMENT PARTS
You can also view replacement parts for your PR-2018-2.19
at www.burcoinc.com!
PART NUMBER:
RTC-08
RCT-16
RBR-PR-2018-2.19
CST-PR
DESCRIPTION:
Top Cap
PVC Tubing 18”
Bottom Rubber
Caster Kit
FITS MODEL:
PR-2018-2.19
PR-2018-2.19
PR-2018-2.19
PR-2018-2.19
BURCOINC.COM
FINAL ASSEMBLY
Page 5 of 5
©2019 Burco, Inc.