C-Data EPON HGU User manual

Company Address: Room 601, Floor 6, Building F, Songbai Road 1008, Sunshine Community，Xili Street, Nanshan District, Shenzhen(518108)
Factory Address: Fl1, Bldg B, Wentao Industrial zone, Yingrenshiyongxin Village, Shiyan Street, Baoan district, Shenzhen, Guangdong, China (518055)
Tel: [phone] Fax:[phone]
Website: www.cdatatec.com
C-DATA R_EPON HGU Products
4FE+WIFI+CATV/4FE+WIFI/1GE+WIFI/1GE
+WIFI+CATV/4GE+WIFI+CATV/4GE+WIFI
User Manual
Version：V1.1

Company Address: Room 601, Floor 6, Building F, Songbai Road 1008, Sunshine Community，Xili Street, Nanshan District, Shenzhen(518108)
Factory Address: Fl1, Bldg B, Wentao Industrial zone, Yingrenshiyongxin Village, Shiyan Street, Baoan district, Shenzhen, Guangdong, China (518055)
Tel: [phone] Fax:[phone]
Website: www.cdatatec.com
Content
1 Note............................................................................................................................................. 1
1.1 Installation Precautions...................................................................................................1
1.2 Precautions for Use......................................................................................................... 1
2 Brief.............................................................................................................................................3
2.1 Product Features..............................................................................................................3
2.2 Product Specifications.................................................................................................... 4
2.3 Device Interface Definition............................................................................................ 4
2.4 LED Description............................................................................................................. 5
2.5 Device Connection..........................................................................................................5
2.6 Applications.................................................................................................................... 6
3 Login Web Management Locally............................................................................................... 6
3.1 Physical Connection of ONU and PC.............................................................................6
3.2 PC Access the WEB of ONU..........................................................................................7
4 ONU Register Information Config............................................................................................. 8
4.1 View ONU Register Status............................................................................................. 8
4.2 View ONU Optical Power Information.......................................................................... 8
4.3 LOID Authentication Config.......................................................................................... 9
5 Basic Configuration for Internet................................................................................................. 9
5.1 Route Mode Configuration............................................................................................. 9
5.2 Configure Bridge WAN Connection for Internet......................................................... 16
5.3 View the WAN Connection Status................................................................................17
5.4 Delete the WAN Connection.........................................................................................17
6 ONU LAN Configuration......................................................................................................... 18
6.1 LAN IP Address Configuration.................................................................................... 18
6.2 View LAN Client.......................................................................................................... 19
7 Multicast/IPTV Configuration..................................................................................................20
7.1 Multicast/IPTV Service Setting.................................................................................... 20
7.2 IGMP Snooping Setting................................................................................................20
7.3 IGMP Proxy.................................................................................................................. 20
7.4 IGMP VLAN Configuration......................................................................................... 21
8 WLAN Configuration............................................................................................................... 21
8.1 WLAN Basic Configuration......................................................................................... 21
8.2 WLAN Password Configuration...................................................................................22
8.3 WLAN Virtual SSID.....................................................................................................23
9 CATV Configuration.................................................................................................................23
9.1 Configure CATV Port Parameter..................................................................................23
9.2 View CATV Information...............................................................................................24
10 TR069 Remote Management.................................................................................................... 24
10.1 Configure Channel for TR069 Remote Management.................................................. 24
10.2 TR069 Client Configuration......................................................................................... 25
11 Device Management................................................................................................................. 25
11.1 ONU Remote Access Configuration.............................................................................25

Company Address: Room 601, Floor 6, Building F, Songbai Road 1008, Sunshine Community，Xili Street, Nanshan District, Shenzhen(518108)
Factory Address: Fl1, Bldg B, Wentao Industrial zone, Yingrenshiyongxin Village, Shiyan Street, Baoan district, Shenzhen, Guangdong, China (518055)
Tel: [phone] Fax:[phone]
Website: www.cdatatec.com
11.2 Restore Default Setting.................................................................................................26
11.3 Firmware Upgrade........................................................................................................ 26
11.4 Device Reboot...............................................................................................................27
Concluding Remarks.........................................................................................................................27

