C-Data Z EPON HGU User manual

Company Address: Floor 6, Building F, Songbai Road 1008, Sunshine Community，Xili Street, Nanshan District, Shenzhen(518108)
Factory Address: Bldg B, Wentao Industrial zone, Yingrenshiyongxin Village, Shiyan Street, Baoan district, Shenzhen, Guangdong, China (518055)
Tel: [phone] Fax:[phone]
Website: www.cdatatec.com
C-DATA Z_EPON HGU Product
4GE+WIFI(Dual-Band)
4GE+CATV+WIFI(Dual-Band)
User Manual
Version：V1.1

Company Address: Floor 6, Building F, Songbai Road 1008, Sunshine Community，Xili Street, Nanshan District, Shenzhen(518108)
Factory Address: Bldg B, Wentao Industrial zone, Yingrenshiyongxin Village, Shiyan Street, Baoan district, Shenzhen, Guangdong, China (518055)
Tel: [phone] Fax:[phone]
Website: www.cdatatec.com
Contents
1 Note.................................................................................................................................................1
1.1 Installation Precaution...........................................................................................................1
1.2 Precaution For Use................................................................................................................1
2 Brief.................................................................................................................................................2
2.1 Product Features....................................................................................................................3
2.2 Product Specifications...........................................................................................................3
2.3 Device Interface Definition...................................................................................................4
2.4 LED Description................................................................................................................... 4
2.5 Device Connection................................................................................................................ 5
2.6 Applications...........................................................................................................................5
3 Login Web Management Locally............................................................................................ 5
3.1 Physical Connection of ONU and PC...................................................................................5
3.2 PC Access the WEB of ONU................................................................................................6
4 ONU Register Information Config.......................................................................................... 7
4.1 Check the ONU Register Status............................................................................................8
4.2 View ONU Optical Power Information................................................................................ 8
5 Basic Internet Configuration....................................................................................................8
5.1 Route Mode Configuration................................................................................................... 9
5.1.1 Configure PPPoE WAN Connection for Internet in Route Mode............................. 9
5.1.2 Configure DHCP WAN Connection for Internet in Route Mode............................11
5.1.3 Configure Static IP Address WAN Connection for Internet in Route Mode...........13
5.2 Configure Bridge WAN Connection for Internet............................................................... 15
5.4 View the WAN Connection Status..................................................................................... 17
5.5 Delete the WAN Connection.............................................................................................. 18
6 ONU LAN Configuration..........................................................................................................18
6.1 DHCP Settings.................................................................................................................... 18
6.2 View LAN Client................................................................................................................ 19
7 Multicast/IPTV Configuration.................................................................................................20
7.1 Multicast/IPTV Service Setting.......................................................................................... 20
7.2 IGMP Snooping Setting...................................................................................................... 20
7.3 IGMP Proxy........................................................................................................................ 21
7.4 IGMP VLAN Configuration............................................................................................... 22
8 WLAN Configuration.................................................................................................................. 22
8.1 WLAN Basic Configuration............................................................................................... 22
8.2 WLAN Password Configuration.........................................................................................24
8.3 WLAN Virtual SSID........................................................................................................... 24
9 CATV Configuration....................................................................................................................25
9.1 Configure CATV Port Parameter........................................................................................ 25
9.2 View CATV Information.....................................................................................................26
10 TR069 Remote Management.....................................................................................................27
10.1 Configure Channel for TR069 Remote Management.......................................................27
10.2 TR069 Client Configuration............................................................................................. 27

Company Address: Floor 6, Building F, Songbai Road 1008, Sunshine Community，Xili Street, Nanshan District, Shenzhen(518108)
Factory Address: Bldg B, Wentao Industrial zone, Yingrenshiyongxin Village, Shiyan Street, Baoan district, Shenzhen, Guangdong, China (518055)
Tel: [phone] Fax:[phone]
Website: www.cdatatec.com
11 Device Management................................................................................................................28
11.1 ONU Device Remote Access Settings.............................................................................. 28
11.2 Restore Default Setting..................................................................................................... 29
11.3 Firmware Upgrade............................................................................................................ 29
11.4 Device Reboot...................................................................................................................30
Concluding Remarks.......................................................................................................................31

Company Address: Floor 6, Building F, Songbai Road 1008, Sunshine Community，Xili Street, Nanshan District, Shenzhen(518108)
Factory Address: Bldg B, Wentao Industrial zone, Yingrenshiyongxin Village, Shiyan Street, Baoan district, Shenzhen, Guangdong, China (518055)
Tel: [phone] Fax:[phone]
Website: www.cdatatec.com
P1
1 Note
1.1 Installation Precaution
Do not place the equipment near flammable or conductive items, high temperatures (such
as direct sunlight) or in wet conditions, or on a PC chassis, and check that the surrounding
appliances are stable.
Check the cable for aging. Check and verify that the AC or DC input voltage is within the
permissible range of the device and that the polarity of the DC is correct.
Unless the manufacturer permit, use the type of power indicated on the label and the
adapter supplied with the product.
To prevent damage to the product from lightning, make sure that the ground of the power
outlet and the power adapter is securely grounded. In the thunderstorm, be sure to unplug
the power and all the connections.
Equipment input voltage fluctuation should be less than 10%, the power plug, refrigerators,
hair dryer and iron should not use the same socket.
To avoid electric shock or fire due to overload of the power outlet, damage to the cord or
damage to the plug, check the power cord regularly. If damage is found, replace it
immediately.
Please place the device on a flat surface and can not place items on the device.
Equipment is easy to produce heat when working, should maintain the appropriate cooling
space to avoid damage caused by overheating products. The elongated hole on the shell is
designed for heat dissipation. Keep the ventilation clean and avoid falling from the heat
sink into the equipment. Otherwise, the equipment may be damaged or fire. Do not spill
liquid onto the surface of the equipment.
1.2 Precaution For Use
Please read the user manual carefully before using the equipment and follow all the
precautions on the user manual and the product.

Company Address: Floor 6, Building F, Songbai Road 1008, Sunshine Community，Xili Street, Nanshan District, Shenzhen(518108)
Factory Address: Bldg B, Wentao Industrial zone, Yingrenshiyongxin Village, Shiyan Street, Baoan district, Shenzhen, Guangdong, China (518055)
Tel: [phone] Fax:[phone]
Website: www.cdatatec.com
P2
Avoid eye looked at the optical interface directly, so as to avoid the laser beam emitted by
the interface damage the eyes. Please try to wear safety glasses to effectively protect your
eyes from damage. It is best to plug in the fiber optic interface jacket when the optical
interface is not in use .
Turn off the power when the device is not in use
Before plugging the power supply, make sure that the power switch is turned off to avoid
surge. Be careful when unplugging the power supply and the transformer temperature may
be high.
To ensure safety, do not open the shell of the device, especially when the device is powered
up.
Unplug the power supply before cleaning the equipment. Use a soft dry cloth to clean the
equipment to avoid the use of liquids or sprays.
Do not connect this product to any electronic product unless it is instructed by our
customer engineer or your broadband supplier, as any incorrect connection may cause
power or fire hazard.
2 Brief
ZTE scheme EPON HGU gateway (family) series products are for telecommunications, radio
and television operators FTTH fiber household type multiple access requirements and design a
series of fusion EPON terminal product, the product is based on mature stable, cost-effective
gigabit EPON technology, is a blend of correlates and gigabit Ethernet switching technology,
WLAN and powerful forward routing technology. High bandwidth, high reliable, easy to
management and good quality of service (QoS) guarantees etc, equipment technical performance
meet the IEEE802.3ah equipment technical requirements specification, such as used with
mainstream manufacturers OLT have good compatibility.
EPON technology is a combination of PON technology and Ethernet technology advantages
of emerging technologies, is a kind of point to multi-point forming technology. High bandwidth,
high efficiency, large coverage, and the numerous advantages of abundant user interface, etc., is
the operator to realize broadband access network business, and the comprehensive transformation
of the ideal technology.
ZTE EPON ONU series integrate wireless function which meets 802.11 a/b/g/n/ac technical

Company Address: Floor 6, Building F, Songbai Road 1008, Sunshine Community，Xili Street, Nanshan District, Shenzhen(518108)
Factory Address: Bldg B, Wentao Industrial zone, Yingrenshiyongxin Village, Shiyan Street, Baoan district, Shenzhen, Guangdong, China (518055)
Tel: [phone] Fax:[phone]
Website: www.cdatatec.com
P3
standards and support 2.4G and 5G, and the wireless transmission rate up to 1.2Gbps. It has the
characteristics of strong penetrating power and wide coverage. It can provide users with more
efficient data transmission security.
Note: This manual is written in the form of 4GE+CATV+ WIFI(Dual-Band) ONU, and
other models ONU can also be referenced.
2.1 Product Features
Support single fiber access, offer a variety of broadband, CATV business
ONU meet the IEEE802.3 ah, China telecom CTC 2.1 & CTC3.0 standards
Provide 4 10/100/1000M auto-adaptive Ethernet ports
Wi-Fi series meet 802.11 a/b/g/n/ac technical standards,support dual-band WiFi，Channel
bandwith support 20MHz, 40MHz and 80Mhz
Support PPPoE, DHCP, static IP broadband service connection.
Support NAT, static routing, port forwarding.
Support VLAN transparent transmission, vlan tag and untag functions
Support up and down bandwidth limit function
Support port loop-detection and port link-state detection
Support upgrade through the OLT remote / local ONU WEB
Support broadcast storm suppression
Different data ports are isolated from each other
Support IGMP Snooping、IGMP proxy
Support Ethernet line performance statistics
Support OLT as SNMP-agent way of the unified management of the network
management, easy to install and maintain
Provide a variety of fault alarm function, easy to fault diagnosis
Support DBA technology and priority based on the dual management model to ensure
that the user's minimum specified bandwidth requirements
2.2 Product Specifications
Ambient temperature: 0°C～40°C
Relative humidity：10% to 90% (non-condensing)
Power adapter input：12 V/1A
TX Optical Power：0~4dBm
RX Opitcal Power：-27~-3dBm

Company Address: Floor 6, Building F, Songbai Road 1008, Sunshine Community，Xili Street, Nanshan District, Shenzhen(518108)
Factory Address: Bldg B, Wentao Industrial zone, Yingrenshiyongxin Village, Shiyan Street, Baoan district, Shenzhen, Guangdong, China (518055)
Tel: [phone] Fax:[phone]
Website: www.cdatatec.com
P4
2.3 Device Interface Definition
2.4 LED Description
Indicator
Description
1
WIFI
WIFI
Blinking：Data is being transmitted
On：Wi-Fi function Opens
Off：Wi-Fi function Close
2
LAN1-4
LAN Port status
On: Ethernet connection is normal;
Blinking: Data is being transmitted
through the Ethernet port;
Off: Ethernet connection is not set up;
3
LOS
EPON optical signals
On: Optical power lower than receiver
sensitivity ;
Off: Optical in normal
4
PON
ONU Register
On: Success to register to OLT
Blinking: In process of registering to
OLT;
Off: In process of registering to OLT;
5
CATV
CATV status
On：CATV optical normal
Off：The CATV signals are not received
6
PWR
Power status
On: The ONU is power on;
Off: The ONU is Power off;

Company Address: Floor 6, Building F, Songbai Road 1008, Sunshine Community，Xili Street, Nanshan District, Shenzhen(518108)
Factory Address: Bldg B, Wentao Industrial zone, Yingrenshiyongxin Village, Shiyan Street, Baoan district, Shenzhen, Guangdong, China (518055)
Tel: [phone] Fax:[phone]
Website: www.cdatatec.com
P5
2.5 Device Connection
Connect the fiber: Insert the SC fiber connector into the PON connector on the rear
panel of the ONU.
Connect the Ethernet cable: Connect the RJ-45 Ethernet cable to any LAN port and each
home device, that is, the computer, IPTV set-top box, and so on.
Connect coaxial cable: Connect the coaxial cable to the RF connector of the ONU.
Connect the AC adapter: Plug the AC / DC adapter into the AC wall jack and the ONU
12V DC power jack.
2.6 Applications
3 Login Web Management Locally
3.1 Physical Connection of ONU and PC
a) Local NIC of PC connects to LAN port of ONU via wires.
b) Set the IP address of PC’s local NIC as 192.168.101.X (X：2-254).

Company Address: Floor 6, Building F, Songbai Road 1008, Sunshine Community，Xili Street, Nanshan District, Shenzhen(518108)
Factory Address: Bldg B, Wentao Industrial zone, Yingrenshiyongxin Village, Shiyan Street, Baoan district, Shenzhen, Guangdong, China (518055)
Tel: [phone] Fax:[phone]
Website: www.cdatatec.com
P6
c) Open the cmd windows and make sure that PC can ping the management IP
(192.168.101.1) of ONU.
3.2 PC Access the WEB of ONU
Make sure you can ping the ONU like #3.1.Open the IE Web broswer (IE, Firefox, Google),
copy and paste URL: http: //192.168.101.1 the following pop-up Prompt landin-g page:

Company Address: Floor 6, Building F, Songbai Road 1008, Sunshine Community，Xili Street, Nanshan District, Shenzhen(518108)
Factory Address: Bldg B, Wentao Industrial zone, Yingrenshiyongxin Village, Shiyan Street, Baoan district, Shenzhen, Guangdong, China (518055)
Tel: [phone] Fax:[phone]
Website: www.cdatatec.com
P7
Input UserName：adminisp PassWord：adminisp
Click “Login” button. The product basics page appears, as follows：
After entering the main interface of the ONU, the ONU can be further set. For specific
setting information, see the following setting instructions.
4 ONU Register Information Config

Company Address: Floor 6, Building F, Songbai Road 1008, Sunshine Community，Xili Street, Nanshan District, Shenzhen(518108)
Factory Address: Bldg B, Wentao Industrial zone, Yingrenshiyongxin Village, Shiyan Street, Baoan district, Shenzhen, Guangdong, China (518055)
Tel: [phone] Fax:[phone]
Website: www.cdatatec.com
P8
4.1 Check the ONU Register Status
1. Login ONU’s WEB, select Status -> Network Information -> Link information,
view the ONU register status：
4.2 View ONU Optical Power Information
1. Login ONU’s WEB, select Status -> Network Information -> Link Information,view
Input power and Output power of ONU：
5 Basic Internet Configuration
Home Gateway Unit (HGU) ONU supports route function, so that there are route
mode and bridge mode for internet. The difference between route mode and bridge mode
are as follows :

Company Address: Floor 6, Building F, Songbai Road 1008, Sunshine Community，Xili Street, Nanshan District, Shenzhen(518108)
Factory Address: Bldg B, Wentao Industrial zone, Yingrenshiyongxin Village, Shiyan Street, Baoan district, Shenzhen, Guangdong, China (518055)
Tel: [phone] Fax:[phone]
Website: www.cdatatec.com
P9
Route mode：ONT as a home gateway equipment, ONT IP address can be obtained
in three ways, which includes DHCP, Static IP Address and PPPoE. The IP address of the
device on the user side is obtained through the DHCP address pool of the ONT, or by
manually setting;
Bridge mode: broadband Internet access HGU itself does not obtain the IP address of
the upper equipment distribution, also can not set the static IP address manually, the HGU
is used as relay equipment, and does not process the data.The IP address of the user
side device (PC) at the LAN port of HGU obtains through the OLT upper server, and the
PC accesses the Internet via DHCP, PPPoE and static IP address respectively.
5.1 Route Mode Configuration
5.1.1 Configure PPPoE WAN Connection for Internet in Route Mode
1. Login ONU’s WEB, select Network->WAN->WAN Connection, and then there
are some parameters for us to configure as follows:
【IP Version】Select ‘Ipv4’; If there is Ipv6 in the network, we can select ‘Ipv4/Ipv6’.
【Type】Select“PPPoE”.
【Connection Name】Select “Create WAN Connection”.
【Port Binding 】Band the physical ports (LAN1-4 Port ) with PPPOE WAN
connection. Besides, if user want to use wifi function, must bind
any SSID with DHCP WAN connection, and turn on wireless wifi
function. When user configures wifi function, could refer to
WLAN configuration this chapter.
【Enable DHCP Server 】check this option;Normally, Terminal , connected to the
HGU ONU, will get an IP address from the ONU’s IP pool.
Therefore, we need to check this option to get the IP address.
【Enable NAT】Check ‘NAT’ feature；NAT is mainly used for address translation
function of local network and external network. The default is
checked enable status. If you do not check this option, maybe you
can’t surf the internet.

Company Address: Floor 6, Building F, Songbai Road 1008, Sunshine Community，Xili Street, Nanshan District, Shenzhen(518108)
Factory Address: Bldg B, Wentao Industrial zone, Yingrenshiyongxin Village, Shiyan Street, Baoan district, Shenzhen, Guangdong, China (518055)
Tel: [phone] Fax:[phone]
Website: www.cdatatec.com
P10
【Service List】Check “INTERNET”or“VOICE_INTERNET”;The broadband Internet
of routing mode is usually check the “INTERNET”,the latter
supports voice functions.
【VLAN Type】Configure this option according to our network plan.If the network
plans the vlan of broadband Internet, this item needs to choose
"tag";If the network has no vlan planning for broadband Internet
access, this option is "untag”.
【Vlan ID】This will appear after the selection "tag", and the vlan id of the network
plan should be filled in.
【MTU】The default is 1492; if we can ping the DNS but not access to the website
via WEB browser，we need to lower the value of MTU, such as 1400.
【Username】Type PPPoE account, normally offered by ISP, for Internet;
【Password】Type PPPoE password, normally offered by ISP, for Internet;
【Authentication Type】The default is “Auto”.
【Dial Mode】The default is “Always On”.
【Idle Timeout】The default is “1200”seconds.
Note: the default port is unbound, and all the LAN ports go through this WAN.
When the device has a bridge WAN and a route WAN at the same time,it needs to
bind the port for each WAN (a LAN can only be bound to a WAN, can not bind to
multiple WAN connections at the same time.
2. After configuration of PPPOE WAN,click the “Create”button to finish the setting.

Company Address: Floor 6, Building F, Songbai Road 1008, Sunshine Community，Xili Street, Nanshan District, Shenzhen(518108)
Factory Address: Bldg B, Wentao Industrial zone, Yingrenshiyongxin Village, Shiyan Street, Baoan district, Shenzhen, Guangdong, China (518055)
Tel: [phone] Fax:[phone]
Website: www.cdatatec.com
P11
5.1.2 Configure DHCP WAN Connection for Internet in Route Mode
1.Login ONU’s WEB, select Network->WAN->WAN Connection, and then there are
some parameters for us to configure as follows:
【IP Version】Select ‘Ipv4’; If there is Ipv6 in the network, we can select ‘Ipv4/Ipv6’.
【Type】Select“DHCP”.
【Connection Name】Select “Create WAN Connection”.
【Port Binding 】Band the physical ports (LAN1-4 Port ) with DHCP WAN
connection. Besides, if user want to use wifi function, must bind
any SSID with DHCP WAN connection, and turn on wireless wifi
function. When user configures wifi function, could refer to
WLAN configuration this chapter.

Company Address: Floor 6, Building F, Songbai Road 1008, Sunshine Community，Xili Street, Nanshan District, Shenzhen(518108)
Factory Address: Bldg B, Wentao Industrial zone, Yingrenshiyongxin Village, Shiyan Street, Baoan district, Shenzhen, Guangdong, China (518055)
Tel: [phone] Fax:[phone]
Website: www.cdatatec.com
P12
【Enable DHCP Server 】check this option;Normally, Terminal , connected to the
HGU ONU, will get an IP address from the ONU’s IP pool.
Therefore, we need to check this option to get the IP address.
【Enable NAT】Check ‘NAT’ feature;NAT is mainly used for address translation
function of local network and external network. The default is
checked enable status. If you do not check this option, maybe you
can’t surf the internet.
【Service List】Check “INTERNET”or“VOICE_INTERNET”;The broadband Internet
of routing mode is usually check the “INTERNET”,the latter
supports voice functions.
【VLAN Type】Configure this option according to our network plan.If the network
plans the vlan of broadband Internet, this item needs to choose
"tag";If the network has no vlan planning for broadband Internet
access, this option is "untag".
【Vlan ID】This will appear after the selection "tag", and the vlan id of the network
plan should be filled in.
【MTU】The default is 1492; if we can ping the DNS but not access to the website
via WEB broswer,we need to lower the value of MTU, such as 1400.
Note: the default port is unbound, and all the LAN ports go through this WAN.
When the device has a bridge WAN and a route WAN at the same time,it needs to
bind the port for each WAN (a LAN can only be bound to a WAN, can not bind to
multiple WAN connections at the same time.)
2..After configuring the parameters of DHCP WAN connection as below, click ‘Create’
to finish the setting：

Company Address: Floor 6, Building F, Songbai Road 1008, Sunshine Community，Xili Street, Nanshan District, Shenzhen(518108)
Factory Address: Bldg B, Wentao Industrial zone, Yingrenshiyongxin Village, Shiyan Street, Baoan district, Shenzhen, Guangdong, China (518055)
Tel: [phone] Fax:[phone]
Website: www.cdatatec.com
P13
5.1.3 Configure Static IP Address WAN Connection for Internet in Route Mode
1. Login ONU’s WEB, select Network->WAN->WAN Connection, and then there are
some parameters for us to configure as follows:
【IP Version】Select ‘Ipv4’; If there is Ipv6 in the network, we can select ‘Ipv4/Ipv6’.
【Type】Select ”Static”.
【Connection Name】Select “Create WAN Connection”.
【Port Binding】Band the physical ports (LAN1-4 Port ) with Static ip WAN connection.
Besides, if user want to use wifi function, must bind any SSID with
DHCP WAN connection, and turn on wireless wifi function. When
user configures wifi function, could refer to WLAN configuration this
chapter.
【Enable DHCP Server】check this option；Normally, Terminal , connected to the
HGU ONU, will get an IP address from the ONU’s IP pool. Therefore, we need to
check this option to get the IP address.

Company Address: Floor 6, Building F, Songbai Road 1008, Sunshine Community，Xili Street, Nanshan District, Shenzhen(518108)
Factory Address: Bldg B, Wentao Industrial zone, Yingrenshiyongxin Village, Shiyan Street, Baoan district, Shenzhen, Guangdong, China (518055)
Tel: [phone] Fax:[phone]
Website: www.cdatatec.com
P14
【Enable NAT 】Check ‘NAT’ feature;NAT is mainly used for address translation
function of local network and external network. The default is checked enable status.
If you do not check this option, maybe you can’t surf the internet.
【Service List】Check “INTERNET”or“VOICE_INTERNET”;The broadband Internet of
routing mode is usually check the “INTERNET”,the latter supports voice functions.
【VLAN Type 】Configure this option according to our network plan.If the network
plans the vlan of broadband Internet, this item needs to choose "tag";If the network
has no vlan planning for broadband Internet access, this option is "untag".
【Vlan ID】This will appear after the selection "tag", and the vlan id of the network
plan should be filled in.
【MTU】The default is 1492; if we can ping the DNS but not access to the website
via WEB browser, we need to lower the value of MTU, such as 1400.
【IP Address】Set static IP address;
【Subnet Mask】Set the mask of static IP address;
【Default Gateway】Set the default gateway of static IP address;
【DNS1】Set static primary DNS address and secondary DNS address;
【DNS2】Set static second DNS address and secondary DNS address;
【DNS3】Set static third DNS address and secondary DNS address;
Note: the default port is unbound, and all the LAN ports go through this WAN.
When the device has a bridge WAN and a route WAN at the same time,it needs to
bind the port for each WAN (a LAN can only be bound to a WAN, can not bind to
multiple WAN connections at the same time.）.
2. After configuring the parameters of Static WAN connection as below, click ‘Create’ to
finish the setting：

Company Address: Floor 6, Building F, Songbai Road 1008, Sunshine Community，Xili Street, Nanshan District, Shenzhen(518108)
Factory Address: Bldg B, Wentao Industrial zone, Yingrenshiyongxin Village, Shiyan Street, Baoan district, Shenzhen, Guangdong, China (518055)
Tel: [phone] Fax:[phone]
Website: www.cdatatec.com
P15
5.2 Configure Bridge WAN Connection for Internet
1.Login ONU’s WEB, select Network->WAN->WAN Connection, and then there are
some parameters for us to configure as follows:
【IP Version】Select ‘Ipv4’; If there is Ipv6 in the network, we can select ‘Ipv4/Ipv6’.
【Type】Select“Bridge”.
【Connection Name】Select “Create WAN Connection”.
【Port Binding 】Band the physical ports (LAN1-4 Port ) with Bridge WAN
connection. Besides, if user want to use wifi function, must
bind any SSID with DHCP WAN connection, and turn on
wireless wifi function. When user configures wifi function,

Company Address: Floor 6, Building F, Songbai Road 1008, Sunshine Community，Xili Street, Nanshan District, Shenzhen(518108)
Factory Address: Bldg B, Wentao Industrial zone, Yingrenshiyongxin Village, Shiyan Street, Baoan district, Shenzhen, Guangdong, China (518055)
Tel: [phone] Fax:[phone]
Website: www.cdatatec.com
P16
could refer to WLAN configuration this chapter.
【Enable DHCP Server 】uncheck this option;Normally, the terminal which had
connected to the HGU ONU, will get an IP address from the ONU’s
IP pool. Therefore, we need uncheck this option to avoid the
terminal get an IP from the ONU.
【Service List】Check “INTERNET”or“VOICE_INTERNET”;The broadband Internet
of routing mode is usually check the “INTERNET”,the latter
supports voice functions.
【VLAN Type】Configure this option according to our network plan.If the network
plans the vlan of broadband Internet, this item needs to choose
"tag";If the network has no vlan planning for broadband Internet
access, this option is "untag".
【Vlan ID】This will appear after the selection "tag", and the vlan id of the network
plan should be filled in.
Note: the default port is unbound, and all the LAN ports go through this WAN.
When the device has a bridge WAN and a route WAN at the same time,it needs to
bind the port for each WAN (a LAN can only be bound to a WAN, can not bind to
multiple WAN connections at the same time.
2. After configuring the parameters of Bridge WAN connection as below, click ‘Create’ to
finish the setting：

Company Address: Floor 6, Building F, Songbai Road 1008, Sunshine Community，Xili Street, Nanshan District, Shenzhen(518108)
Factory Address: Bldg B, Wentao Industrial zone, Yingrenshiyongxin Village, Shiyan Street, Baoan district, Shenzhen, Guangdong, China (518055)
Tel: [phone] Fax:[phone]
Website: www.cdatatec.com
P17
5.4 View the WAN Connection Status
1.Login ONU WEB, select Status ->Network Information-> IPv4 Connection. In here,
we can view the route WAN connection status, check the route WAN connection whether
it gets an IP address , As follows: