Bush BECFB142L User manual

技术要求
1.颜色要求：封面：黑白印刷
内页：黑白印刷；
批量时要求统一，不能有明显色差，
2.版面内容：封二印内容,
6-10页大写字高需大于3mm
图案与文字应印刷清晰、
规范，不能有印刷缺陷;
3.页面印刷：双面印刷；
4.成型方式：骑马钉；
5.成品尺寸：A5(140X210)
尺寸公差按GB/T 1804-c；
6.批量生产前须送样确认。
B
C
D
E
F
B
C
D
1234
1234
借（通）用件登记
出图审查
日 期
标志 处数 更改文件号 签 名 日 期
设计
制图
审核
工艺
陈家怡
会签
标准化
批准
日期
重 量 比 例
广东奥马冰箱有限公司
视角符号
重 要 度 [B]
202--
共 1 张 第 1 张
A A
封面：80g双胶
内页：80g双胶
说明书
CKBSH-G03$
梁嘉莉
刘金利
李梅方

BECFB142L

You'll soon be enjoying your newchest freezer.
It all begins here,with your instructions.Don't worry,
there's nothing too technical coming up.Just simple,
step-by-step guidance to get you up and running
quickly.Sound good?Then let's get sta rted
Help and Guidance
We're here to help you get the most from your chest freezer.Should you require
any guidance,a simple solution can often be found online at.
Www.bush-support.co.uk
If you still require further assistance,call one of our experts on 0345 257 7271.
Issue-1 02/04/2021
2 Help and Guidance

Contents 3
Contents
1
2
3
4
5
Safety information
Safety information 6
Getting to know
yourchest freezer
Ready? Let'sbegin... 13
14
Installing your
chest freezer
Using your
chest freezer
Parts
Transportation 17
Installation 17
Electrical Connection 18
Light bulb replacement 25
Before first use 21
Using your appliance 21
Useful information 21
Care and Maintenance
General 25
Power failure 25
Moving your appliance 25
TechnicalSpecifications 26
6Product support
TroubleShooting 29
Help and 30
Guarantee 31
assistance

Safety information 1

Safety information
Important-Please read these instructions fully
before installing or operating
6 Safetyinformation
Before use

Safety information 7
Safety information
Important-Please read these instructions fully
before installing or operating

8 Safetyinformation
Safety information
Important-Please read these instructions fully
before installing or operating

Safety information 9
Safety information
Important-Please read these instructions fully
before installing or operating

10 Safetyinformation
Safety information
Important-Please read these instructions fully
before installing or operating
similar
and with yellow or orange
color.
z
The refrigerating
appliance is not
intended to be used as
a built-inappliance,
unless specifically
shown as such into its
instruction manual.
z
The drawers, baskets
and shelves should be
kept in their current
position unless
otherwise specified in
th

is document.

Getting to know
your chest freezer 2

Getting to know your chest freezer
You'll be up and running in no time
Ready?Let's begin...
Please read these instructions carefully. They contain
important information which will help you get the best
from yourchest freezer and ensure safe and
correct installation and operation
If you require any further assistance, ourtechnical
experts arehappy to help. For full details, refer to
the product support section at the end of these
instructions.
Getting to knowyour chest freezer 13

14 Getting toknow your chestfreezer
Getting to know your chest freezer
You'll be up and running in no time
1.Door
2.Wheels
3.Drain port
Accessories included
Instructions x 1
Parts
3
4
1
2
5
4.Basket
5.LED light
6.Control panel
6
ON/OFF

