Bush B60185FFW User manual

B60185FFW
B60185FFB
B60185FFS

You'll soon be enjoying your newrefrigerator.
It all begins here,with your instructions.Don't worry,
there's nothing too technical coming up.Just simple,
step-by-step guidance to get you up and running
quickly.Sound good?Then let's get sta rted
Help and Guidance
We're hereto help you getthe most from yourrefrigerator.Should you require
any guidance,asimple solution can often be found online at.
www.
If you assistance,call oneof our experts on 0345 257 7271.
bush-support.com
still requirefurther
2 Help andGuidance

Contents 3
Contents
1
2
3
4
5
Safety information
Safety information 6
Getting to know
your refrigerator
Ready?Let'sbegin... 11
1 2
Installing your
refrigerator
Using your
refrigerator
Parts
Transportation 15
Installation 15
Door Reverse 16
Electrical Connection 17
Before first use 20
Using your appliance 20
Useful information 20
Care and Maintenance
General 24
Light bulb replacement 24
Power failure 24
Moving your appliance 24
TechnicalSpecifications 2 5
6Product support
TroubleShooting 28
Help and 29
Guarantee 30
assistance

Safety information 1

Safety information
Important-Please read these instructions fully
before installing or operating
6 Safetyinformation
Before use

Safety information 7
Safety information
Important-Please read these instructions fully
before installing or operating

8 Safetyinformation
Safety information
Important-Please read these instructions fully
before installing or operating

Getting to know
your refrigerator 2

Getting to know your refrigerator
You'll be up and running in no time
Ready?Let's begin...
Please read these instructions carefully.They contain
important information which will help you get the best
from yourrefrigerator and ensure safe and
correct installation and operation
If you require any further assistance,our technical
experts arehappy to help.For full details,refer to
the product support section at the end of these
instructions.
Getting to knowyour refrigerator 11

12 Getting toknow your refrigerator
Getting to know your refrigerator
You'll be up and running in no time
1.Thermostatand light
2. Fan
3.Fridge shelves
4.Upper Crisper
8
Spacers x 2
Accessories included
Instructions x 1
Parts
1
3
4
5
6
7
5.Crisper
6.Freezer Drawers
7.Leveling Feet
8.Fridge Balconies
2

Installing your refrigerator 3

Installing your refrigerator 15
Installing your refrigerator
Bringing it all together
Transportation
Caution: 2 people arerequired to unpack
and handle theappliance, it is
recommended that gloves are worn.
.The appliance shouldbe transported only in an
upright position. Do not tilt the appliance greater
than 45 degrees . The packaging as supplied must
be intact during transportation.
.After transportingthe appliance, leave it forat
least 4 hours before switching on to allow the
cooling system to settle. Failure to comply could
result in damage to the appliance.
.Do not movethe appliance by pulling the door or
handle as it may damage your flooring and wall
coverings etc.
.Empty any water in thedrain traybefore moving.
.Make surethat the defrost waterpipe at the
back of theproduct is fixed to theplastic
evaporating panon the topof the compressor,
to avoiddefrost waterspillage on theon the floor.
.Ensure the supplycable is notcaught under the
appliance during and after moving.
.Carefully removeall packaging materials
including the foam base, dispose of correctly
Installation
.Ensure sufficientspacing is providedfor the
appliance to beinstalled. Leavespace on both
sides (15cm), back(20cm) and abovethe
appliance (30cm) toensure proper ventilation.
.Screw in thetwo spacers at the backof the
appliance.
.Do not placethe appliance neara heat sourceor
in direct sunlight.
.Do not putany heavy objects on topof the
appliance. It willdamage the appliance.
.Do not installthe appliance ina moist andwet place.
.Adjust the feet at front to levelthe appliance. It
should be installedon a smoothsurface to avoid
excessive vibration and noise.
.Each appliance hasa climate class(shown on the
rating plate)where it indicates the temperature
range of theappliance operation inplace. The
appliance may notwork properly ifit is leftfor a
long period ata temperatureoutside the specified
range.
Climate Class
SN
N
ST
T
16~38 C
16~43 C
10~32 C
16~32 C
Amb.T.( C) Amb.T.( F)
50~90 F
51~90 F
61~100 F
61~110 F

