BZB Gear BG-UHD-SC1X2 User manual

BG-UHD-SC1X2
4K/18G 1x2 HDMI Splitter Scaler w/ Audio
User Manual

BZBGEAR BG-UHD-SC1X2 PRODUCT MANUAL
Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: [phone] ·Email: [e-mail] 2

BZBGEAR BG-UHD-SC1X2 PRODUCT MANUAL
TABLE OF CONTENTS
Statement 4
Safety Precaution 4
Introduction 5
Features 5
Packing List 5
Specifications 6
Panel Descriptions 6
Application Example 7
Tech Support 8
Warranty 8
Mission Statement 8
Copyright 8
Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: [phone] ·Email: [e-mail] 3

BZBGEAR BG-UHD-SC1X2 PRODUCT MANUAL
Statement
Please read these instructions carefully before connecting, operating, or configuring this
product. Please save this manual for future reference.
Safety Precaution
●To prevent damaging this product, avoid heavy pressure, strong vibration, or immersion
during transportation, storage, and installation.
●The housing of this product is made of organic materials. Do not expose to any liquid,
gas, or solids which may corrode the shell.
●Do not expose the product to rain or moisture.
●To prevent the risk of electric shock, do not open the case. Installation and maintenance
should only be carried out by qualified technicians.
●Do not use the product beyond the specified temperature, humidity, or power supply
specifications.
●This product does not contain parts that can be maintained or repaired by users.
Damage caused by dismantling the product without authorization from BZBGEAR is not
covered under the warranty policy.
●Installation and use of this product must strictly comply with local electrical safety
standards.
●This product contains sensitive electrical components that may be damaged by
electrical spikes, surges, electric shock, lighting strikes, etc. Use of surge protection
systems is highly recommended in order to protect and extend the life of your
equipment.
Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: [phone] ·Email: [e-mail] 4

BZBGEAR BG-UHD-SC1X2 PRODUCT MANUAL
Introduction
The BG-UHD-SC1X2 is a 4K/18G HDMI splitter with in-built scaler, designed for
installations in which a single 4K video source needs to be distributed to multiple displays
that support different maximum video resolutions. The BG-UHD-SC1X2 supports
down-scaling of 4K video to a fixed resolution of 1080p or to a lower color gamut if the
screen does not support 4K (4:4:4). It also includes audio embedding and de-embedding,
advanced EDID management and supports HDCP 2.2 compliant.
The BG-UHD-SC1X2 allows those displays only capable of supporting lower video
resolutions to receive scaled 4K (up to 60Hz 4:4:4) content while still showing the maximum
original 4K UHD resolution on the higher-definition display.
Features
●1x HDMI input to 2x HDMI outputs
●Supports resolution up to 4K@60Hz 4:4:4, HDR and full 3D formats
●HDMI output 1 down-scales the video to the following formats:
1080P@24/25/30/60Hz (for screens that do not support 4K)
4K@50/60Hz 4:2:0 (for screens that do not support full 4K@60Hz 4:4:4)
●HDMI output 2 supports 4K video bypass
●Audio de-embedding and embedding
●Advanced EDID management
●HDCP 2.2 compliant
●Slim design
Packing List
• 1 x BG-UHD-SC1X2 HDMI Splitter Scaler
• 1 x 5V/1A Power Supply
• 1 x Pair of Rack-mount Ears
Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: [phone] ·Email: [e-mail] 5

BZBGEAR BG-UHD-SC1X2 PRODUCT MANUAL
Specifications
Bandwidth
18Gbps
Video Input Connectors
1x HDMI Type A, 19-pin, female
Audio Input Connectors
1x 3.5mm stereo jack (L/R)
Video Output Connectors
1x HDMI Type A, 19-pin, female
Audio Output Connectors
1x 3.5mm stereo jack (L/R)
EDID
4-PIN DIP Switcher
Mode
4-PIN DIP Switcher
Dimensions(W x D x H)
101mm x 103mm x 22mm, without feet
Shipping Weight
0.7KG
Operating Temperature
32°F to 104°F (0°C to 40°C)
Storage Temperature
-4°F to 140°F (-20°C to 60°C)
Power Supply
5V/1A DC
Panel Descriptions
No.
Name
Function Description
1
DC power input
Screw-on locking connector, use the included 5V 1A DC adaptor to power the unit.
2
LED indicator for Power
Lit blue when unit is powered
3
L/R In
3.5mm stereo jack, to embed the audio on to HDMI output
4
HDMI input
Connect to a HDMI source device
5
HDMI input LED indicator
Lit when there is an active HDMI connection to a source device
6
Upgrade
Micro USB port for firmware upgrade
7
Mode DIP Switch
4 pin (UP=0, DOWN=1)
[1xx0]: Always convert 4K format to 1080p
[0xx0]: Auto convert 4K format to 1080p when detect the sink does not support 4K
[x1x0]: HDCP follow source
[x0x0]: HDCP follow sink
[xx10]: Audio insert
[xx00]: Audio bypass
[xxx1]: Mode control by RS232 command (by upgrade port connect)
[xxX0]: Mode control by DIP switch
Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: [phone] ·Email: [e-mail] 6

BZBGEAR BG-UHD-SC1X2 PRODUCT MANUAL
8
DIP switcher*
EDID management
9
HDMI output 1
Scaled video output, connect to HDMI sink device
10
HDMI output 1 LED indicator
Lit when detecting an active HDMI connection to a sink device
11
HDMI output 2
Bypass video output, connect to HDMI sink device
12
HDMI output 2 LED indicator
Lit when detecting an active HDMI connection to a sink device
13
L/R Out
3.5mm stereo jack, extract the audio from the HDMI input, PCM 2ch audio only
14
Coaxial out
Extract the audio from HDMI input
3
2
1
0
EDID Type*
Combination of DIP positions
0
0
0
0
HDMI 1080p@60Hz, Audio 2CH PCM
0
0
0
1
HDMI 1080p@60Hz, Audio 5.1CH DTS/DOLBY
0
0
1
0
HDMI 1080p@60Hz, Audio 7.1CH DTS/DOLBY/HD
0
0
1
1
HDMI 1080i@60Hz, Audio 2CH PCM
0
1
0
0
HDMI 1080i@60Hz, Audio 5.1CH DTS/DOLBY
0
1
0
1
HDMI 1080i@60Hz, Audio 7.1CH DTS/DOLBY/HD
0
1
1
0
HDMI 4K@60Hz 4:2:0, Audio 2CH PCM
0
1
1
1
HDMI 4K@60Hz 4:2:0, Audio 5.1CH DTS/DOLBY
1
0
0
0
HDMI 4K@60Hz 4:2:0, Audio 7.1CH DTS/DOLBY/HD
1
0
0
1
HDMI 4K@60Hz 4:4:4, Audio 2CH PCM
1
0
1
0
HDMI 4K@60Hz 4:4:4, Audio 5.1CH DTS/DOLBY
1
0
1
1
HDMI 4K@60Hz 4:4:4, Audio 7.1CH DTS/DOLBY/HD
1
1
0
0
DVI 1280x1024@60Hz, Audio None
1
1
0
1
DVI 1920x1080@60Hz, Audio None
1
1
1
0
DVI 1920x1200@60Hz, Audio None
1
1
1
1
Copy Output 1 EDID
Application Example
Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: [phone] ·Email: [e-mail] 7

BZBGEAR BG-UHD-SC1X2 PRODUCT MANUAL
Tech Support
Have technical questions? We may have answered them already!
Please visit BZBGEAR’s support page (bzbgear.com/support) for helpful information and tips
regarding our products. Here you will find our Knowledge Base (bzbgear.com/knowledge-base)
with detailed tutorials, quick start guides, and step-by-step troubleshooting instructions. Or
explore our YouTube channel, BZB TV (youtube.com/c/BZBTVchannel), for help setting up,
configuring, and other helpful how-to videos about our gear.
Need more in-depth support? Connect with one of our technical specialists directly:
Phone
1.888.499.9906
Email
[e-mail]
Live Chat
bzbgear.com
Warranty
BZBGEAR Pro AV products and cameras come with a three-year warranty. An extended two-year
warranty is available for our cameras upon registration for a total of five years.
For complete warranty information, please visit BZBGEAR.com/warranty.
For questions, please call 1.888.499.9906 or email [e-mail].
Mission Statement
BZBGEAR is a breakthrough manufacturer of high-quality, innovative audiovisual equipment
ranging from AVoIP, professional broadcasting, conferencing, home theater, to live streaming
solutions. We pride ourselves on unparalleled customer support and services. Our team offers
system design consultation, and highly reviewed technical support for all the products in our
catalog. BZBGEAR delivers quality products designed with users in mind.
Copyright
All the contents in this manual and its copyright are owned by BZBGEAR. No one is allowed to
imitate, copy, or translate this manual without BZBGEAR’s permission. This manual contains no
guarantee, standpoint expression or other implies in any form. Product specification and
information in this manual is for reference only and subject to change without notice.
All rights reserved. No reproducing is allowed without acknowledgement.
Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: [phone] ·Email: [e-mail] 8