BZB Gear BG-18HBT-B100 User manual

BG-18HBT-B100
HDMI 18Gbps Over HDBaseT™2.0
with ARC

2
Thank you for purchasing this product
For optimum performance and safety, please read these instructions carefully
before connecting, operating or adjusting this product. Please keep this
manual for future reference.
Surge protection device recommended
This product contains sensitive electrical components that may be damaged
by electrical spikes, surges, electric shock, lightning strikes, etc. Use of surge
protection systems is highly recommended in order to protect and extend the
life of your equipment.
Table of Contents
1. Introduction ...........................................................................3
2. Features .................................................................................3
3. Package Contents ................................................................3
4. Specifications ........................................................................4
5. Operation Controls and Functions .......................................5
6. Connection Diagram ............................................................8
7. Mission Statement………………………………………………...9
8. Warranty Information………………………………………….....9

3
1. Introduction
The BG-18HBT-B100 HDBaseT extender enables transmission of video
resolutions up to 4K2K@60Hz(YUV 4:4:4), along with HD audio, dedicated
optical audio pathways, 100BaseT Ethernet, Two-Way IR, RS-232, 24V
power over 5e/6/7 and ARC signals up to 330ft/100m. ARC (Audio Return Channel) function enables audio from a compatible display to be routed back
from the receiver unit to the transmitter. Using the latest HDBaseT 2.0
technology can make your home or office set-up more efficient and easy to
use.
2. Features
HDMI 2.0b, HDCP 2.2 and HDCP 1.4 compliant
Video resolutions up to 4K2K@60Hz(4:4:4), 4K2K@30Hz, 1080p@120Hz
Audio up to 7.1 channels of High Definition audio pass through (LPCM,
Dolby TrueHD, and DTS-HD Master Audio)
HDBaseT 2.0 over a single CAT5e/6/7 cable up to 330ft/100m distance
5-Play™ convergence: HD video & audio, IR/RS-232/Ethernet/power over
5e/6/7
Two-Way power over 5e/6/7 supports either TX or RX powered by
24V@1A, the other one doesn’t need power supply
ARC and CEC supported
3. Package Contents
1 x HDMI Extender Transmitter
1 x HDMI Extender Receiver
2 x Wideband IR TX
2 x Wideband IR RX
1 x 24V1A DC Power Supply
4 x Mounting ears
1 x User Manual

4
4. Specifications
Technical
HDMI Compliance
HDMI 2.0b
HDCP Compliance
HDCP 2.2 and HDCP 1.4
Video Bandwidth
18 Gbps
Video Resolutions
up to 4K2K@50/60Hz(4:4:4),4K2K@30Hz,1080P@120Hz, and
1080P 3D@60Hz
Color Space
RGB, YCbCr 4:4:4, YCbCr 4:2:2
Color Depth
8-bit,10-bit, 12-bit
HDMI Audio Formats
(Pass-through)
LPCM 2/5.1/7.1CH, Dolby Digital, DTS 5.1, Dolby Digital+, Dolby
TrueHD, DTS-HD Master Audio, Dolby Atmos, DTS:X
ESD Protection
Human body model —±8kV (air-gap discharge) & ±4kV (contact
discharge)
Connections
Transmitter
Inputs
1x HDMI Type A [19-pin female]
1x IR In [3.5mm Stereo Mini-jack]
1x LAN [RJ45]
Outputs
1x HDBaseT Out [RJ45]
1x IR Out [3.5mm Stereo Mini-jack]
1x Optical Out [S/PDIF]
Receiver
Inputs
1x HDBaseT In [RJ45]
1x IR In [3.5mm Stereo Mini-jack]
1x Optical In [S/PDIF]
Outputs
1 x HDMI Type A [19-pin female]
1x IR Out [3.5mm Stereo Mini-jack]
1 x LAN [RJ45]
Mechanical
Housing
Metal Enclosure
Color
Black
Dimensions
172mm [W] x 97.5mm [D] x 20mm [H]
Weight
Tx:420g, Rx:425g
Power Supply
Input: AC100 - 240V 50/60Hz
Output: DC 24V/1A (US/EU standards, CE/FCC/UL certified)
Power Consumption
11W (Max)
Operation
Temperature
32 - 104°F / 0 - 40°C
Storage temperature
-4 - 140°F / -20 - 60°C
Relative Humidity
20 - 90% RH (no condensation)

5
5. Operation Controls and Functions
5.1 Transmitter Front and Rear Panel
1. POWER LED: System power indicator.
2. ARC LED: ARC status indicator.
3. ARC Button: Press the button will enable or disable the ARC function.
Enable ARC: LED ON
Disable ARC: LED OFF
ARC function: If you need use ARC, your HDTV must support this
function, when you open the ARC function, the transmitter optical out
port will output the HDTV current display content audio signal,
otherwise the transmitter optical out port signal comes from Receiver’s
Optical In.
4. DC 24V: Connects 24V/1A adaptor to AC wall outlet for power supply.
5. HDBaseT OUT: Connects to HDBaseT Receiver with a Cat5e/6/7
cable.
6. IR IN: Connects to a Wideband IR RX cable.
7. IR OUT: Connects to a Wideband IR TX cable.
8. OPTICAL OUT: Connects to speaker with coaxial input for audio signal
output from Receiver’s Optical In or ARC.
9. HDMI IN: Connects to HDMI source device.
10. LAN: Connects to an active network for LAN sharing of a total
transmission rate up to 100Mbps. Or when a compatible LAN equipped
Transmitter is connected to an active network, this allows the network

6
access (including internet access if available) to be shared between the
Transmitter and Receiver.
Note: Does not connect this RJ45 port to any of the HDBaseT port.
Such behavior may damage this port or whole device.
11. RS-232: Connects to any devices with RS-232 port for RS-232
commands transmission.
12. SERVICE SEL 1/2: Reserved for manufacturer use only.
5.2 Receiver Front and Rear Panel
1. POWER LED: System power indicator.
2. ARC LED: ARC status indicator.
3. ARC Button: Press the button will enable or disable the ARC function.
Enable ARC: LED ON
Disable ARC: LED OFF
4. DC 24V: Connects 24V/1A adaptor to AC wall outlet for power supply.
5. HDBaseT IN: Connects to HDBaseT Transmitter with a Cat5e/6/7 cable.
6. IR IN: Connects to a Wideband IR RX cable.
7. IR OUT: Connects to a Wideband IR TX cable.
8. OPTICAL IN: Connects to audio source device such as DVD or Blu-ray
player for sending audio signal to Transmitter.
9. HDMI OUT: Connects to a HDMI display device.

7
10. LAN: Connects to an active network for LAN sharing of a total
transmission rate up to 100Mbps. Or when a compatible LAN equipped
Transmitter is connected to an active network, this allows the network
access (including internet access if available) to be shared between the
Transmitter and Receiver.
Note: Does not connect this RJ45 port to any of the HDBaseT port.
Such behavior may damage this port or whole device.
11. RS-232: Connects to any devices with RS-232 port for RS-232
commands transmission.
12. SERVICE SEL 1/2: Reserved for manufacturer use only.

8
6. Connection Diagram

9
7. Mission Statement
BZB Gear manifests from the competitive nature of the audiovisual industry to
innovate while keeping the customer in mind. AV solutions can cost a pretty
penny, and new technology only adds to it. We believe everyone deserves to
see, hear, and feel the advancements made in today’s AV world without
having to break the bank. BZB Gear is the solution for small to medium-sized
applications requiring the latest professional products in AV.
We live in a DIY era where resources are abundant on the internet. With that in
mind, our team offers system design consultation and expert tech support
seven days a week for the products in our BZB Gear catalog. You’ll notice
comparably lower prices with BZB Gear solutions, but the quality of the
products is on par with the top brands in the industry. The unparalleled support
from our team is our way of showing we care for every one of our customers.
Whether you’re an integrator, home theater enthusiast, or a do-it-yourselfer,
BZB Gear offers the solutions to allow you to focus on your project and not
your budget.
8. Warranty Information
BZB Gear | Second Year Assurance
BZB Gear wants to assure you peace of mind. We're so confident in the quality
of our products that along with the manufacturer's one-year limited warranty,
we are offering free second-year warranty coverage upon registration*!
Taking advantage of this program is simple, just follow the steps below:
1. Register your product within 90 days of purchase by visiting
BZBGear.com/warranty.

10
2. Complete the registration form. Provide all necessary proof of purchase
details, including serial number and a copy of your sales receipt.
For questions, please call 1.888.660.2962 or email [email protected].
For complete warranty information, please visit BZBGear.com/warranty or
scan the QR code below.
*Terms and conditions apply. Registration is required.