16 Installing your refrigerator
Installing your refrigerator
Bringing it all together
Door Reverse
Warning: Remove the mainplug before
reversing thedoor. 2 people maybe
required toreverse thedoor.The refrigerator
has the capabilityof opening thedoor from
either the leftor the rightside. The unitis
delivered toyou with thedoor opening from
the left side.To change the openingdirection,
please follow theseinstructions.
Note: Before reversing the doorswing, unplug
the appliance fromthe mains ordisconnect the
electrical power supply.
1.
2.
3.
scratching.
4.Move thehinge hole covers from left side to
right side.
5.Unscrew bottom hinge. Thenremove the
adjustable feetfrom both sides.
6.Unscrew andremove the bottom hinge pin,
turn the bracket over andreplace it.
7.Refit thebracket fittingthe bottom hinge
pin.Replace both adjustable feet.Transfer
the lowerdoor onto the lowerhinge pin.
8.Makethe middle hingereverse the
direction 180 C,then transfer it to the left
property position. Make themiddle hinge
pin in theupper hole ofthe lower door,
then tight thebolts.
9.Place the upperdoor back on.Ensure the
door is alignedhorizontally andvertically so
that the sealareclosed on allsides before
finally tightening thetop hinge. Theninsert
the hinge andscrew it tothe front ofthe
unit.
10.
11.
12.
13.
Unscrew and remove the hingecover.
Unscrew and remove the hinge.
Unscrew middle hinge.Then lift lowerdoor
and place iton a softpad to avoid
Unscrew the hingepin and reverse the
hinge, then reinstall the hingepin.
Prise the hingehole cover.
Fix the hingeon the left.
Fix the hingecover on theleft and the
hinge hole coveron the right.
Levelling the appliance
1.Rotate feetclockwise to heighten.
2.Rotate feet anti clockwise to lower.
(1) (2) (3)
(4) (5)
(6)
(7) (8) (9)
(10) (11) (12)
(13)

Installing your refrigerator 17
Installing your refrigerator
Bringing it all together
Electrical connection
Any electrical workthat is requiredto
install this applianceMUST be carriedout
by a qualifiedelectrician.
Warning: THIS APPLIANCEMUST BE
EARTHED
Before making any electrical connections,
ensure that:
.Electrical safetyis only guaranteed when theearth
system ofyour house isin accordance withthe
related localregulations.
.Do not damagethe refrigerantcircuit.
.Do not bend,stretch orpull the supply cable to
avoid electric shock.
.Do not useelectrical appliances insidethe food
storage compartmentsof the appliance,unless
they are ofthe type recommendedby the
manufacturer.
.Ensure the powersocket issuitable for the
maximum power ofthe machine (fusesin the
power circuit must be 13amp).
.The supply voltage should bethe same asthat
indicated in thetechnical specificationsand the
appliance ratingplate.
.The appliance shouldbe earthed andin
compliance with theapplicable law.
.When installed, thepower socketmust be within
easy reach.
.If the socket outlets inyour home arenot suitable
for the plugsupplied with thisunit check witha
qualified electrician forreplacement.
.The use ofadapters, multipleconnectors or
extension cablesare not recommended.
.The appliance mustbe connected toa 220-240
volt 50Hz ACsupply by meansof a threepin
socket, suitablyearthed and protected by a13
amp fuse.
.Should the fuseneed to bereplaced, a 13amp
fuse approved to BS1362 mustbe used.
.The plug containsa removablefuse cover that
must be refitted when thefuse is replaced.If the
fuse cover islost or damaged,the plug mustnot
be used untila replacement cover has beenfitted
or the plugis replaced.
.A damaged plugshould be cut off as closeto the
plug body aspossible, the fuseshould be removed
and the plugdisposed of safely.
Plug replacement (UK& Ireland only)
Should you needto replace theplug; the wires
in the powercable are coloured in the
following way:
Blue Neutral 'N'
Brown Live 'L'
Green & Yellow Earth 'E'
As the coloursof the wiresin the powercable
may not correspond with thecoloured
markings identifying theterminals in your
plug, and proceedas follows:
The green &yellow wire must be connectedto
the terminal inthe plug thatis marked withthe
letter E orby the earth symbol.
The blue wiremust be connected to the
terminal that ismarked with theletter N.
The brown wire must beconnected to the
terminal that ismarked with theletter L.
If the powersupply cord isdamaged, it mustbe
replaced by themanufacturer or its service
agent or asimilar qualified personin order
to avoida hazard.

Using your refrigerator 4