Burlington Riviera 1000 User manual

Riviera 1000 shower plate and handles Chrome RIV2 CHR
Riviera 1000 shower plate and handles Gold RIV2 GOLD
Riviera 1500 shower plate and handles Chrome RIV3 CHR
Riviera 1500 shower plate and handles Gold RIV3 GOLD

Riviera 1000 shower plate and handles Chrome RIV2 CHR
Riviera 1000 shower plate and handles Gold RIV2 GOLD
Riviera 1500 shower plate and handles Chrome RIV3 CHR
Riviera 1500 shower plate and handles Gold RIV3 GOLD
We recommend that this product is installed by a qualified professional contractor.
Such as a plumber who is certified by NVQ (National Vocational Qualification) or
SNVQ (Scottish National Vocational Qualification) Level 3.
Please check this product immediately to ensure that it has not been damaged and
is complete. Before installation, please make sure this product is the correct model
and you have all the parts required for installation and using.
Please read these instructions carefully and keep it for future reference.
IMPORTANT
106
2-∅45
2-M45×1
104
RIV3 CHR/GOLD RIV2 CHR/GOLD
M45×1
M24×1
215
75
63
120
4-R20
75
80
104
127
2-∅45
Installation of RIV3 CHR/GOLD trim sets (needs to be used with HOX.005V)
Figure 1
HOX.005V parts included RIV3 CHR/GOLD parts included
215
75
63
120
4-R20
75
80
C
HANDLE
BASE
HOT
COLD
RETAINING
SLEEVE
HANDLE
FIXING
BACK PLATE
HANDLE
SCREW
HANDLE
SCREW
B
RETAINING
SLEEVE
HANDLE
FIXING
BACK PLATE
HANDLE
SCREW
HANDLE
SCREW
in the box)
(supplied
TEMPERATURE
HANDLE FIXING
HANDLE
BASE
D
A

For RIV3 trim sets, please follow below steps to install:
1. Remove part A and part B from the valve. Part A & B, with the two plastic rings included
in the valves are NOT need for this installation.
Attention: Please do NOT rotate the cartridge when removing part A.
2. Parts should be assembled in sequence illustrated by Figure 1.
1) Screw the retaining sleeve onto the valve body.
2) Slide the back plate onto the retaining sleeve, slightly press the back plate evenly so
that the double-sided tape on the back attach to the wall.
3) Install the handle fixing and temperature handle fixing. For the TEMPERATURE
HANDLE FIXING, ensure the position D is aligned with position C as indicated in the
diagram.Then fix the 2 handle fixings by the screws supplied.
3. Assemble the 2 handles (lever handle on the top and cross handle on the bottom).
For valve body installation,please refer to instructions included with HOX.005V.
IMPORTANT:
Riviera 1000 shower plate and handles Chrome RIV2 CHR
Riviera 1000 shower plate and handles Gold RIV2 GOLD
Riviera 1500 shower plate and handles Chrome RIV3 CHR
Riviera 1500 shower plate and handles Gold RIV3 GOLD
Installation of RIV2 CHR/GOLD trim sets (needs to be used with HOX.006V)
HOX.006V parts included RIV2 CHR/GOLD parts included
RETAINING
SLEEVE
HANDLE
FIXING
BACK PLATE
HANDLE
SCREW
HANDLE
SCREW
HANDLE
BASE
Figure 2
RETAINING
SLEEVE
HANDLE
FIXING
BACK PLATE
HANDLE
SCREW
HANDLE
SCREW
in the box)
(supplied
TEMPERATURE
HANDLE FIXING
HANDLE
BASE
A
B
C
HOT
COLD
D

For valve body installation,please refer to instructions included with HOX.006V.
IMPORTANT:
We do NOT recommend you use any household cleaners to clean the product because
these cleaners change substance or formula too frequently. The product should be
always cleaned only with soapy water and rinsed with clean water and dried with a soft
colth.
For RIV2 trim sets, please follow below steps to install:
1. Remove part A and part B from the valve. Part A & B, with the two plastic rings included
in the valves are NOT need for this installation.
Attention: Please do NOT rotate the cartridge when removing part A.
2. Parts should be assembled in sequence illustrated by Figure 2.
1) Screw the retaining sleeve onto the valve body.
2) Slide the back plate onto the retaining sleeve, slightly press the back plate evenly so
that the double-sided tape on the back attach to the wall.
3) Install the handle fixing and temperature handle fixing. For the TEMPERATURE
HANDLE FIXING, ensure the position D is aligned with position C as indicated in the
diagram.Then fix the 2 handle fixings by the screws supplied.
3. Assemble the 2 handles (lever handle on the top and cross handle on the bottom).
Riviera 1000 shower plate and handles Chrome RIV2 CHR
Riviera 1000 shower plate and handles Gold RIV2 GOLD
Riviera 1500 shower plate and handles Chrome RIV3 CHR
Riviera 1500 shower plate and handles Gold RIV3 GOLD