Company Address: Room 601, Floor 6, Building F, Songbai Road 1008, Sunshine Community，Xili Street, Nanshan District, Shenzhen(518108)
Factory Address: Fl1, Bldg B, Wentao Industrial zone, Yingrenshiyongxin Village, Shiyan Street, Baoan district, Shenzhen, Guangdong, China (518055)
Tel: [phone] Fax:[phone]
Website: www.cdatatec.com
1
1 Note
1.1 Installation Precautions
Do not place the equipment near flammable or conductive items, high temperatures (such
as direct sunlight) or in wet conditions, or on a PC chassis, and check that the surrounding
appliances are stable.
Check the cable for aging. Check and verify that the AC or DC input voltage is within the
permissible range of the device and that the polarity of the DC is correct.
Unless the manufacturer permit, use the type of power indicated on the label and the
adapter supplied with the product.
To prevent damage to the product from lightning, make sure that the ground of the power
outlet and the power adapter is securely grounded. In the thunderstorm, be sure to unplug
the power and all the connections.
Equipment input voltage fluctuation should be less than 10%, the power plug, refrigerators,
hair dryer and iron should not use the same socket.
To avoid electric shock or fire due to overload of the power outlet, damage to the cord or
damage to the plug, check the power cord regularly. If damage is found, replace it
immediately.
Please place the device on a flat surface and can not place items on the device.
Equipment is easy to produce heat when working, should maintain the appropriate cooling
space to avoid damage caused by overheating products. The elongated hole on the shell is
designed for heat dissipation. Keep the ventilation clean and avoid falling from the heat
sink into the equipment. Otherwise, the equipment may be damaged or fire. Do not spill
liquid onto the surface of the equipment.
1.2 Precautions for Use
Please read the user manual carefully before using the equipment and follow all the
precautions on the user manual and the product.
Avoid eye looked at the optical interface directly, so as to avoid the laser beam emitted by
the interface damage the eyes. Please try to wear safety glasses to effectively protect your
eyes from damage. It is best to plug in the fiber optic interface jacket when the optical
interface is not in use .
Turn off the power when the device is not in use
Before plugging the power supply, make sure that the power switch is turned off to avoid
surge. Be careful when unplugging the power supply and the transformer temperature may
be high.

Company Address: Room 601, Floor 6, Building F, Songbai Road 1008, Sunshine Community，Xili Street, Nanshan District, Shenzhen(518108)
Factory Address: Fl1, Bldg B, Wentao Industrial zone, Yingrenshiyongxin Village, Shiyan Street, Baoan district, Shenzhen, Guangdong, China (518055)
Tel: [phone] Fax:[phone]
Website: www.cdatatec.com
2
To ensure safety, do not open the enclosure of the device, especially when the device is
powered up.
Unplug the power supply before cleaning the equipment. Use a soft dry cloth to clean the
equipment to avoid the use of liquids or sprays.
Do not connect this product to any electronic product unless it is instructed by our
customer engineer or your broadband supplier, as any incorrect connection may cause
power or fire hazard.