Installing your chest freezer 3

Installing your chest freezer 17
Installing your chest freezer
Bringing it all together
Transportation
Caution: 2 people arerequired tounpack
and handle theappliance, it is
recommended that gloves are worn.
.The appliance shouldbe transported only in an
upright position. Do not tilt the appliance greater
than 45 degrees . The packaging as supplied must
be intact during transportation.
.After transportingthe appliance, leave it forat
least 4 hours before switching on to allow the
cooling system to settle. Failure to comply could
result in damage to the appliance.
.Do not movethe appliance bypulling the door or
handle as it may damage your flooring and wall
coverings etc.
.Ensure the supplycable is notcaught under the
appliance during and after moving.
.Carefully removeall packaging materials
including the foam base, dispose of correctly
Installation
.Ensure sufficientspacing is providedfor the
appliance to beinstalled. Leavespace on both
sides (10cm), back(10cm) and abovethe
appliance (70cm) toensure proper ventilation.
.Do not placethe appliance neara heat sourceor
in direct sunlight.
.Adjust the feet at front to levelthe appliance. It
should be installedon a smoothsurface to avoid
excessive vibration and noise.
.Each appliance hasa climate class(shown on the
rating plate)where it indicates the temperature
range of theappliance operation inplace. The
appliance may notwork properly ifit is leftfor a
long period ata temperatureoutside the specified
range：
extended temperate: ‘this refrigerating appliance is
intended to be used at ambient temperatures
ranging from 10 °C to 32 °C (from 50°F to 90°F )’;
temperate: ‘this refrigerating appliance is intended
to be used at ambient temperatures ranging from
16 °C to 32 °C(from 61°F to 90°F )’;
subtropical: ‘this refrigerating appliance is intended
to be used at ambient temperatures ranging from
16 °C to 38 °C (from 61°F to 100°F )’;
tropical: ‘this refrigerating appliance is intended to
be used at ambient temperatures ranging from
16 °C to 43 °C(from 61°F to 110°F )’
“ ”.Refer to section Care and Maintenance
to prepare your appliance for use.
.Do not putany heavy objects on topof the
appliance. It willdamage the appliance.
.Do not installthe appliance in a moist andwet place.

18 Installing your chest freezer
Installing your chest freezer
Bringing it all together
Electrical connection
Any electrical workthat is requiredto
install this applianceMUST be carried
out by aqualified electrician.
Warning: THIS APPLIANCEMUST BE
EARTHED
Before making any electrical connections,
ensure that:
.Electrical safetyis only guaranteed when the
earth systemof your houseis in accordance
with the relatedlocal regulations.
.Do not damagethe chest freezer circuit.
.Do not bend,stretch or pull the supply cable to
avoid electric shock.
.Do not useelectrical appliances insidethe food
storage compartmentsof the appliance,unless
they are ofthe type recommendedby the
manufacturer.
.Ensure the powersocket is suitable for the
maximum power ofthe machine (fusesin the
power circuit must be 13amp).
.The supply voltage should bethe same asthat
indicated in thetechnical specificationsand the
appliance ratingplate.
.The appliance shouldbe earthed andin
compliance with theapplicable law.
.When installed, thepower socketmust be within
easy reach.
.If the socket outlets inyour home arenot suitable
for the plugsupplied with thisunit check witha
qualified electrician forreplacement.
.The use ofadapters, multiple connectors or
extension cablesare not recommended.
.The appliance mustbe connected toa 220-240
volt 50Hz ACsupply by meansof a threepin
socket, suitablyearthed and protected by a13
amp fuse.
.Should the fuseneed to bereplaced, a 13amp
fuse approved to BS1362 mustbe used.
.The plug containsa removable fuse cover that
must be refitted when thefuse is replaced.If the
fuse cover islost or damaged,the plug mustnot
be used untila replacement cover has beenfitted
or the plugis replaced.
.A damaged plugshould be cutoff as closeto the
plug body aspossible, the fuseshould be removed
and the plugdisposed of safely.
Plug replacement (UK& Ireland only)
Should you needto replace theplug; the wires
in the powercable are coloured in the
following way:
Blue Neutral 'N'
Brown Live 'L'
Green & Yellow Earth 'E'
As the coloursof the wiresin the powercable
may not correspond with thecoloured
markings identifying theterminals in your
plug, and proceedas follows:
The green &yellow wire must be connectedto
the terminal inthe plug thatis marked withthe
letter E orby the earthsymbol.
The blue wiremust be connected to the
terminal that ismarked with theletter N.
The brown wire must beconnected to the
terminal that ismarked with theletter L.
If the powersupply cord isdamaged, it must
be replaced bythe manufacturer orits service
agent or asimilar qualified personin order to
avoid a hazard.