Company Address: Room 601, Floor 6, Building F, Songbai Road 1008, Sunshine Community，Xili Street, Nanshan District, Shenzhen(518108)
Factory Address: Fl1, Bldg B, Wentao Industrial zone, Yingrenshiyongxin Village, Shiyan Street, Baoan district, Shenzhen, Guangdong, China (518055)
Tel: [phone] Fax:[phone]
Website: www.cdatatec.com
3
2 Brief
Realtek EPON HGU (HomeGateway ONU) series products are for telecommunications,
radio and television operators FTTH fiber household type multiple access requirements and design
a series of fusion EPON terminal product, the product is based on mature and stable, cost-effective
gigabit EPON technology, is a blend of correlates and gigabit Ethernet switching technology, HFC
technology, WLAN technology and powerful routing forward technology.High bandwidth, high
reliable, easy to management and good quality of service (QoS) guarantees etc, equipment
technical performance meet IEEE802.3 ah, China telecom EPON equipment technical
requirements (V2.1 & V3.0) such as the requirement of the specification, with the mainstream
manufacturers bureau OLT (Huawei, ZTE, Fiberhome) together used have good compatibility.
EPON technology is a combination of PON technology and Ethernet technology advantages
of emerging technologies, is a kind of point to multi-point forming technology.High bandwidth,
high efficiency, large coverage, and the numerous advantages of abundant user interface, etc., is
the operator to realize broadband access network business, and the comprehensive transformation
of the ideal technology.
Realtek EPON HGU (HomeGateway ONU) series products can be integrated wireless
capabilities, fully in accordance with 802.11 n/b/g wireless standard protocols, built-in high gain
directional antenna, wireless transmission rate of up to 300 MBPS, has the characteristics of
strong penetrating power, wide coverage, to provide users with more efficient data transmission
security.
2.1 Product Features
Support double fiber access, offer a variety of broadband, VOIP, CATV business
ONU meet the IEEE802.3 ah, China telecom CTC 2.1 & CTC3.0 standards
Wi-Fi series meet 802.11 n/b/g technical standards,support 20Mhz/40Mhz
Support the PPPoE, DHCP, static IP broadband access
Support NAT, static routing, port forwarding
Support data encryption, VLAN passthrough and VLAN tag
Support has bandwidth speed limit function
Support port loop detection/port link-state detection function
Support through the OLT remote upgrade/WEB local upgrade function
Support broadcast storm inhibition function
Isolation between different data port
Support port flow control
Support based on OLT as SNMP agent - each manufacturer of a unified network
management, easy to install and maintain
Provide abundant fault alarm function, easy to fault diagnosis

Company Address: Room 601, Floor 6, Building F, Songbai Road 1008, Sunshine Community，Xili Street, Nanshan District, Shenzhen(518108)
Factory Address: Fl1, Bldg B, Wentao Industrial zone, Yingrenshiyongxin Village, Shiyan Street, Baoan district, Shenzhen, Guangdong, China (518055)
Tel: [phone] Fax:[phone]
Website: www.cdatatec.com
4
Support AES - 128, support for key generation and switch
Support technology based on the DBA and priority of dual management model, to
ensure that the user specified minimum bandwidth requirements
Support CATV business remotely shut off function
Operating wavelength: 1100 - 1600nm
Light reflection loss: >45dB
Input optical power: -18dBm～0dBm
2.2 Product Specifications
Ambient temperature: 0°C～50°C
Relative humidity：10% to 90% (non-condensing)
Power adapter input：12 V/1A
TX Optical Power：0~4dBm
RX Opitcal Power：-3~-27dBm
2.3 Device Interface Definition

Company Address: Room 601, Floor 6, Building F, Songbai Road 1008, Sunshine Community，Xili Street, Nanshan District, Shenzhen(518108)
Factory Address: Fl1, Bldg B, Wentao Industrial zone, Yingrenshiyongxin Village, Shiyan Street, Baoan district, Shenzhen, Guangdong, China (518055)
Tel: [phone] Fax:[phone]
Website: www.cdatatec.com
5
2.4 LED Description
Indicator
Description
1
PWR
Power status
On: The ONU is power on;
Off: The ONU is Power off;
2
CATV
CATV port status
On：CATV optical normal（>-9dBm）
Off：The CATV signals are not received
（<-9dBm）
3
WIFI
WIFI
Blinking：Data is being transmitted
On：Wi-Fi function Opens
4
LANn
LAN port status
On: Ethernet connection is normal;
Blinking: Data is being transmitted
through the Ethernet port;
Off: Ethernet connection is not set up;
5
LOS
GPON optical
signals
On: Optical power lower than receiver
sensitivity ;
Off: Optical in normal
6
PON
ONU Register
On: Success to register to OLT;
Blinking: In process of registering to
OLT;
Off: In process of registering to OLT;
2.5 Device Connection
Connect the fiber: Insert the SC fiber connector into the PON connector on the rear
panel of the ONU.
Connect the Ethernet cable: Connect the RJ-45 Ethernet cable to any LAN port and each
home device, that is, the computer, IPTV set-top box, and so on.
Connect coaxial cable: Connect the coaxial cable to the RF connector of the ONU.

Company Address: Room 601, Floor 6, Building F, Songbai Road 1008, Sunshine Community，Xili Street, Nanshan District, Shenzhen(518108)
Factory Address: Fl1, Bldg B, Wentao Industrial zone, Yingrenshiyongxin Village, Shiyan Street, Baoan district, Shenzhen, Guangdong, China (518055)
Tel: [phone] Fax:[phone]
Website: www.cdatatec.com
6
Connect the AC adapter: Plug the AC / DC adapter into the AC wall jack and the ONU
12V DC power jack.
2.6 Applications
3 Login Web Management Locally
3.1 Physical Connection of ONU and PC
a) Local NIC of PC connects to LAN port or ETH port of ONU via wires.
b) Set the IP address of PC’s local NIC as 192.168.101.X (X：2-254).
c) Open cmd windows and make sure that PC can ping the management IP (192.168.101.1)
of ONU.

Company Address: Room 601, Floor 6, Building F, Songbai Road 1008, Sunshine Community，Xili Street, Nanshan District, Shenzhen(518108)
Factory Address: Fl1, Bldg B, Wentao Industrial zone, Yingrenshiyongxin Village, Shiyan Street, Baoan district, Shenzhen, Guangdong, China (518055)
Tel: [phone] Fax:[phone]
Website: www.cdatatec.com
7
3.2 PC Access the WEB of ONU
Make sure you can ping the ONU like #3.1. Open the IE Web broswer (IE, Firefo
x, Google), copy and paste URL: http: //192.168.101.1, the following pop-up Prompt landi
n-g page:
Input UserName：adminisp PassWord：adminisp
Click “Login” button. The product basics page appears, as follows：

Company Address: Room 601, Floor 6, Building F, Songbai Road 1008, Sunshine Community，Xili Street, Nanshan District, Shenzhen(518108)
Factory Address: Fl1, Bldg B, Wentao Industrial zone, Yingrenshiyongxin Village, Shiyan Street, Baoan district, Shenzhen, Guangdong, China (518055)
Tel: [phone] Fax:[phone]
Website: www.cdatatec.com
8
You can start further configuration.
4 ONU Register Information Config
4.1 View ONU Register Status
1. Login ONU WEB, select Status -> Internet Info -> GPON Info, view the ONU
register status：
4.2 View ONU Optical Power Information
1. Login ONU WEB, select Status -> Internet Info -> GPON Info, view Rx power and Tx
power of ONU：

Company Address: Room 601, Floor 6, Building F, Songbai Road 1008, Sunshine Community，Xili Street, Nanshan District, Shenzhen(518108)
Factory Address: Fl1, Bldg B, Wentao Industrial zone, Yingrenshiyongxin Village, Shiyan Street, Baoan district, Shenzhen, Guangdong, China (518055)
Tel: [phone] Fax:[phone]
Website: www.cdatatec.com
9
4.3 LOID Authentication Config
LOID of ONU is mainly applicable of the authentication mode of LOID and LOID +
Password for ONU. By default,EPON ONU registers for the OLT by MAC and rarely uses LOID
for register. Normally, we needn’t to configure LOID. But the configuration as follows:
1. Login ONU WEB, select Internet -> Remote Mgmt -> LOID, view or configure LOID
and password of ONU：
5 Basic Configuration for Internet
Home Gateway Unit (HGU) ONU supports route function, so that there are route mode and
bridge mode for internet. The difference between route mode and bridge mode as follows :
Route mode：ONT as a home gateway equipment, ONT IP address can be obtained in three
ways, which includes DHCP,Static IP Address and PPPoE. The IP address of the device on the
user side is obtained through the DHCP address pool of the ONT, or by manually setting;
Bridge mode：The ONT does not obtain the IP address assigned by the upper device or can
not manually set the static IP address. It is used as a relay device and does not process the data.
There are three ways to obtain the IP address of the user side device, namely DHCP,PPPoE,
Static IP Address.
5.1 Route Mode Configuration
5.1.1 Configure PPPoE WAN Connection for Internet in Route Mode
1. Login ONU WEB, select Internet -> Internet Config -> Internet Config, and then there
are some parameters for us to configure as follows:
【WAN Connection name】Select ‘Add WAN Connection’
【Mode】Select ‘ Route ’
【Connection Mode 】Select ‘Ipv4’; If there is Ipv6 in the network, we can select
‘Ipv4/Ipv6’.

Company Address: Room 601, Floor 6, Building F, Songbai Road 1008, Sunshine Community，Xili Street, Nanshan District, Shenzhen(518108)
Factory Address: Fl1, Bldg B, Wentao Industrial zone, Yingrenshiyongxin Village, Shiyan Street, Baoan district, Shenzhen, Guangdong, China (518055)
Tel: [phone] Fax:[phone]
Website: www.cdatatec.com
10
【Internet way】Select ‘PPPoE’
【NAT】Check ‘NAT’ feature；NAT is mainly used for address translation function of local
network and external network. The default is checked enable status. If you do
not check this option, maybe you can’t surf the internet.
【Enable Vlan】We can set this option according to your network plan. If there is vlan in
the network for internet, we have to check ‘Enable VLAN’ option. If not,
we needn’t check this option, which will be VLAN transparent mode.
【Vlan ID】Configure this option according to our network plan.
【MTU】The default is 1492；we have to change to lower MTU, such as 1400, if we can
ping the DNS but not access the website via WEB broswer.
【User Name】Type PPPoE account, normally offered by ISP, for Internet；
【Password】Type PPPoE password, normally offered by ISP, for Internet；
【Service Mode】Select Internet；Normally, select ‘ Internet ’ in the route mode.
【LAN DHCP Disable】Don’t check this option；Normally, Terminal , connected to the
HGU ONU, will get an IP address from the ONU’s IP pool.
Therefore, we needn’t check this option to get the IP address.
【Bind port 】Bundel the physical ports (Lan port 1-4 and wireless) with PPPoE WAN
connection.
Note: By default, all LAN ports and WIFI data are not bound by this WAN connection (a
LAN and WIFI SSID can only be bound to a WAN conection at the same time).

Company Address: Room 601, Floor 6, Building F, Songbai Road 1008, Sunshine Community，Xili Street, Nanshan District, Shenzhen(518108)
Factory Address: Fl1, Bldg B, Wentao Industrial zone, Yingrenshiyongxin Village, Shiyan Street, Baoan district, Shenzhen, Guangdong, China (518055)
Tel: [phone] Fax:[phone]
Website: www.cdatatec.com
11
2. After configuring the parameters of PPPoE WAN connection as above, click ‘Apply’ to
finish the setting：
5.1.2 Configure DHCP WAN Connection for Internet in Route Mode
1．Login ONU WEB, select Internet -> Internet Config -> Internet Config, and then there
are some parameters for us to configure as follows:
【WAN Connection name】Select ‘Add WAN Connection’
【Mode】Select ‘ Route ’
【Connection Mode 】Select ‘Ipv4’; If there is Ipv6 in the network, we can select
‘ Ipv4/Ipv6 ’.
【Internet way】Select ‘DHCP’
【NAT】Check ‘ NAT ’ feature；NAT is mainly used for address translation function of
local network and external network. The default is checked enable status. If you

Company Address: Room 601, Floor 6, Building F, Songbai Road 1008, Sunshine Community，Xili Street, Nanshan District, Shenzhen(518108)
Factory Address: Fl1, Bldg B, Wentao Industrial zone, Yingrenshiyongxin Village, Shiyan Street, Baoan district, Shenzhen, Guangdong, China (518055)
Tel: [phone] Fax:[phone]
Website: www.cdatatec.com
12
do not check this option, maybe you can’t surf the internet.
【Enable Vlan】We can set this option according to your network plan. If there is vlan in
the network for internet, we have to check ‘ Enable VLAN ‘ option. If
not, we needn’t check this option, which will be VLAN transparent
mode.
【Vlan ID】Configure this option according to our network plan.
【MTU】The default is 1500; we have to change to lower MTU, such as 1400, if we can
ping the DNS but not access the website via WEB broswer.
【Request DNS 】Selected ‘enable’, the ONU will get DNS from upper DNS server
automatically; Selected ‘Disable’, we have to configure an static DNS
for the ONU by manual. We can configure one of them according to
network plan.
【Primary DNS / Secondary DNS】After disable ‘Request DNS’ function, we have to set a
static DNS in here.
【Service Mode】Select Internet；Normally, select ‘ Internet ’ in the route mode.
【LAN DHCP Disable】Don’t check this option；Normally, Terminal , connected to the
HGU ONU, will get an IP address from the ONU’s IP pool.
Therefore, we needn’t check this option to get the IP address.
【Bind port 】Bundel the physical ports (Lan port 1-4 and wireless) with DHCP WAN
connection.
Note: By default, all LAN ports and WIFI data are not bound by this WAN connection (a
LAN and WIFI SSID can only be bound to a WAN conection at the same time).

Company Address: Room 601, Floor 6, Building F, Songbai Road 1008, Sunshine Community，Xili Street, Nanshan District, Shenzhen(518108)
Factory Address: Fl1, Bldg B, Wentao Industrial zone, Yingrenshiyongxin Village, Shiyan Street, Baoan district, Shenzhen, Guangdong, China (518055)
Tel: [phone] Fax:[phone]
Website: www.cdatatec.com
13
2.After configuring the parameters of DHCP WAN connection as belows, click ‘Apply’
to finish the setting：

Company Address: Room 601, Floor 6, Building F, Songbai Road 1008, Sunshine Community，Xili Street, Nanshan District, Shenzhen(518108)
Factory Address: Fl1, Bldg B, Wentao Industrial zone, Yingrenshiyongxin Village, Shiyan Street, Baoan district, Shenzhen, Guangdong, China (518055)
Tel: [phone] Fax:[phone]
Website: www.cdatatec.com
14
5.1.3 Configure Static IP Address WAN Connection for Internet in Route Mode
1．Login ONU WEB, select Internet -> Internet Config -> Internet Config,and then
there are some parameters for us to configure as follows:
【WAN Connection name】Select ‘Add WAN Connection’
【Mode】Select ‘ Route ’
【Connection Mode 】Select ‘Ipv4’; If there is Ipv6 in the network, we can select
‘ Ipv4/Ipv6 ’.
【Internet way】Select ‘Static’
【NAT】Check ‘ NAT ’ feature；NAT is mainly used for address translation function of
local network and external network. The default is checked enable status. If you
do not check this option, maybe you can’t surf the internet.
【Enable Vlan】We can set this option according to your network plan. If there is vlan in
the network for internet, we have to check ‘Enable VLAN’ option. If not,
we needn’t check this option, which will be VLAN transparent mode.
【Vlan ID】Configure this option according to our network plan.
【MTU】The default is 1500；we have to change to lower MTU, such as 1400, if we can
ping the DNS but not access the website via WEB broswer.
【IP Address】Set static IP address
【Subnet Mask】Set the mask of static IP address
【Default Gateway】Set the default gateway of static IP address
【Primary DNS / Secondary DNS】Set static primary DNS address and secondary DNS
address
【Service Mode】Select Internet；Normally, select ‘Internet’ in the route mode.
【LAN DHCP Disable】Don’t check this option；Normally, Terminal , connected to the
HGU ONU, will get an IP address from the ONU’s IP pool.
Therefore, we needn’t check this option to get the IP address.
【Bind port】Bundel the physical ports (Lan port 1-4 and wireless) with Static IP WAN
connection.
Note: By default, all LAN ports and WIFI data are not bound by this WAN connection (a
LAN and WIFI SSID can only be bound to a WAN conection at the same time).

Company Address: Room 601, Floor 6, Building F, Songbai Road 1008, Sunshine Community，Xili Street, Nanshan District, Shenzhen(518108)
Factory Address: Fl1, Bldg B, Wentao Industrial zone, Yingrenshiyongxin Village, Shiyan Street, Baoan district, Shenzhen, Guangdong, China (518055)
Tel: [phone] Fax:[phone]
Website: www.cdatatec.com
15
2. After configuring the parameters of Static IP WAN connection as belows, click ‘Apply’ to
finish the setting：

Company Address: Room 601, Floor 6, Building F, Songbai Road 1008, Sunshine Community，Xili Street, Nanshan District, Shenzhen(518108)
Factory Address: Fl1, Bldg B, Wentao Industrial zone, Yingrenshiyongxin Village, Shiyan Street, Baoan district, Shenzhen, Guangdong, China (518055)
Tel: [phone] Fax:[phone]
Website: www.cdatatec.com
16
5.2 Configure Bridge WAN Connection for Internet
1．Login ONU WEB, select Internet -> Internet Config -> Internet Config, and then there
are some parameter for us to configure as follows:
【WAN Connection name】Select ‘Add WAN Connection’
【Mode】Select ‘Bridge’
【Connection Mode 】Select ‘Ipv4’; If there is Ipv6 in the network, we can select
‘Ipv4/Ipv6’.
【NAT】Don’t check ‘NAT’ feature；NAT is mainly used for address translation function
of local network and external network. HGU ONU doesn’t deal with the packets
from the teminal, so we needn’t enable the NAT function.
【Enable Vlan】We can set this option according to your network plan. If there is vlan in
the network for Internet, we have to check ‘Enable VLAN’ option. If not,
we needn’t check this option, which will be VLAN transparent mode.
【Vlan ID】Configure this option according to our network plan.
【MTU】The default is 1500；we have to change to lower MTU, such as 1400, if we can
ping the DNS but not access the website via WEB broswer.
【Service Mode】Select ‘Other’ or ‘Internet’；Normally, select ‘Internet’ for Internet or
flow testing; Select ‘Other’ for IPTV service.
【LAN DHCP Disable】Check this option；Normally, Terminal , connected to the HGU
ONU, will get an IP address from the upper DHCP server.
Therefore, we need check this option to avoid the terminal get
an IP from the ONU.
【Bind port 】Bundel the physical ports (Lan port 1-4 and wireless) with Bridge WAN
connection.
Note: By default, all LAN ports and WIFI data are not bound by this WAN connection (a
LAN and WIFI SSID can only be bound to a WAN conection at the same time).

Company Address: Room 601, Floor 6, Building F, Songbai Road 1008, Sunshine Community，Xili Street, Nanshan District, Shenzhen(518108)
Factory Address: Fl1, Bldg B, Wentao Industrial zone, Yingrenshiyongxin Village, Shiyan Street, Baoan district, Shenzhen, Guangdong, China (518055)
Tel: [phone] Fax:[phone]
Website: www.cdatatec.com
17
2. After configuring the parameter of Bridge WAN connection as above, click ‘Apply’ to
finish the setting：
5.3 View the WAN Connection Status
1．Login ONU WEB, select Status -> Internet Info -> IPv4 Status. In here, we can view
WAN connection status, check the route WAN connection if it gets an IP address and Bridge WAN
connection if it is UP. As follows:
5.4 Delete the WAN Connection
1．Login ONU WEB, select Internet -> Internet Config -> Internet Config. Select a WAN
connection from ‘WAN Connection name’ and click ‘Delete’ button at the bottom of the page. As
follows: